• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.2
• /
• pp.119-123
• /
• 2006

This work presents the fabrication and characteristics of $Bi_2O_3/Si$ heterojunction prepared by rapid thermal oxidation technique without any postdeposition annealing condition. The bismuth trioxide film was deposited onto monocrystalline Si and glass substrates by rapid thermal oxidation of bismuth film with aid of halogen lamp at $500^{\circ}C/\;45$ s in static air. The structural, optical and electrical properties of $Bi_2O_3$ film were investigated and compared with other published results. The structural investigation showed that the grown films are polycrystalline and multiphase (${\alpha}-Bi_2O_3$ and ${\beta}-Bi_2O_3$). Optical properties revealed that these films having direct optical band gap of 2.55 eV at 300 K with high transparency in visible and NIR regions. Dark and illuminated I-V, CV, and spectral responsivity of $Bi_2O_3/Si$ heterojunction were investigated and discussed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.874-879
• /
• 1987

An exact wave-optics analysis of wave propagation in thin-film optical waveguide using gyrotropic materials as the substrate or film of the guide is presented for the first time. Based on the Maxwell's equations and the boundary conditions of the guide, the field composition and the boundary conditions of the guide, the field composition and the phase velocity for the eigenmodes of the guide are determined. The field patterns of the guided waves are shown for the eigenmodes of the guides. The present analysos allows a new interpretation in the mode conversion of the thin-film optical waveguides.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.55-61
• /
• 2021

In this paper, we proposed and implemented defect detection methods of polarized film with half-wave phase retardation plates. We investigated the principles of phase retardation compensation and optical principle of half-wave phase retardation plates. We analyzed of samples of polarized film with half-wave phase retardation plates. The optical defect detection methods are proposed and the performance is validated with experiments.

• Journal of the Korean Vacuum Society
• /
• v.5 no.2
• /
• pp.147-155
• /
• 1996

Optical properties of $TiO_2/M/Ag/M/TiO_2$ films have been changed with the diffusion barrier metal M. Optimum opticla properties of $TiO_2/M/Ag/M/TiO_2$ as the transparent heat mirror film, could be obtained with Ti among diffusion barrier metals of Ti, Cu, Zr and Al. $TiO_2/M/Ag/M/TiO_2$ film, which was fabricated by sputtering of 18 nm-thick $TiO_2$ and Ag, and 4nm-thick Ti, showed maximum transimittance of 89% at visible wavelength and infrared reflectance of 97% at wavelength of 3000 nm. Optical properties of this film was not degraded by Xenon-sunshine weather test for 240 hours. For specimens with barrier layers of Cu, Zr, and Al, degradation of optical properties by weather test was increased in a sequence of films with Cu, Zr, and Al barrier layers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1580-1583
• /
• 2008

We propose an optical configuration for a vertical alignment (VA) liquid crystal (LC) cell to eliminate the off-axis light leakage in the dark state. The proposed compensation configuration consists of a positive A-film, a positive C-film and a negative C-film. The optical design is performed on a Poincar$\acute{e}$ sphere. This configuration has a better tolerance to the wavelength dispersion, as the polarization trace could self-compensate it. From calculations, we show that the proposed VA LC cell can improve the viewing angle characteristics by compensating for the light leakage in the diagonal direction.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.683-686
• /
• 2006

Accompanied by the demand of thin type TV, the application of the TFT LCD display device is more and more extensive. The key material which influences the optical performance of the TFT LCD is optical film. Due to the rapid development of the big size TFT LCD for the recent years, the supply has been unable to meet the demand for its relative material. Therefore, we bring up a alternate choice-the hybrid compensation film which could not only show well optical performance, but also lessen the quantity of usage in TAC in order to make the optical film free of shortage.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.347-350
• /
• 2013

By inserting a very thin metal layer of Ag between two outer oxide layers of amorphous silicon indium zinc oxide (SIZO), we fabricated a highly transparent SIZO/Ag/SIZO multilayer on a glass substrate. In order to find the optimized thickness of Ag layers, we investigated the variation of optical properties depending on Ag thickness. It was found that the transition of Ag layer from island formation to a continuous film occurred at a critical thickness. Continuity of the Ag film is very important for optical properties in SIZO/Ag/SIZO multilayer. With about 15 nm thick Ag layer, the multilayer showed a high optical transmittance of 80% at 550 nm and low emissivity in IR.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.19-24
• /
• 2000

Optical transmission characteristics of retardation film for obliquely incident light is calculated by using extended Jones calculus and it is geometrically interpreted on Poincare sphere representation as rotational transformation. The characteristics of a retardation film is that while the rotation axis is fixed at a point on the Equator of the Poincar sphere, the rotation angle varies with the direction of incidence. This property can be compensated by using a tandem arrangement of the two optical films whose optic axes do not coincident, and this method can be used for the improvement of the viewing angle characteristics of BTN cells. cells.

• Macromolecular Research
• /
• v.15 no.3
• /
• pp.211-215
• /
• 2007

Hybrid thin film nanostructures composed of metal nanoparticles (NPs) and self-assembled polymer films with different spatial distributions of NPs were analyzed by optical waveguide spectroscopy (OWS). Specifically, the dielectric constants were calculated using effective medium theory for the incorporation of 1 vol% Au NP into the block copolymer (BCP) films having a cylindrical nanodomain morphology. Three cases were considered: uniform distribution of NPs in the film; selective distribution of NPs only in the cylindrical domains; and segregation of NPs to the center of the cylindrical domains. The optical waveguide spectra derived from the calculated dielectric constants demonstrate the feasibility of experimentally distinguishing the composite nanostructures with different inner morphologies in the hybrid metal NP-BCP nanostructures, by the measurement of the dielectric constants using OWS.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.8
• /
• pp.707-712
• /
• 1996

Growth and changes of electronically conducting polypyrrole (PPy) in the form of thin films polymerized on metal electrodes were investigated by electrochemical and in situ three-parameter ellipsometry methods at the wavelength of 632.8 nm. Although the optical equations produced multiple sets of solution, it was possible to determine a unique set of thickness and the optical constants of a film by auxiliary measurements and/or physical reasoning. The changes in the thickness and the optical properties of the polymers during polymerization and electrochemical oxidation/reduction was successfully followed by the three-parameter ellipsometric technique. The optical properties of the polymers continuously changed as the film grew. The imaginary part of the refractive index of polypyrrole seemed to be dominantly determined by the existence of an absorption band around the visible range.