• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권5호
• /
• pp.205-215
• /
• 2006

In this paper an optical power meter using Hadamard transform, which can be used in multiple channel optical elements alignment system, is proposed. A traditional optical power meter in multiple channel optical elements alignment system is able to judge how well the elements are aligned each other by measuring optical power of the first and the last two channels with at least two detectors. It has critical drawback that the alignment accuracy per channel is dependent on the number of detectors. The proposed optical power meter can get noise reduction by the Hadamard transform based multiplexing technique. The Hadamard transform based multiplexing technique using spatial light modulators is distinguished by the best enhancement of signal-to-noise ratio (SNR) for the reconstructed signals. Moreover, the noise reduction increases with increasing the order of multiplexing, namely the number of optical element channels. The proposed system is implemented by PDLC (Polymer Dispersed Liquid Crystal) mask which is operated by electric filed and generates optimal multiplexing patterns based on the Hadamard transform and single detector. It means that we obtain not only the each channel's optical power of multiple channel elements at once but also the best enhancement of SNR with single detector. Experimental results show that the proposed optical power meter is suitable for an active optical alignment system for multiple channel optical elements.

• 정보처리학회논문지C
• /
• 제13C권2호
• /
• pp.161-166
• /
• 2006

무선통신에 널리 사용되는 PN(Pseudorandom Noise) 부호를 사용하여 생성 부호 수를 증가시키고 양극성 상관 수신기에서 가입자간 간섭잡음을 완전히 제거할 수 있는 2D 광 CDMA 방식을 사용한 광 가입자 망을 제안한다. 제안 시스템에서 특성을 수치적으로 분석한 결과 EIN(Excess Intensity Noise) 잡음이 지배적인 잡음전력인 것을 알 수 있다. 그리고 제안한 2D 광 CDMA 시스템에서 동시 사용 가능한 가입자의 수가 동일 성능조건하에 종래의 ID 광 CDMA 시스템보다 4배 향상된 것을 알 수 있다.

• 전자공학회논문지D
• /
• 제35D권3호
• /
• pp.91-97
• /
• 1998

In a LiNbO$_{3}$ crystal, optical noise is caused by the inhomogeneity of crystal inside if the excess energy is incident on the crystal. In this paper, we experiemnt the influence of optical noise when it is applied for beam diffraction and optical information storage. And it is proposed the energy threshold level which is not affected by optical noise in Fe-LiNbO$_{3}$ crystal(0.02Wt.% doped, 10mm*10mm*10mm). The optical noise of crystal weremeasured as a function of the incident beam intensity(10mw, 5mw, 1mw, 0.5mw), direction in incident(orthogonal, left rotation, right rotation) and wavelength(514.5nm, 632.8nm).

• 대한전자공학회논문지SD
• /
• 제48권8호
• /
• pp.5-9
• /
• 2011

Hadamard code를 이용한 spectral-amplitude-coding optical code-division multiple-access(OCDMA) 시스템은 $2^n$개의 code length만을 갖는 특성을 지니어 최대 사용자 수의 조절이 어렵고 phase-induced intensity noise(PIIN)가 커서 효율적인 시스템 구성이 어렵다. 이의 한계성을 극복할 수 있는 modified Hadamard codes를 제안하고 잡음 분석을 통하여 향상된 시스템 특성을 보인다.

• 센서학회지
• /
• 제21권6호
• /
• pp.429-433
• /
• 2012

In this paper, we reduced the optical noise interference in a visible light communication system using two color LEDs. In the transmitter, the original and the inverted signals of the transmitted data modulated a red LED and a blue LED, respectively. In the receiver, a differential detector which is composed of two photodetectors and an optical red filter detected the mixed signal radiated from the two LEDs. In an environment that the optical noise from a fluorescent lamp exists, the signal-to-noise ratio in this system was improved by about 20dB compared to that in the conventional system which uses a single LED and a single photodetector.

• 한국전자파학회논문지
• /
• 제13권6호
• /
• pp.599-604
• /
• 2002

본 논문에서는 편광기를 부착한 차동검출기의 부하저항으로 디지털가변저항을 사용하여 잡음소거 능력을 개선하였다. 이 구조에서는 차동검출기를 구성하는 2개의 포토다이오드에서 검출된 잡음전압의 크기가 항상 동일한 값이 되도록 디지털 가변저항의 크기를 제어하여 잡음광을 소거한다. 이 방식에서는 고정된 부하저항을 사용한 구조에 비하여 신호대잡음비가 약 23 dB 더 향상되었다.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.63-68
• /
• 2015

PURPOSES : A study on the efforts to minimize the road traffic noise has been underway. An attempt has been made to measure the noise level using a noise map; however, the attempt is limited to certain areas only. In general, a noise barrier is employed to prevent road traffic noise; however, unplanned noise barriers developed without considering the surrounding environment, including excessively high walls, cause problems such as infringement on prospect right. Noise ceiling at daytime in Korea is 68 dB(A), which is relatively higher than in other countries. METHODS: The noise barrier used mainly for road noise reduction was analyzed to estimate the optimal height. Related variables such as road width, the height of the upper part, distance to the building, and angle (for instance, $30^{\circ}$). RESULTS : A formula to calculate the optical height of the noise barrier, considering the road environment (i.e., parameters such as road width and distance to building), was developed in this study in an attempt to mitigate the noise generated from the road. CONCLUSIONS : The formula to calculate the noise barrier is expected to lead to cost saving, accurate installation of barriers, and protection of the right of prospect.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1998년도 제15회 광학 및 양자전자 학술발표회 논문집
• /
• pp.210-211
• /
• 1998

• 대한전자공학회논문지SD
• /
• 제48권4호
• /
• pp.1-5
• /
• 2011

변형된 modified double weight code를 사용하여 효율적인 spectral-amplitude-coding optical CDMA를 구현하였다. 수신단의 optical decoder 앞에 fiber Bragg grating(FBG)을 사용하여 이 시스템의 주된 잡음인 phase-induced intensity noise(PIIN)를 대폭 줄여 향상된 시스템의 특성을 보일 수 있었다.

• Advances in nano research
• /
• 제5권1호
• /
• pp.13-25
• /
• 2017

We examine the total optical dielectric function (TODF) of impurity doped GaAs quantum dot (QD) from the viewpoint of anisotropy, position-dependent effective mass (PDEM) and position dependent dielectric screening function (PDDSF), both in presence and absence of noise. The dopant impurity potential is Gaussian in nature and noise employed is Gaussian white noise that has been applied to the doped system via two different modes; additive and multiplicative. A change from fixed effective mass and fixed dielectric constant to those which depend on the dopant coordinate manifestly affects TODF. Presence of noise and also its mode of application bring about more rich subtlety in the observed TODF profiles. The findings indicate promising scope of harnessing the TODF of doped QD systems through expedient control of site of dopant incorporation and application of noise in desired mode.