• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.343-344
• /
• 2009

Pump wavelength dependence of the gain spectra was investigated by simulating the model of single-pumped fiber optical parametric amplifiers (FOPAs). Conditions for the single-pumped FOPAs having broad bandwidths with relatively large gains were optimized and the gain bandwidth was found to be as large as 146.4 nm when signal power and pump power were 316 nW and 7 W, respectively.

• Photonics industry news
• /
• s.34
• /
• pp.12-17
• /
• 2006

대만은 광산업 분야를 OE(Optoelectronics Components, FPD(Flat Panel Display), Optical Storage, Optical Lens Components & Laser Applications, OFC(Optical Fiber Communications, Optical Input & Output Devices 등 6개 대분류로 나누고 있으며 수년간 중점적으로 육성해 온 분야는 OE 및 FPD와 관련이 큰 LED 분야이다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.10
• /
• pp.43-47
• /
• 2002

A simple optical signal to noise ratio monitoring method using fiber Bragg grating is proposed for monitoring performance of OADM. OSNR of each channel is determined by monitoring the optical power transmitted and reflected from fiber Bragg gratings, simultaneously. We have obtained OSNR with accuracy better than 0.8㏈ compared with OSA of 0.1nm optical resolution in the wide input power range between -6 ㏈m and -23㏈m per channel.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.3
• /
• pp.7-13
• /
• 2007

In the optical module for optical communications, the flip chip bonding is used fer the precise alignment of the optical fiber and optical device. In flip chip bonding, the optical device is aligned and welded while observing the alignment mark of substrate and chip by using flip chip bonder in order to bond the optical device at the exact position. In this research, optical passive alignment method of photodiode(PD) flip chip bonding is suggested for low cost optical subassembly. By using the visible He-Ne laser (633nm wavelength), photodiode is easily aligned with emitting spot on the optical fiber with the help of stereoscopic alignment system. We compensated wavelength dependent deviation about 4m to find out real alignment position of 1550nm input laser by ray tracing. The maximum optical coupling efficiency between the optical fiber and photodiode was about 23.3%.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.280-285
• /
• 2007

Based on the multimode fiber taper, a mode size converter for effective optical beam coupling between laser and optical fiber or between the two different optical fibers has been proposed and demonstrated. The device has a multimode input end and a single mode output end. The influence of various parameters, including device structure and launching conditions, on the coupling efficiency has been theoretically analyzed. The theoretical results revealed that the gaussian beam can be coupled into a single mode fiber without considerable insertion loss. The proposed multimode fiber taper has been fabricated using heating and pulling equipment incorporating two micro-torches. Experimental results showed that an optical beam with $50\;{\mu}m$ of large beam size was effectively coupled into single mode fiber through the multimode fiber taper. The insertion loss of the device was 1.3 dB.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.513-516
• /
• 2006

Experimental demonstration of bipolar spectral encoding code-division multiple-access with modified pseudorandom noise codes is presented. Bipolar spectral encoding is achieved with an erbium-doped fiber amplifier amplified spontaneous emission source and arrayed waveguide gratings. The bit-error rate performance of 1.25 Gbps signal transmission over 80 km single mode fiber is measured in a multiple-user environment.

• Journal of the Optical Society of Korea
• /
• v.9 no.2
• /
• pp.49-53
• /
• 2005

We report a new configuration of a reflection-type confocal scanning optical microscope system for measuring the refractive index profile of an optical waveguide. Several improvements on the earlier design are proposed; a light emitting diode (LED) at 650 nm wavelength instead of a laser diode (LD) or He-Ne laser is used as a light source for better index precision, and a simple longitudinal linear scanning and curve fitting techniques are adapted instead of a servo control for maintaining an optical confocal arrangement. We have obtained spatial resolution of 700 nm and an index precision of $2\times10^{-4}$. To verify the system's capability, the refractive index profiles of a conventional multimode fiber and a home-made four-mode fiber were examined with our proposed measurement method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.4
• /
• pp.139-144
• /
• 1983

In this paper, the ploarization and Faraday rotation properties of the single mode optical fiber have been investigated for magnto-optic current transformer application. On the analysis, the optical fiber is modeled as a linear retarder and the intrinsic birefreingence of the optical fiber is approximately found to be 2.57'/m from the measurement, and the bend-induced birefringence is proportional to the inverse square of bending radius. The polarization rotation sensitivity is foung to be F/H=1.4x$10^-5$rad/[A/m] from the analysis of Faraday rotation of single mode optical fiber.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.51-58
• /
• 2006

A variety of systems have been attempted for effective urban management. In this paper we introduce the Integrated Urban Management System (IUMS), which consists mainly of an optical line terminal (OLT), optical network terminals (ONTs) and wireless access points (APs), by combining passive optical network (PON) and radio over fiber (RoF) technologies so as to take advantage of both systems. Further, several IUMS services such as a disaster detection and prevention system (DDPS), a bus information system (BIS) and a real time location system (RTLS) we demonstrated in order to verify the employment of IUMS for the realization of a future ubiquitous city (U-city).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.4
• /
• pp.278-285
• /
• 1990

It is well know that optical oupler that is composed of the polished single-mode optical fiber can separate two arbitrary wave lengths. Wavelength division ranges of the WDM optical coupler that is made of the bending fiber with radius R vary with the center wavelength of the signal and spacing between two cores. In this paper, when optical fiber is fixed with the radius R, We proposed the spacing between two cores that can provide minimum division range. Also, We proposed the minimum radius R necessary to separate two arbitary wavelengths of the signal.