• 한국전기전자재료학회논문지
• /
• 제20권9호
• /
• pp.798-801
• /
• 2007

Multilayer transparent electrodes, having a much lower electrical resistance than the widely used transparent conducting oxide electrodes, were prepared by using radio frequency magnetron sputtering. The multilayer structure consisted of five layers, indium tin oxided (ITO)/zinc oxide (ZnO)/Ag/zinc oxide (ZnO)/ITO. With about 50 nm thick ITO films, the multilayer showed a high optical transmittance in the visible range of the spectrum and had color neutrality. The electrical and optical properties of ITO/ZnO/Ag/ZnO/ITO multilayer were changed mainly by Ag film properties, which were affected by the deposition process of the upper layer. Especially ZnO layer was improved to adhesion of Ag and ITO. A high quality transparent electrode, having a resistance as low as and a high optical transmittance of 91% at 550 nm, was obtained. It could satisfy the requirement for the flexible OLED and LCD.

• Transactions on Electrical and Electronic Materials
• /
• 제16권1호
• /
• pp.5-9
• /
• 2015

Optical and electrical properties were studied for Antimony doped tin oxide thin films from precursors containing 10, 30, 50, and 70 atom% of Sb deposited on bare sodalime silica, barrier layer coated sodalime silica, and pure silica glass substrates by sol-gel spinning technique. The direct band gaps were found to vary from 3.13~4.12 eV when measured in the hv range of 2.5~5.0 eV, and varied from 4.22~5.08 eV when measured in the range of 4.0~7.0 eV. Indirect band gap values were in the range of 2.35~3.11 eV. Blue shift of band gap with respect to bulk band gap and Moss-Burstein shift were observed. Physical thickness of the films decreased with the increase in % Sb. Resistivity of the films deposited on SLS substrate was in the order of $10^{-2}$ ohm cm. Sheet resistance of the films deposited on barrier layer coated soda lime silica glass substrate was found to be relatively less.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.307-308
• /
• 2008

Zinc oxide is a direct band gap wurtzite-type semiconductor with band gap energy of 3.37eV at room temperature. the n-type doped ZnO oxides, B doped ZnO (BZO) is widely studied in TCOs materials as it shows good electrical, optical, and luminescent properties. we focused on the fabrication of B doped ZnO films with glass substrate using the LSMCD at low temperature. And Novel boron-doped ZnO thin films were deposited and characterized from the structural, optical, electrical point of view. The structure, morphology, and optical properties of the films were studied as a function of by employing the XRD, SEM, Hall system and micro Raman system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.29-32
• /
• 1988

Polycrystalline CdS films were prepared by coating a slurry, which consisted of Cds, 11w/o of CdCl$_2$ and various amounts of InCl$_3$on the glass substrate and by sintering in a nitrogen atmosphere. Measurements on the electrical and optical Properties and observation on the microstructure of the sintered films were made. It was observed that the carrier concentration in the films remains almost constant on the addition of InCl$_3$. Optical transmittance remains constant on the addition of InCl$_3$ up to 3w/o but it decreases with further increase in InCl$_3$.

• 열처리공학회지
• /
• 제29권5호
• /
• pp.216-219
• /
• 2016

$SnO_2$ single layer films (100 nm thick) and 2 nm thick Ni intermediated $SnO_2$ films were deposited on glass substrate by RF and DC magnetron sputtering without intentional substrate heating and then the influence of the Ni interlayer on the electrical and optical properties of the films were investigated. As deposited $SnO_2$ single layer films show the optical transmittance of 82.6% in the visible wavelength region and a resistivity of $6.6{ \times}10^{-3}{\Omega}cm$, while $SnO_2/Ni/SnO_2$ trilayer films show a lower resistivity of $2.7{ \times}10^{-3}{\Omega}cm$ and an optical transmittance of 76.3% in this study. Based on the figure of merit, it can be concluded that the intermediate Ni thin film effectively enhances the opto-electrical performance of $SnO_2$ films for use as transparent conducting oxides in flexible display applications.

