• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.162-167
• /
• 1998

$SiO_xF_y$ optical thin films of lower refractive indices than glass substrates were fabricated by the CF$_4$ ion beam assisted deposition method and the optical, structural and chemical properties of them were investigated. Refractive index of $SiO_xF_y$ films was varied from 1.455 to 1.394 by decreasing the anode voltage or from 1.462 to 1.430 by increasing the current density of end-Hall ion source. FT-IR and XPS analyses show that as the F concentration increases, the Si-O bond at $1080m^{-1}$ shifts to higher wavenumber, the OH bonds are reduced drastically, and the fluorine atoms at the air-film interface are desorbed out by reacting with $H_2O$ in the atmosphere. $SiO_xF_y$ thin films are amorphous by the XRD analysis and have the compressive stress below 0.3 GPa. As an application of $SiO_xF_y$ thin films a two-layer antireflection coating was fabricated using a $SiO_xF_y$ film as a low refractive index layer and a Si film as an absorbing one.

• Journal of the Korean Ceramic Society
• /
• v.49 no.5
• /
• pp.399-403
• /
• 2012

SnO thin films were fabricated by rf reactive sputtering on borosilicate substrates with an Sn target and Ar/$O_2$ gas mixture. The effect of rf power on the structural, electrical, and optical properties of SnO thin films was investigated with XRD, AFM, SEM, Hall effect measurements, and UV-Vis spectrometer. As a plasma power increased the crystallinity with a preferred orientation of SnO thin films was improved and the grain size slightly increased. However the grains were coalesced and excessively irregular in shape. The electrical conductivity of SnO thin films demonstrated a relatively low p-type conductivity of 0.024 $(Wcm)^{-1}$ at a higher power condition. Lastly, SnO thin films had poor optical transmittance in the visible range as a plasma power increased.

• Textile Coloration and Finishing
• /
• v.26 no.4
• /
• pp.305-310
• /
• 2014

In this study, we presented a newly synthesized pyrene-naphthalene diimide(NDI)-pyrene triad. The optical and structural properties were examined using various characterization techniques. A donor-acceptor-donor triad molecule exhibited a strong charge transfer, though there existed neither intramolecular nor intermolecular hydrogen bonding sites, due to the formation of preferential complementary complex between pyrene and NDI. Powder XRD measurement revealed a sharp and distinctive X-ray patterns, indicating the presence of microcrystalline-like structure. POM images showed anisotropic fingerprint texture similar to that of cholesteric phase, and SEM images showed numerous columnar structures with length of 1 to $10{\mu}m$. Above observation clearly demonstrated that ${\pi}$-complementary NDI-pyrene interactions in the traid was strong enough to form columnar aggregates in the long range.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.368-368
• /
• 2007

Zinc oxide (ZnO) has drawn much interest as a potential transparent conducting oxide (TCO) for applying to solar cell and front electrode of electro-luminescent devices. For the enhancement of electrical property of TCOs, dopant introduction and hybridization with conductive nanoparticles have been investigated. In this work, ZnO films were formed on glass substrate by using photochemical solution deposition of Ag nanoparticles dispersed or various metal (Ag, Cd, In, or Sn) contained photosensitive ZnO solutions. The usage of photosensitive solution permits us to obtain a micron-sized direct patterning of ZnO film without using conventional dry etching procedure. The structural, optical, and electrical characteristics of ZnO films with the introduction of metal dopants with/without Ag nanoparticles have been investigated to check whether there is a combined effect between metal dopants and Ag nanoparticles on the characteristics of ZnO film. The phase formation and crystallinity of ZnO film were monitored with X-ray diffractometer. The optical transmittance measurement was carried out using UV-VIS-NIR spectrometer and the electrical properties such as sheet resistance and conductivity were observed by using four-point probe.

• Journal of Sensor Science and Technology
• /
• v.31 no.6
• /
• pp.371-375
• /
• 2022

Antimony-doped tin oxide (ATO) thin films, one type of transparent conductive oxide (TCO) films, were prepared on a SiO₂-coated glass substrate with different substrate temperatures by a radio-frequency magnetron sputtering system. Structural, optical, and electrical characteristics of the deposited ATO films were analyzed using X-ray diffraction, scanning electron microscopy, alpha-step, ultraviolet-visible spectrometer, and Hall effect measurement. The substrate temperature during deposition did not affect the basic crystal structure of the films but changed the grain size and film thickness. The optical transmittance of the ATO films deposited at different substrate temperatures was over 70%. The lowest sheet resistance and resistivity were 8.43 × 10² Ω/sq, and 0.3991 × 10^-2 Ω·cm, respectively, and the highest carrier concentration and mobility were 2.36 × 10²¹ cm^-3 and 6.627 × 10^-2 cm²V^-1s^-1, respectively, at a substrate temperature of 400 ℃.

