• Transactions of the Society of Information Storage Systems
• /
• v.3 no.1
• /
• pp.1-4
• /
• 2007

A high density optical data storage device has been required for many years. In the field of the optical data storage, a near-field recording (NFR) technology is considered as a next generation one for achieving the high data density. Due to an evanescent wave effect occurred under 100nm distance which is the excessively small distance between the SIL and the disc, the most significant and difficult problem in this technology is to maintain a gap between a solid immersion lens (SIL) and a disc. Also, maintaining the gap under at least 50nm is required in the NFR gap servo system to use the evanescent wave effect efficiently. There are some institutes that have shown the novel gap servo control. In general, they use a mode switching servo method which consists of approach, hand-over and gap control mode. However there is a critical problem such as an overshoot at the tuning point from the approach mode to the hand-over mode, which may cause a collision between the SIL and the disc. In this paper, we show our NFR system and an improved gap servo system using an exponential function as the approach mode which can reduce the overshoot.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.977-982
• /
• 2001

In this paper, we deal with the analysis and optimum design of a disc drive feeding system. Using this proposed design method, we can determine an optimal step motor and lead-screw for the shorter seek time and required seek resolution. Simulation results show that this method can be potentially implemented in the design of a feeding system.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.260-261
• /
• 2003

최근들어 플라스틱 렌즈는 여러 분야에 응용되고 있으며 광학적 시스템에도 널리 사용되고 있다. 광학적 플라스틱은 제작이 용이하고 크기에 제한을 받지 않아 그 수요가 크게 확대되고 있다. 그러나, 광학적인 시스템에 사용되기 위해서는 높은 순도가 요구되면서 또한 재질의 균일성이 확보되어야 하고 개구율이 점차 높아 가는 현실에서는 그 특성의 연구가 또한 중요하다. 본 연구에서는 간섭계를 구성하여 광학 디스크 경사에 따른 파면을 측정하고 광학수차 평가를 통하여 광학적인 시스템에 미치는 영향을 분석하였다. (중략)

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.232-233
• /
• 2008

There are various large shocks in optical disc drive system like human touch and speak sound. In this paper, a nonlinear controller and a detection method are proposed. First, a relay nonlinear controller with dead zone is introduced. The structure of this nonlinear controller is simple and has a small amount of calculation. However, this controller has chattering problem when it is working. We suggest a disturbance detection algorithm using Kalman filter in this paper and it shows effective reduction of chattering. The proposed nonlinear controller using this detection algorithm had good performance for the shock.

• Journal of Photoscience
• /
• v.10 no.2
• /
• pp.209-214
• /
• 2003

A series of coupled-hemicyanine dyes with alkylene spacer were successfully synthesized by a reaction of coupled aldehydes with corresponding salts, respectively. These coupled dyes had more excellent thermal properties (high decomposition temperature, stiff decomposition behavior) and higher molar absorption properties than an uncoupled dye. The coupled dyes with perchlorate anions showed the strongest exothermic decomposition while those with hexafluorophosphorate anions showed endothermic decomposition. As the coupling length (n=3, 4, 5, 6) increased, thermal properties decreased and dyes with even spacer was more thermally stable than dyes with odd spacer. Among several coupled dyes, C4-NP-ClO4 and C4-Cl-ClO4 exhibited the best recording properties with the lowest jitter value of 7.5∼9.5% in authoring disc.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.12
• /
• pp.1255-1260
• /
• 2004

A moving-magnet type pickup actuator has an assembly error. That is, the actuating Part of an actuator is shifted from initial position after we assemble it into yoke. This Is the result of an effect of magnetic force between magnet and yoke. We performed magnetic-analysis using FEA. As a result of simulation, we improved the assembling efficiency for moving-magnet type actuator.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.1000-1003
• /
• 2002

For high density optical storage, there should be a high NA objective lens and a shorter wavelength laser diode. To secure the disc tilt margin related to the coma aberration, moreover, it's difficult to apply the tilt compensation mechanism into the portable PC. In this paper, we proposed the 3-axis asymmetry pickup actuator with high efficiency symmetric magnetic circuit, which consisted of the top cover type inner yoke for high magnetic flux density, the coil stack unit for the 3-axis independent operation and vertically polarized magnets. This newly suggested actuator features DVD-RAM recording, we achieved the high focus & track AC sensitivity and the greatly stabilized system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1295-1300
• /
• 2001

This paper presents the system that decreases the Jitter value having an important effect for signal quality in optical disc memory. Level controller of input signal was made and applied to line between format generator and laser beam recorder of DVD. This try means to decrease jitter value without adjustment for many kinds of mastering process. Experimental results show that the jitter value is about 6.9%.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.7
• /
• pp.683-687
• /
• 2009

Track jump control is a random access strategy for short distance movement. The most common track jump scheme is a bang-bang control of a kick and brake manner. In a conventional track jump scheme, a track-following compensator is turned off during kick and brake periods, and restarted at a target track for track pull-in. The inevitable controller switching with non-zero initial condition results in undesirable transient response, and excessive overshoot in the transient response causes track pull-in failure. In this paper, a new track jump scheme is proposed for enhancing track jump stability. Instead of control switching, internal states of a track-following controller are artificially manipulated for kick and brake actions in a digital control environment. Experimental results are provided in comparison with conventional track jumps.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.378.1-378
• /
• 2002

DVD, HD(High Density)-DVD등의 고밀도 광 디스크의 광 기록재생장치는 고 개구율(Numerical Aperature)의 대물렌즈로 집광 빔의 크기를 소형화하여 기록용량을 증대시키고 있다. 이 경우 광축과 광 디스크의 기록면에 대한 경사는 광학적인 수차가 발생되어 신호 레벨의 저하나 기록시의 피트(pit) 형성의 오류, Crosstalk등의 문제가 발생한다. 이를 극복하기 위해 직접 디스크의 경사에 따라 제어할 수 있는 픽업 구동기가 제안되어 왔지만 주로 Half Height(12.7mm)에 사용되는 틸트 구동기였으며 Slim(6.3mm)형 틸트 구동기는 제안되지 못하였다. (중략)