• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.643-648
• /
• 2003

The phase-shifting diffraction-grating interferometer proposed in the investigation uses a diffraction grating that performs manifold functions of beam splitting, beam recombination, and phase shifting. The reference and measurement waves generated by means of diffraction have different amplitudes depending on their orders of diffraction, so the interference fringe pattern resulting from the two waves tends to yield poor visibility. To cope with this problem, we select a phase grating of reflection type and attempt to improve the interference visibility with optimization of the groove shape of the grating through electromagnetic analysis.

• Rubber Technology
• /
• v.9 no.1
• /
• pp.25-28
• /
• 2008

By combining the multi-faceted environmental responsiveness of polymer hydrogels with photonically active structures, there has been a significant effort to create color-tunable photonic crystal sensors by changing either the periodic spacing of the structure or the dielectric constants of the materials. Here, we show that reversible spiral and helical opal switches with both dimensional and optical functionalities that respond to environmental chemistry can be constructed. When the transparent opal switch is swollen in hydrophilic acetic acid, right-handed spirals and helices that exhibit angularly dependent colors from Bragg diffraction are formed. When the transparent opal switch is swollen in hydrophobic hexane, left-handed spirals which exhibit angularly dependent colors from Bragg diffraction are formed. When the transparent opal switch is swollen in hydrophobic hexane solvent, a left-handed spiral and helix with an angularly independent bluish color is formed. After deswelling, all switches returned back to the transparent planar state. These color-tunable, reversible spiral and helical opal switches can be useful as mechanical actuators, and electrical devices as well as optical components.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.8
• /
• pp.62-70
• /
• 1997

In this paper, we presetn a new method to display 3-D image modelled as a sum of 2-D sliced images by expanding the concept of the conventional 2-D optical correlator based on spatial matched filtr to the 3-D region. It is hsown that a arbitrary image can be constructed by an array of the correlation-peaks between pixel-to-pixel and propose the systhesis precedure of 3-D spatial-matched-fjilter using fresnel diffraction equation to display 3-D image in space. It is also shown that the quantization problem is severe when the systehsised filter function is displayed on the conventional LC-SLM. To overcome this problem, anonlinear quantizaton method using the sigmoid function is suggested, and this method can reduce the bias and the loss of high spatial-frequency information, and improve the diffraction efficiency. Finally, the suggested method is tested by computer simulation and then approved by some optical experiments with the conventional LC-SLM.

• Ceramist
• /
• v.10 no.3
• /
• pp.55-66
• /
• 2007

Infrared Scanning Near-field Optical Microscopy (IR-SNOM) is an extremely powerful analytical instrument since it combines IR spectroscopy's high chemical specificity with SNOM's high spatial resolution. In order to do this in the infrared, specialty chalcogenide glass fibers were fabricated and their ends tapered to generate SNOM probes. The fiber tips were installed in a modified near field microscope and both inorganic and biological samples illuminated with the tunable output from a free-electron laser located at Vanderbilt University. Both topographical and IR spectral images were simultaneously recorded with a resolution of ${\sim}50\;nm$ and ${\sim}100\;nm$, respectively. Unique spectroscopic features were identified in all samples, with spectral images exhibiting resolutions of up to ${\lambda}/60$, or at least 30 times better than the diffraction limited lens-based microscopes. We believe that IR-SNOM can provide a very powerful insight into some of the most important bio-medical research topics.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.21-26
• /
• 2002

In the conventional star coupler, a certain amount of loss should be expected because lateral diffraction is used for the power distribution. In this paper, we propose a new design of a low loss star coupler which employs UV-written tapered waveguides and an AWG based on the low loss star couplers, and investigate their various characteristics. The loss of the UV-written star coupler is lower than that of the conventional star coupler, and the AWG device based on the UV-written star couplers shows low loss characteristics.

• Journal of the Optical Society of Korea
• /
• v.14 no.2
• /
• pp.127-130
• /
• 2010

We have developed an efficient electron beam (e-beam) source, a microcolumn, that can be used as a source module for of microscopy and its applications. To obtain a low operating voltage, a very sharp cold field electron emitter was developed by electrochemically etching a tungsten wire. Laser diffraction was used for the fabrication of high-quality electron lenses and for their precise alignment. The measurement of the e-beam currents, and SEM images captured by the microcolumn confirmed the potential of the device as a very good e-beam source.

• Journal of the Optical Society of Korea
• /
• v.11 no.4
• /
• pp.183-191
• /
• 2007

The highest diffraction efficiency(DE) value after illumination and post-curing of photopolymer films were obtained at the $SeO_2$/Acrylamide(AA) Ratios of AA 3.0 g, $SeO_2$ 1.0g and the DE's were stable values of over 90%. By the addition of $SeO_2$, the maximum DE at the initial stage of illumination was reached at 300 seconds, which suggests $SeO_2$ slows down the photopolymerization of AA, which enhances the maximum DE value by giving more migration time. DE variation curve for the optimum composition during extended-time illumination of 9,000 seconds resembles a sine curve due to the combination of the monomer diffusion and the photopolymerization, and the photopolymer film expanded by about 8% after photopolymerization due to monomer migration.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.762-765
• /
• 2014

We fabricated a periodically poled lithium niobate (PPLN) by direct laser-writing of a quasi-phase-matching (QPM) structure in photolithographic process. Because we do not need to prepare a photomask by electron-beam writing, the "maskless" process shortens the fabrication time and significantly reduces the cost. We evaluated the poling quality of the direct laser-written PPLN by measuring the diffraction noise from the surface relief pattern of the fabricated QPM grating and comparing the results to those from a conventional PPLN made with a photomask. The quality of the PPLN fabricated by direct laser-writing was shown to be equivalent to that fabricated by the conventional method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.863-866
• /
• 2012

The optical system develops remarkably as well as the development of civilization. The modulation transfer function(MTF) was introduced as one of the important estimation methods to estimate the performance of optical systems. The calculation of MTF is very boring and tiresome. We express the MTF curves three primary colors of light in the diffraction-limitted systems.

• Journal of the Optical Society of Korea
• /
• v.9 no.1
• /
• pp.32-35
• /
• 2005

In light microscopy, spatial resolution is limited by diffraction effect. Confocal microscopy has improved resolutions in both lateral and axial directions, but these are still limited by diffraction effect. Confocal self-interference microscopy (CSIM) uses interference between two perpendicularly polarized beams to enhance lateral resolution. In previous research, we proposed a calcite plate with its optic-axis perpendicular to the propagation angle and one of the boundary surfaces of the plate. This type of plate is not widely used to our knowledge. In this paper, we change the calcite plate to more common one, which is commercially available. This calcite plate has its optic axis in the plane of incidence. We analyze the characteristics of this calcite plate and numerically compare the performances of CSIM in previous research and CSIM with the commercial calcite plate. Numerical results show improved performance when using the commercial calcite plate