• Transactions on Electrical and Electronic Materials
• /
• 제10권5호
• /
• pp.165-168
• /
• 2009

Transparent and conducting ITO/Cu/ITO multilayered films were deposited by magnetron sputtering on unheated polycarbonate (PC) substrates. The thickness of the Cu intermediate film was varied from 5 to 20 nm. Changes in the microstructure and optoelectrical properties of ITO/Cu/ITO films were investigated with respect to the thickness of the Cu intermediated layer. The optoelectrical properties of the films were significantly influenced by the thickness of the Cu interlayer. The sandwich structure of ITO 50 nm/Cu 5 nm/ITO 45 nm films had a sheet resistance of $36{\Omega}$/Sq. and an optical transmittance of 67% (contain substrate) at a wavelength of 550 nm, while the ITO 50 nm/Cu 20 nm/ITO 30 nm films had a sheet resistance of $70{\Omega}$/Sq. and an optical transmittance of 36%. The electrical and optical properties of ITO/Cu/ITO films were determined mainly by the Cu film properties. From the figure of merit, it is concluded that the ITO/Cu/ITO films with a 5 nm Cu interlayer showed the better performance in transparent conducting electrode applications than the conventional ITO films.

• 한국재료학회지
• /
• 제23권9호
• /
• pp.517-524
• /
• 2013

The electrical and optical properties of fluorine-doped tin oxide films grown on polyethylene terephthalate film with a hardness of 3 using electron cyclotron resonance plasma with linear microwave of 2.45 GHz of high ionization energy were investigated. Fluorine-doped tin oxide films with a magnetic field of 875 Gauss and the highest resistance uniformity were obtained. In particular, the magnetic field could be controlled by varying the distribution in electron cyclotron deposition positions. The films were deposited at various gas flow rates of hydrogen and carrier gas of an organometallic source. The surface morphology, electrical resistivity, transmittance, and color in the visible range of the deposited film were examined using SEM, a four-point probe instrument, and a spectrophotometer. The electromagnetic field for electron cyclotron resonance condition was uniformly formed in at a position 16 cm from the center along the Z-axis. The plasma spatial distribution of magnetic current on the roll substrate surface in the film was considerably affected by the electron cyclotron systems. The relative resistance uniformity of electrical properties was obtained in film prepared with a magnetic field in the current range of 180~200A. SEM images showing the surface morphologies of a film deposited on PET with a width of 50 cm revealed that the grains were uniformly distributed with sizes in the range of 2~7 nm. In our experimental range, the electrical resistivity of film was able to observe from $1.0{\times}10^{-2}$ to $1.0{\times}10^{-1}{\Omega}cm$ where optical transmittance at 550 nm was 87~89 %. These properties were depended on the flow rate of the gas, hydrogen and carrier gas of the organometallic source, respectively.

• 한국전기전자재료학회논문지
• /
• 제13권10호
• /
• pp.817-821
• /
• 2000

In this work, we have investigated the dependence of annealing temperature(T$\_$a/) on optical and electrical properties of amorphous hydrogenated SiC(a-SiC:H) films. The a-SiC:H films were deposited on corning glass and p-type Si(100) wafer by PECVD (plasma enhanced vapor deposition) using SiH$_4$+CH$_4$+N$_2$ gas mixture. The experimental results have shown that the optical energy band gap(E$\_$opt/)of the thin films annealed at high temperatures have shown that the graphitization of carbon clusters and micro-crystalline silicon occurs. The current-voltage characteristics have shown good electrical properties at the annealed films.

• 한국전기전자재료학회논문지
• /
• 제22권9호
• /
• pp.792-797
• /
• 2009

In this paper, CdS thin films for the use of window layer in solar cell were fabricated by vacuum evaporation method to improve the reproducibility, The electrical and optical properties of thin films with the variations of substrates temperature and the variations of the film thickness were investigated. As increasing the substrates temperature the resistivities of films were increased. The samples transmissivity were shown over 70% when the wavelength were above 500 nm. In the films with 280 nm thickness, its transmissivity were reached 100%. The resistivities of the samples were decreased as increasing its thickness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.225-227
• /
• 1994

The second-order nonlinear optical effect, especially the second harmonic generation, in Langmuir-Blodgett(LB) films have get much attention over the past few years. For second harmonic generation(SHG) of the ultrathin organic films, the multilayer structure of the film should have the noncentrosymmetric arrangements of molecules. The Langmuir-Blodgett technique can result in the production of thin films of precisely controlled dimensions and structure. In this paper, n-octadecyl 4-(4'-nitrophenylazo)-1-naphthyl ether, ONNE(azohenzene derivative), was synthesized and the optical properties of ONNE was studied. Nonccntrosymmctric Z-type LB films of ONNE were prepared and SHG intensity of the film were measured. The structural characteristics of floating monolayer(L film) and LB film of ONNE were discussed with $\pi$-A isotherm. UV-visible absorption spectroscopy and spectroscopic ellipsometry. The polarized UV-visible absorption spectroscopy and SHO intensity suggest the molecular orientation in LB film.