• Journal of the Korean Ceramic Society
• /
• v.56 no.2
• /
• pp.173-177
• /
• 2019

Thermal properties of a SiO₂-B₂O₃-BaO ternary glass system depending on compositional change of BaO have been examined to find a proper sealing material for reversible oxide cells. Glass transition temperature and thermal expansion coefficients increased simultaneously up to 55 mol% of BaO content. The structural role of BaO with regard to the thermal properties has been discussed on the basis of Raman spectroscopy results. Flowability of the glass at sealing temperature has been examined with packed glass powders of 12 mm diameter along with a high temperature optical microscope. The practical sealing property of the glass was also examined with YSZ coated with NiO-yittria stabilized zirconia (NiO-YSZ) and it showed good adhesion without noticeable reaction with NiO-YSZ layer.

• Current Photovoltaic Research
• /
• v.4 no.3
• /
• pp.114-118
• /
• 2016

$Cu_{1.8}Zn_{1.2}(Sn_{1-x}Ge_x)S_4$ (CZTGeS) nanocrystals were mechanochemically synthesized from elemental precursor powders without using any organic solvents and any additives. The composition of CZTGeS nanocrystals were systematically varied with different Ge mole fraction (x) from 0.1 to 0.9. The XRD, Raman spectroscopy, high-resolution TEM, and diffuse reflectance studies show that the as-synthesized CZTGeS nanocrystals exhibited consistent changes in various structural and optical properties as a function of x, such as lattice parameters, wave numbers for $A_1$ Raman vibration mode, interplanar distances (d-spacing), and optical bandgap energies. The bandgap energy of the synthesized CZTGeS nanocrystals gradually increases from 1.40 to 1.61 eV with increasing x from 0.1 to 0.9, demonstrating that Ge-doping is useful means to tune the bandgap of mechanochemically synthesized nanocrystals-based kesterite thin-film solar cells. The preliminary solar cell performance is presented with an efficiency of 3.66%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.2
• /
• pp.137-141
• /
• 2009

AZO transparent conductive thin films were grown on $SiO_2$/Si and glass substrates using diethylzinc (DEZ) and trimethylaluminium (TMA) as the precursor and $H_2O$ as oxidant by atomic layer deposition. The structural, electrical, and optical properties of the AZO films were characterized as a function of film thickness at a deposition temperature of $150^{\circ}C$. The AZO films with various thicknesses show well-crystallized phases and smooth surface morphologies. The 190-nm-thick AZO films grown on Coming 1737 glass substrates exhibit rms(root mean square) roughness of 8.8 nm, electrical resistivity of $1.5{\times}10^{-3}\;{\Omega}-cm$, and an optical transmittance of 84% at 600nm wavelength. Atomic layer deposition technique for the transparent conductive oxide films is possible to apply for the deposition on flexible polymer substrates.

• Journal of Surface Science and Engineering
• /
• v.47 no.4
• /
• pp.181-185
• /
• 2014

We investigated the structural, electrical and optical characteristics of IGZO thin films deposited by a room-temperature RF reactive magnetron sputtering. The thin films deposited were annealed for 2 hours at various temperatures of 300, 400, 500 and $600^{\circ}C$ and analyzed by using X-ray diffractometer, transmission electron microscopy, atomic force microscope and Hall effects measurement system. The films annealed at $600^{\circ}C$ were found to be crystallized and their surface roughness was decreased from 0.73 nm to 0.67 nm. According to XPS measurements, concentration of oxygen vacancies were decreased at $600^{\circ}C$. Optical band gap were increased to 3.31eV. The carrier concentration and Hall mobility were sharply increased at 600oC. Our results indicate that the IGZO films deposited at a room temperature can show better thin film properties through a heat treatment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.10
• /
• pp.1488-1493
• /
• 2017

Boron-doped ZnO:Al films were deposited by rf magnetron sputtering. The structural and optical property variations of the films with the boron amounts were studied. ZnO nanorods were grown on $SiO_2/Si$ wafers and glass by a hydrothermal method. ~50 nm-thick boron-doped ZnO:Al films were deposited on the substrates as seed layers. The mixed solution of zinc nitrate hexahydrate and hexamethylenetetramine in DI water was used as a precursor for ZnO nanorods. The concentration of zinc nitrate hexahydrate and that of hexamethylenetetramine were 0.05 mol, respectively. ZnO nanorods were grown at $90^{\circ}C$ for 2 hours. X-ray diffraction was conducted to observe the crystallinity of ZnO nanorods. A field emission scanning electron microscope was employed to study the morphology of nanorods. Optical transmittance was measured by a UV-Vis spectrophotometer, and photoluminescence was carried out with 266 nm light. The ZnO nanorods grown on the 0.5 wt% boron-doped ZnO seed layer showed the best crystallinity.