• 수산해양기술연구
• /
• 제12권1호
• /
• pp.7-12
• /
• 1976

The optical properties of the sea water were studied by use of underwater photometers in the coastal waters of Busan, from December 1975 to May 1976. The absorption coefficient of the sea water in the area ranged from 0.223 to 0.901 and the mean was 0.355. Maximum valae of monthly mean was 0.454 in December, while the minium was 0.301 in January. The transparency in winter was higher than that in spring and the mean was 4. 7 meters. The relation between absorption coefficient (m) and transparency (D) was m= 1. 67/ D. The rate of light penetration at 5 m-layer in the area ranged from 1. 73 to 24.09 percent and the mean was 13.63 percent, while the rate at 10 m-layer ranged from 0.067 to 8.05 percent and the mean was 2.95 percent.

• Transactions on Electrical and Electronic Materials
• /
• 제7권5호
• /
• pp.267-270
• /
• 2006

The Indium tin oxide (ITO) films were deposited on CR39 substrate using DC magnetron sputtering. ITO thin films deposited at room temperature because CR39 substrates its glass-transition temperature of is $130^{\circ}C$. ITO thin films used bottom and top electrode and for organic thin film transparent transistor.(OTFT) ITO thin film electrodes electrical properties and optical transparency properties in the visible wavelength range (300 - 800 nm) strongly dependent on volume of oxygen percent. For the optimum resistivity and transparency of ITO thin film electrode achieved with a 75 W plasma power, 10 % volume of oxygen and a 27 nm/min deposition rate. Above 85 % transparency in the visible wavelength range (300 - 800 nm) measured without post annealing process and $9.83{times}10{-4}{\Omega}cm$ a low resistivity was measured thickness of 300 nm.

• 센서학회지
• /
• 제16권3호
• /
• pp.229-233
• /
• 2007

The indium tin oxide (ITO) films were deposited on CR39 substrate using DC magnetron sputtering. The ITO thin films deposited at room temperature because CR39 substrate its glass-transition temperature is $130^{\circ}C$. The ITO thin films used bottom and top electrode and for organic thin film transparent transistors (OTFTs). The ITO thin film electrodes electrical properties and optical transparency properties in the visible wavelength range (300-800 nm) strongly dependent on volume of oxygen percent. For the optimum resistivity and transparency of the ITO thin film electrode achieved with a 75 W plasma power, 10 % volume of oxygen and a 27 nm/min deposition rate. Above 85 % transparency in the visible wavelength range (300-800 nm) measured without post annealing process and a low resistivity value $9.83{\times}10^{-4}{\Omega}cm$ was measured thickness of 300 nm. All fabrication process of ITO thin films did not exceed $80^{\circ}C$.

• 한국재료학회지
• /
• 제17권4호
• /
• pp.232-235
• /
• 2007

Indium tin oxide (ITO) films were deposited on polycarbonate CR39 substrate using DC magnetron sputtering. ITO thin films were deposited at room temperature because glass-transition temperature of CR39 substrate is $130^{circ}C$ ITO thin films are used as bottom and top electrodes and for organic thin film transparent transistor (OTFT). The electrodes electrical properties of ITO thin films and their optical transparency properties in the visible wavelength range (300-800 nm) strongly depend on the volume of oxygen percent. The optimum resistivity and transparency of ITO thin film electrode was achieved with a 75 W plasma power, 10 % volume of oxygen and a 27 nm/min deposition rate. Above 85% transparency in the visible wavelength range (300-800 nm) was measured without post annealing process, and resistivity as low as $9.83{\times}^{TM}10^{-4}{\Omega}$ cm was measured at thickness of 300 nm.

• 한국세라믹학회지
• /
• 제54권3호
• /
• pp.184-199
• /
• 2017

Silica aerogels are attracting attention due to certain outstanding properties such as low bulk density, low thermal conductivity, high surface area, high porosity, high transparency and flexibility. Due to these extraordinary properties of aerogels, they have become a promising candidate in thermal superinsulation. The silica-based aerogels are brittle in nature, which constrains their large scale-application. It is necessary to achieve transparency and flexibility of silica-based aerogels at the same time and with the same porous structure for optical field applications. Therefore, the present review focuses on the different sol-gel synthesis parameters and precursors in the synthesis of flexible as well as transparent silica aerogels. Also, a brief overview of reported flexible and transparent aerogels with some important properties and applications is provided.

