• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.95-98
• /
• 2006

LCD-BLU (Back Light Unit) is one of kernel parts of LCD unit. The fabrication method of a 3-D micro mold patterned with micro-lenses for the LGP (Light Guiding Plate), one of the most important parts of LCD-BLU, was presented. Instead of dot pattern made by etching, 3-D optical pattern design with $50{\mu}m$ micro-lens was applied in the present study. The micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The positive micro-lens patterned injection mold with different aspect ratios (i.e. 0.3 and 0.4) was fabricated with modified LiGA with thermal reflow process. The brightness of LCD-BLU increased as aspect ratio of micro-lens increased.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.398-407
• /
• 2013

Optical tomography was used to measure the pattern of spray cross-section. The maximum-likelihood estimation (MLE) algorithm was used to reconstruct the spray cross-section from the measured transmission rate of the spray. A swirl-type injector was used to form an optically dense spray, and the test was carried out in a high-pressure chamber, to control the pressure condition of the test site. Before the experiment, the reliability of the MLE-based reconstruction algorithm was verified, by comparing it with a conventional filtered back projection reconstruction (FBP) method. The MLE algorithm showed superior reconstruction of the image. In the spray patternation experiment, the results of the optical tomography and optical line patternator, which uses Mie scattering signal information, were compared. While measuring the cross-section of optically dense spray, the intensity of the scattering signal had attenuated to an uncorrectable level, which led to incorrect spray pattern measurement by the optical line patternator. However, reliable results were obtained by optical tomography, under the same condition. Finally, the pattern of the optically dense spray was measured at various chamber pressures, of up to 3 MPa. As the chamber pressure increased, the hollow cone-shaped swirl spray shrank, and the attenuation coefficient value of the inner region increased.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1996년도 Advance Program of 13th optics andquantum Electronics conference, 1996제13 회 광학 및 양자전자 학술 발표회 논문 요약집
• /
• pp.21-21
• /
• 1996

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.148-149
• /
• 2002

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.239-242
• /
• 2006

LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of kernel parts of LCD unit and it consists of several optical sheets(such as prism, diffuser and protector sheets), LGP (Light Guiding Plate), light source (CCFL or LED) and mold frame. The LGP of LCD-BLU is usually manufactured by forming numerous dots with $50{\sim}200$ um in diameter on it by etching process. But the surface of the etched dots of LGP is very rough due to the characteristics of the etching process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current etched dot patterned LGP, optical pattern design with 50um micro-lens was applied in the present study. The micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The attention was paid to the effects of different aspect ratio (i.e. $0.2{\sim}0.5$) of optical pattern conditions to the brightness distribution of BLU with micro-lens patterned LGP. Finally, high aspect ratio micro-lens patterned LGP showed superior results to the one made by low aspect ratio in average luminance.

• 정보보호학회논문지
• /
• 제9권4호
• /
• pp.37-48
• /
• 1999

현대암호방식은 종래의 선형 대수와 수리이론을 적용한 암호통신을 벗어난 유사 잡음성을 띠는 카오스 신호를 이용한 암호통신을 적용해 오고 있다,[1-2] 본 논문은 1차 permutation 알고 리즘을 이용 하여 변환된 정보를 2차 이산 카오스 변환 함수를 이용해 암호화하는 광영상 암호시스템을 제안하여UT 다. 제안된 시스템은 키수열 발생기의 출력을 통해 영상정보를 permutation 하는 알고리즘 을 설계하였고 이에 대한 검정을 수행하였다. 또한 본 논문에서는 permutation 알고리즘을 통해 제한적인 카오스 함수 의 적용시 발생하는 문제점을 해결하고 비도를 증가시킴으로써 광영상 암호시스템에 적용 시 그 타당성 을 검정하였다. Current encryption methods have been applied to secure communication using discrete chaotic system whose output is a noise-like signal which differs from the conventional encryption methods that employ algebra and number theory[1-2] We propose an optical encryption method that transforms the primary pattern into the image pattern of discrete chaotic function first a primary pattern is encoded using permutation algorithm, In the proposed system we suggest the permutation algorithm using the output of key steam generator and its security level is analyzed. In this paper we worked out problem of the application about few discrete chaos function through a permutation algorithm and enhanced the security level. Experimental results with image signal demonstrate the proper of the implemented optical encryption system.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.241-244
• /
• 2004

Microlens patterned micro-mold fabrication method for Light Guiding Plate(LGP), kernel part of LCD-BLU(Back Light Unit), was presented. Instead of erosion dot pattern for LCP optical design, microlens pattern, fabricated by LIGA-reflow process, was applied. Optical pattern design method was also developed not only for negative pattern LGP, but also positive pattern LGP. In order to achieve flow balance during the micro-injection molding process and dimensional accuracy, two LGP pattern was made in one micro-mold.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.280-283
• /
• 2004

Micro-lens patterned micro-mold fabrication method for Light Guiding Plate(LGP), kernel part of LCD-BLU(Back Light Unit), was presented. Instead of erosion dot pattern for LGP optical design, micro-lens pattern, fabricated by LIGA-reflow process, was applied. Optical pattern design method was also developed not only for negative pattern LGP, but also positive pattern LGP. During injection molding process, experimental study was conducted to improve replication quality and brightness of ${\sim}50um$ micro-lens pattern mold. The effect of mold temperature for the replication quality of micro-lens array was studied.

• 한국광학회지
• /
• 제8권3호
• /
• pp.241-244
• /
• 1997

체적 홀로그램을 저장하고 재생하는데 있어서 광섬유에서 유도되는 스페클 패턴을 이용하는 것을 제안하고, 이를 이론 및 실험적으로 연구하였다. 기준빔으로 광섬유에서 회절되는 스페클 패턴을 이용한 홀로그램 위치 다중화 구조는, 스페클 패턴의 상대적 위치 차이에 따라 상관 관계가 없어지는 특징을 이용하기 때문에 좋은 횡방향 위치 선택도를 가지게 하며 축방향 움직임에 대해서는 둔감한 안정성을 보여준다. 따라서 이러한 구조를 광 정보 저장 장치에 적용하면 저장 밀도를 높일 수 있으며 홀로그램 재생시의 안정도를 증가시킬 수 있다.

• Journal of the Optical Society of Korea
• /
• 제15권4호
• /
• pp.335-339
• /
• 2011

Recently, we reported a single input channel joint transform correlator for the color pattern recognition which decomposes the input color image into three R, G, and B gray components and adds those components into a single gray image in the input plane. This technique has the merit of a single input channel instead of three input channels. However, we found this technique has some problems with discrimination impossibility in the case of a simple primary color pattern which results in the same gray level through the addition process. Thus, we propose a modified coding technique which selectively recombines the decomposed three R, G, and B gray components instead of the simple adding process. Simulated results show that the modified coding technique can accurately discriminate a variety of kinds of color images.