• Journal of Magnetics
• /
• v.14 no.1
• /
• pp.15-17
• /
• 2009

The magnetostatic interaction between the two magnetic nanowires was studied by using the longitudinal magneto-optical Kerr effect (MOKE). For this purpose two magnetic nanowires having different widths (400 nm, 800 nm) were fabricated on an Si substrate with electron beam lithography and the lift-off method. Magnetic hysteresis loops measured by MOKE showed double switching behavior, corresponding to the separated switching fields of each wire. The switching field of the narrow wire was greatly affected by the separation between the two wires. Based on how the switching field changes with decreasing separation, it is concluded that the magnetostatic field of the 800-nm wire strongly affects the switching of the 400-nm wire when the separation is less than $0.5{\mu}m$.

• Convergence Security Journal
• /
• v.12 no.1
• /
• pp.35-42
• /
• 2012

Increase of data traffic and the advent of new real-time services require to change from the traditional TDM-based (Time Division Multiplexing) networks to the optical networks that soft and dynamic configuration. Voice and lease line services are main service area of the traditional TDM-based networks. This optical network became main infrastructure that offer many channel that can convey data, video, and voice. To provide high resilience against failures, Packet-optical networks must have an ability to maintain an acceptable level of service during network failures. Fast and resource optimized lightpath restoration strategies are urgent requirements for the near future Packet-optical networks with a Generalized Multi-Protocol Label Switching(GMPLS) control plane. The goal of this paper is to provide packet-optical network with a hierarchical multi-layer recovery in order to fast and coordinated restoration in packet-optical network/GMPLS, focusing on new implementation information. The proposed schemes do not need an extension of optical network signaling (routing) protocols for support.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.8
• /
• pp.12-20
• /
• 1998

All-optical networks(AON) are emerging as the next generation broadband networks for wide-area and local-area networks. Many optical switch architectures are currently proposed to realize AON. Specially, optical switches using WDM have a lot of advantages in point of the optical transparency and network topology for B-ISDN services in AON. In this paper, two kinds of Knockout Optical Switching Architectures(KOSA) are proposed for high speed optical ATM networks. We use WDM technologies for them to operate in all-optical area and they are called Architecture-Ⅰ, Architecture-Ⅱ respectively. Each one represents different characteristics according to the number of components and the kind of components, which make KOSA have different performance and system complextity. In order to verify and to compare the performance, these architectures were analyzed and simulated in terms of cell loss ratio, system complexity and buffering speed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5140-5147
• /
• 2013

This paper presents a new idea of structural design of the optical access network for IPOW(IP over WDM) services. More efficient network can be constructed, because the IP packets are transmitted directly to the WDM without going through an intermediate layer of networks. The wavelength Routing is based on a label switching technology. The ability to transmission of high volume traffics and QoS capability of the optical label switching directly to the end user of the IPOW optical internet networks is provided. As in AON(Active Optical Network) flexible bandwidth on demand subscribers is allocated. By the Simulation of the proposed optical access networks to measure the BER(Bits Error Ratio) at the end of the nodes the network characteristics are analyzed. These results are based on the design of efficient optical network.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.8
• /
• pp.1-11
• /
• 2002

A multi-section DFB-LD shows optical bistability subject to externally injected light signal, then it has potential applications such as wavelength conversion and optical logic gates. In this paper, we have studied the optical bistability in multi-section DFB-LD using split-step time-domain model. It is confirmed that the multi-section DFB-LD, which is excited inhomogeneously, shows bistability. The optical bistable characteristics are investigated when input light is injected into a absorptive region. Simulation results show that multi-section DFB-LD works as a flip-flop depending on the set-reset optical pulse which has a few ns in switching time and a few pj in switching energy, so that it can act as a optical logic device. Besides, if we change the carrier lifetime and the differential gain coefficient, it is expected that the response time of optical output signal can be reduced.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.326-327
• /
• 2005

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.142-143
• /
• 2005

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.276.1-277
• /
• 2000

Absorptive bistable laser diode was analyzed by using traveling wave model in conjunction with the finite-difference method. Carrier and photon density distributions were calculated and the output characteristics were obtained. The results for both the steady-state and transient (switching) cases were compared with those of the rate equation approach.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.141-142
• /
• 2009

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.276-277
• /
• 2009