• 폴리머
• /
• 제34권5호
• /
• pp.480-484
• /
• 2010

무수산인 4,4'-(4,4'-isopropylidene-diphenoxy)bis(phthalic anhydride)(BPADA)와 아민계인 2,2'-bis(trifluoromethyl)benzidine(TFB), bis(3-aminophenyl)sulfone(APS), 4,4'-methylene-bis-(2-methylcyclohexylamine)(MMCA), bis[4-(3-aminophenoxy)phenyl]sulfone(BAPS)에 melamine을 각각 5 몰%로 반응시켜 N,N'-dimethylacetamide(DMAc) 용매 속에서 폴리아믹산(poly(amic acid), PAA)들을 얻었다. 용액 상태의 PAA를 캐스팅하여 각각 다른 반응 온도에서 열처리를 통해 무색 투명한 폴리이미드(PI) 필름을 얻었다. PI의 열적 성질, 광학적 특성을 다양한 아민 구조의 변화에 따라 조사하였으며, 열적 성질은 differential scanning calorimetry(DSC), thermogravimetric analysis(TGA), thermomechanical analysis(TMA)를 이용해 측정하였고, 광학적 투명도는 색차계(spectrophotometry)를 이용하였다. 제조된 모든 필름의 열 팽창계수는 $48.53-64.24ppm/^{\circ}C$ 사이의 값을 얻었으며, 모든 필름 시료의 노란색 지수(yellow index, YI)는 3 이하를 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.309-312
• /
• 2004

The electronic structure of ZnO oxide semiconductor having high optical transparency and good electric conductivity was theoretically investigated by $DV-X_{\alpha}$(the discrete variation $X_{\alpha}$) method, which is a sort of the first principle molecular orbital method using Hatre-Fock-Slater approximation. The electrical and optical properties of ZnO are seriously affected by the addition of impurities. The imnurities are added to ZnO in order to increase the electric conductivity of an electrode without losing optical transparency. In this study, the effect of impurities of III and IV family on the band structure, impurity levels and the density of state of ZnO were investigated. The cluster model used for calculations was $[MZn_{50}O_{53}]^{-2}$(M=elements belonging to III and IV family).

• 폴리머
• /
• 제32권3호
• /
• pp.256-262
• /
• 2008

폴리아믹산(PAA)의 열 이미드화 반응을 이용해서 4,4'-(hexafluoroisopropylidene)diphthalic anhydride(6FDA)와 bis[4-(3-aminophenoxy)phenyl]sulfone(BAFS)의 단량체에 2,2-bis[4-(4-amino-phenoxy)phenyl]hexafluoropropane(BAPP)의 다양한 몰 비에 따른 삼불소메틸($CF_3$) 곁가지를 가지는 공중합체 폴리이미드(PI)를 합성하였다. 이 공중합체 PI는 N,N'-dimethylacetamide(DMAc)와 같은 용매에 잘 녹았으며 용액 캐스팅하여 얻은 필름은 유연하고 질긴 성질을 보였다. 공중합체 PI 필름의 열적-기계적 성질, 모폴로지 및 광학 투명도들을 측정하기 위해 시차 주사 열 분석기(DSC)와 열 중량 분석기(TGA), 넓은 각 X-선 회절도(XRD), 주사 전자현미경(SEM), 만능 인장 시험기(UTM) 그리고 자외선-가시광선 흡광도기(UV-Vis. spectrometer) 등을 사용하였다. 얻은 공중합체 PI 필름은 투명하였으며, 각 필름의 cut-off wavelength(${\lambda}_0$)은 $275{\sim}319\;nm$이었고, 노란색 지수(yellow index: YI)는 $3.65{\sim}10.37$의 값을 보여주었다. 공중합체 PI 필름의 열적-기계적 성질들은 BAPP의 몰비가 증가할수록 증가하였지만, 광학적 특성에서는 반대의 결과를 보여주었다.

• 폴리머
• /
• 제30권2호
• /
• pp.158-161
• /
• 2006

본 연구에서는 고온 고압하의 반응기내에서 일차 아민(primary amine)과 PMMA의 이미드화 반응을 유도하여 내열성 플라스틱 광섬유(plastic optical fiber, POF) 재료인 polyglutarimide(PGI)를 제조하였다. 에틸 아민과 이소프로필 아민, 두 종류를 사용하였으며, 반응시 함량을 다르게 하여 합성한 후 PGI의 여러 가지 물성을 비교하였다. $^1H$ NMR과 FTIR을 사용하여 PGI의 이미드 전환율을 비교하였고, DSC와 TGA를 통해 열적 특성을 조사하였다. 에틸 아민을 사용하여 합성된 PGI 화합물들이 높은 이미드 전환율을 보이면서 향상된 내열성을 나타내었다. POF재료로서 필수적인 광학적 성질은 분광광도계와 아베굴절계로 굴절률과 광 투과율을 조사하였다. 대부분의 PGI는 PMMA 수준의 광 투과율을 유지하였으며, 보다 높은 굴절률을 나타내었다. 이것은 합성된 PGI가 POF 코어물질로써 우수한 광 효율 및 내열성 향상에 기여할 수 있음을 의미한다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1999년도 제16회 광학 및 양자전자 학술발표회Proceedings of 16th Optics and Quantum Electronics Conference, 1999
• /
• pp.220-221
• /
• 1999

Single crystals of Yttrium Calcium Oxyborate (YCOB) doped with different concentrations of Er3+ and Yb3+ ions were growth by Czochralski method. High qualities of crystals in morphology and transparency were obtained . Analysis on crystal structure and lattice parameters were performed by X-ray diffraction method. It was found that congruent melting composition is YCA4.2O1.2(BO3)3. Absorption and fluorescence properties of grown crystals were also reported.