• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.317-318
• /
• 2007

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.5-14
• /
• 2003

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.3
• /
• pp.266-272
• /
• 2014

This study proposes a closed-loop shaping control method with $H_{\infty}$ optimization for optical image stabilization (OIS) in mobile phone cameras. The image stabilizer is composed of a horizontal stage constrained by ball bearings and actuated by the magnetic force from voice coil motors. The displacement of the stage is measured by Hall effect sensors. From the OIS frequency response experiment, the transfer function models of the stage and Hall effect sensor were identified. The weight functions were determined considering the tracking performance, noise attenuation, and stability with considerable margins. The $H_{\infty}$ optimal controller was executed using closed-loop shaping and limiting the controller order, which should be less than 6 for real-time implementation. The control algorithm was verified experimentally and proved to operate as designed.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.191-199
• /
• 1999

In designing the tracking system of an optical disc drive, it is first necessary to eliminate the undesired influence of any visible mechanical vibrations. In this paper a geometrical method to analyze the frequency response of an elastically supported planar rigid body has been presented. Using the theory of screw, a geometrical expression of a compliant transfer function which describes the effects of the locations of an applied force and observation on the response has been derived. Applying the substructure synthesis method, a technique to stabilize the tracking mechanical system has been presented with a numerical example.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.46-52
• /
• 2000

산업사회가 발전하면서 초정밀 분야의 측정기술 또한 시대적 요구에 걸맞게 발전을 거듭하고 있다. 광을 이용한 측정기술에 있어서 보다 작은광 스팟의 구현은 높은 분해능을 위해서 필수 불가결한 조건이며, 광 기록분야에 있어서는 높은 기록밀도를 위해 핵심적인 기술이다. 하지만 스팟의 직경은 광의 회절한계(diffraction limit)에 의한 최소치를 갖는다. 예로서, 측정을 위한 광학 현미경 중 현재 일반적으로 널리 쓰이는 고배율 광학 현미경(high resolution optical microscope)은 측정 대상 표면에 물리적 손상을 주지 않으며, 측정 범위가 크고, 값이 싼 장점이 있다.(중략)

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.974-979
• /
• 2003

As recently optical communication industry is developed, request of optical communication part is increased. Ferrule is very important part which determines transmission efficiency and quality of information in the optical communication part. Most of ferrule processes are grinding which request high processing precision. Particularly, concentricity and cylindricity of inner and outer diameter is very important. The co-axle grinding process of ferrule is to make its concentricity all of uniform before centerless grinding. Surface integrity of ferrule is affected by kind of grinding wheels, grinding conditions, and characteristic of workpiece and equipment. In this study, surface integrity of workpiece according to change of grinding wheel speed, feed rate, regulating wheel speed and grinding force is investigate to improve the concentricity and roundness of ferrule from many experiments.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.269-274
• /
• 1999

As the semiconductor industry enters the next century, we are facing to the technological changes and challenges. Optical lithography has driven by the miniaturisation of semiconductor devices and has been accompanied by an increase in wafer productivity and performance through the reduction of the IC image geometries. In the last decade, DRAM(Dynamic Random Access Memories) have been quadrupoling in level of integration every two years. Korean chip makers have been produced the memory devices, mainly DRAM, which are the driving force of IC＇s(Integrated Circuits) development and are the technology indicator for advanced manufacturing. Therefore, Korean chip makers have an important position to predict and lead the patterning technology. In this paper, we will be discussed the limitations of the optical lithography, such as KrF and ArF. And, post optical lithography technology, such as E-beam lithography, EUV and E-beam Projection Lithography shall be introduced.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.362-365
• /
• 2004

'Coil' occupies a much important position in delivering driving force of optical pick-up actuators. Up to now the main stream has been a winding coil type actuator, but actuators using FP-Coil(Fine Pattern Coil) have been considered for the more compacted and simple manufacturing process and have variously spreaded the application fields by product. We have tried to design actuators using PCB-Coil(Printed Circuit Board Coil) which has benefits in terms of price and manufacturing process. Especially this research has two main things those are to reduce the vibration of sub-resonance and to assure the do sensitivity in the performance of asymmetric optical pick-up actuator with PCB-Coil.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.195-199
• /
• 2004

Recently, optical disc drives are required to have high density and capacity in according with development of high definition images and rapid increase of various informations. Consequently, the numerical aperture becomes larger, the wavelength of laser is coming to be short. However, it deteriorates rolling mode effect on an optical pickup actuator. Therefore, this paper proposes new design and optimization of tracking coils for reducing it. First, we verify that discord between the center of force and the center of mass by restrictions of design condition is an important factor of rolling mode effect. Then, in order to reduce it, we propose new design parameters of tracking coils. Finally, we reduce rolling mode effect through optimization of tracking coils using Taguchi method and response surface method.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1743-1744
• /
• 2008

NSOM(Near-field Scanning Optical Microscopy) 조화 진동자(Tuning fork)와 광섬유 탐침을 결속시켜 미소신호를 검출하여 증폭과 잡음을 제거하기 위한 Pre-amplifier의 설계 및 제작과 더불어 시료-탐침간 거리를 파장보다 짧게 유지시키는 Shear force 검출, 효율적인 시료-탐침 거리유지 알고리즘 구연 및 탐침을 시료 표면에서 일정한 거리를 안정적으로 유지하도록 제어 및 시료의 높이 정보를 얻어내는 시스템을 설계 및 제작하였다. 또한 ����$CO_2Laser$를 이용한 Heat Pulling 장치개발을 통해 탐침을 제작, LabVIEW를 통해 개별적인 시스템을 하나로 통합하여 AFM 테스트 시료인 SiO 샘플의 표면 형상을 측정하였다.