• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.179-180
• /
• 2008

In this paper, we studied the optical property of transparent glasses for photovoltaic module manufacturing. The glass should have high mechanical and chemical resistance from outside environmental. Also optical transparency is a key requirement for better electrical performance. In here, we examine several kinds of transparent glasses and special purpose ones. This would give some real information for understanding PV module. The further analysis is described in the following paper.

• International Journal of Automotive Technology
• /
• v.8 no.2
• /
• pp.149-154
• /
• 2007

The engine behavior in a transient condition is important to not only emission regulations but also fuel economy. A fast response gas analyzer can be a useful tool to investigate exhaust gas in a transient operation. It should be designed to analyze gas concentration with a short time constant by a fast sampling module and an appropriate measuring method for each emission element. In this study, a new fast sampling module is introduced and flow analysis is performed by numerical simulation. The analysis has shown the proper operating condition and the sensitivity of the module for practical application. Calculated flow to the sampling module has $0.5{\sim}4%$ error, while backflow toward the expansion tube is expected when pressure in CP (Constant Pressure) chamber is over 0.6 bar. For a stable supply of flow to the optical cell, sample gas pressure should be in the range, $0.35{\sim}1.90$ bar, when the pressure in the CP camber and the optical cell are 0.2 bar and 0.158 bar, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.5 s.182
• /
• pp.103-110
• /
• 2006

Automatic optical alignment modules are a key technology in optical communication system. However, the optic component assembly depends highly on manual or semi-automated alignment process. In this paper, a novel alignment mechanism with minimum degree-of-freedom has been designed and theoretical models are derived from geometric optical characteristics on collimators, optical filters and optical ray alignment. The automatic alignment control algorithm has been newly developed based on the mechanism and models, and then we make fast, precise and reliable alignment through the algorithm. The reliability of developed modules has been verified with various simulations and performance evaluations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.311-320
• /
• 2001

Since 1998 for protection of marine pollution, all ships must have oil filtering equipment and 15ppm bilge alarms which satisfy Requirements of MARPOL 73/78. Oily-water separator used in machinery area of ships usually consists of two parts; one is filtering equipment and the other is oil content meter(OCM). This study presents optical characteristics of bilge were acquired form oil content sensing module. The oil content sensing module consists of IR-LED light source, photo-diode light receivers, and a glass tube for bilge water sample. The experiment with the bilge water demonstrates various valuable optical properties. These optical properties suggest notes and guides to make the low-cost, easy operation and good performance commercial type OCM that satisfy the requirements of MARPOL 73/78.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.239-242
• /
• 2003

Optical module package is a hermetic metal-ceramic package for carrying optical IC. In case of LD(laser diode) module, window is used for both the path of optical signal and hermetic sealing of package. So, window has the metallization pattern on the surface for brazing process with package wall. In this study, several method were investigated for metallization. Thin film, thick film and mixed method were used for fabrication of metallization pattern. After brazing process, hermeticity and adhesion strength were tested for characterization of metallization pattern.

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.304-309
• /
• 2009

We tested the feasibility of measuring fat thickness using a miniaturized chip LED sensor module, testing 12 healthy female subjects. The module consisted of a single detector and four sources at four different source-detector distances (SD). A segmental curve-fitting procedure was applied, using an empirical algorithm obtained by Monte-Carlo simulation, and fat thicknesses were estimated. These thicknesses were compared to computed-tomography (CT) results; the correlation coefficient between CT and optical measurements was 0.932 for bicep sites. The mean percentage error between the two measurements was 13.12%. We conclude that fat thickness can be efficiently measured using the simple sensor module.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.56.2-56.2
• /
• 2018

Ronchi test is an optical test to check the quality of an imaging system. Wavefront of the optical system can be obtained from the Ronchi patterns. In this poster, we present the Ronchi test module and the optical quality evaluation results. The test module consists of a light source, a pinhole, a beam splitter, a Ronchi ruling and a flat mirror. The test module can be simply adapted to any optical systems. We compare measured surface data for both aluminum and glass parabolic mirrors by analyzing the Ronchi patterns.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.5
• /
• pp.8-13
• /
• 2008

In this study, we analyze the electrical optical characteristics of transparent glass for photovoltaic and glass-glass module application. The elemental facts from raw glass to laminated glass with solar cells are analyzed using UV spectrophotometer and spectroradiometer. From the data of transmittance and reflectance, the optimum PV module processing condition and selection of material for fabrication should be considered deeply for obtaining high module efficiency. Also we introduce two glasses which has 2%$\sim$4% higher transmittance using coating technology with anti-reflection material. From this experiment, we try to give some basic information for PV module manufacturing industry. The detail description is specified as the following paper.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.289-290
• /
• 2007

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.12.2-12.2
• /
• 2005