• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.12-12
• /
• 2002

We present the new jaw tracking system that utilizes five degrees of freedom of head and lower jaw. The proposed method does not disturb the physiology because the system does not need to fix magnetic field sensors or clutch on the patient's body or mouth. The impact of this result goes beyond the conventional optical and magnetic tracking system of jaw movement [1][2]. Position accuracy within 1mm and reasonable cost is necessary for practical use of the jaw tracking system. (omitted)

• 대한전자공학회논문지
• /
• 제26권12호
• /
• pp.2032-2038
• /
• 1989

Single mode optical fiber interferometeric sensors using phase tracking homodyne detection are typically susceptible to environmentally indured temperature fluctuations and other types of disturbances. A simple and effective phase tracking feedback electronic circuit for compensator is described to achieve stabilizing signal output, maximum sensitivity and linearity in the fiber optic Mach-Zehnder infterferometer in the presence of differential phase drift. The phase tracking range of the piezoelectric cyclinder in the reference arm is \ulcorner.7 \ulcornerad and the prabe mass about 1 gram in the sensing arm was used for measurements of the gravity acceleration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.2995-2997
• /
• 1999

Recently, real-time visual tracking control for a robot manipulator is performed by using a vision feedback sensor information. In this paper, the optical flow is computed based on the eye-in-hand robot configuration. The image jacobian is employed to calculate the rotation and translation velocity of a 3D moving object. LQG visual controller generates the real-time visual trajectory. In order to improving the visual tracking performance. VSC controller is employed to control the robot manipulator. Simulation results show a better visual tracking performance than other method.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.15-22
• /
• 1996

In the soliton transmission system for a long-length and high bit rate data transmission systme using the nonlinear/dispersive optical fibers, the improtant problem is the loss characteristics and is the limited transmission rate by interaction forces. In this paper, It is explained the reasons of moved time position for the soliton peak value due to interaction force sof adjacent solitons. And for the analysis of interaction force affection level in the losslessmedia, we define the percent parameter of error rate due to the interaction forces and propose the optimum time distance of adjacent solitons by peak value tracking methods. With the results, initial percent of error is approximately 50% when itme difference between adjacent solitons is 5 times of funddametnal soliton pulse width. And it is confirmed that maximum transmission length of th esolitons is approximately 38 times of fundamental soliton period, which the maximum allowable percoent of error is 50%.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.214-219
• /
• 2003

Recently, the optical disk drive that is thin in thickness has been demanded by the popularization of notebook PC. The device that controls the thickness of a drive is the height of optical pickup. Therefore, researches about this are going on and an asymmetric actuator is the good choice fur this target. However, the actuator of this design has troubles that a subsidiary resonance is likely to be actuated by discord between the center of force and the mass of renter. In this paper, relation between the tracking coil and the subsidiary resonance is analyzed and dynamic characteristics of an actuator are improved by using experiments design and response surface method.

• Journal of the Optical Society of Korea
• /
• 제3권2호
• /
• pp.80-85
• /
• 1999

We propose and demonstrate a new scheme for suppression of output distortion in an open-loop gyroscope employing an erbium-doped fiber amplifier/source (FAS). In addition to the main modulation for the rotation rate measurement, a small auxiliary modulation at a different frequency is used to extract an error signal, which is necessary for keeping the quasi-dc component of the feedback signal power at a constant level for varying rotation rate. By active tracking of the optimum modulation condition using this two-frequency modulation scheme, we obtain stable gyro output with suppressed distortion as well as stable FAS characteristics. We also calculate the distortion in the gyro response due to the feedback effect, from which we estimate the FAS gyro output distortion due to the residual ac feedback effect when the dc feedback effect is removed by the proposed scheme. The measured residual deviation agrees reasonably with the estimation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.775-779
• /
• 2003

Recently, a new type actuator using multi-pole magnet has been developed for high-density and high-speed disk drive, which can be achieved higher sensitivity than a conventional actuator for applying one-pole magnet. However, it is very difficult for the actuator of multi-pole magnet to meet simultaneously the optimal design condition for reducing rolling mode effect and improving driving sensitivity because the force center is different from the mass center In this paper, First We propose the new shape coil for tracking which can reverse moment additionally in tracking motion, Next we achieve the optimal design to reduce phase disturbance and peak gain at the rolling mode frequency. Finally, the validity of the proposed methods is proved from experimental results.

• 한국군사과학기술학회지
• /
• 제19권3호
• /
• pp.387-394
• /
• 2016

This paper proposes a new disturbance observer(DOB). The purpose of the DOB is to realize the plant performing like a model in the presence of disturbances which come from external environment and inherent nonlinearities and uncertainties in the plant. It is shown that the proposed DOB compensates those disturbances, nonlinearities and uncertainties, effectively. And it is theoretically proved that the proposed DOB can be guaranteed its stability for the stable plant. Its availability is shown by applying the DOB to the stabilization platform for EOTS(Electro Optical Tracking System).

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2014년도 추계학술발표대회
• /
• pp.984-987
• /
• 2014

본 논문에서는 단일 카메라를 이용하여 차량의 위치를 검출하고 연속적으로 입력되는 영상에서의 차량의 움직임을 추적하는 알고리즘을 제안한다. 차량의 특징을 검출하기 위해 대표적으로 사용하는 SIFT와 SURF 알고리즘보다 성능이 좋은 Ferns 알고리즘을 사용하고 Optical Flow Tracker를 이용하여 차량의 위치를 추적한다. 신뢰도를 높이기 위해서 이전 프레임에서 학습되지 않은 특징에 대해 지속적으로 학습하여 새로운 학습결과를 도출하여 업데이트한다. 기존의 차량 검출 알고리즘보다 본 논문에서 제안하는 알고리즘이 Ferns에 의한 학습과 Optical Flow Tracking의 상호작용으로 높은 매칭률과 효율성을 보였다.

• 한국항공우주학회지
• /
• 제49권11호
• /
• pp.953-960
• /
• 2021

거창 우주물체 레이저 추적 시스템은 인공위성 레이저 추적, 적응광학, 우주쓰레기 레이저 추적 등 과학 연구 및 국가적 미션을 수행하기 위해 100cm 크기의 광학 망원경을 가지고 있으며, 빠르고 정밀한 구동을 위하여 경위대식 방식의 추적마운트를 개발하여 테스트 관측 중에 있다. 최근 레이저 추적 시스템의 자동 관측 및 응용 연구 분야에서 추적 대상을 정밀하게 추적할 수 있는 능력은 시스템 성능을 판단할 수 있는 중요한 지표 중 하나이다. 그러기 위해서는 정밀 추적을 저해하는 요인을 파악하고 보정하기 위한 지향 보정 모델이 요구된다. 따라서 본 논문에서는 추적마운트 제작, 조립 및 설치 과정에서 발생 할 수 있는 정적 지향 오차 발생 원인들을 분석하였으며, 거창 우주물체 레이저 시스템의 추적마운트에 적용된 지향 보정 모델 및 최소자승법을 통해 추적마운트 파라미터를 추정하고, 지향 정밀도 분석 결과를 제시하였다.