• 한국인터넷방송통신학회논문지
• /
• 제12권1호
• /
• pp.165-172
• /
• 2012

$1.3{\mu}m$ 파장에서 동작하는 비대칭 Mach-Zehnder 간섭기에 분할전극 구조를 배열하여 전계 측정시스템의 감지부를 설계, 제작하였다. BPM 전산모사를 통해서 소자를 설계하였고, $LiNbO_3$에 Ti 확산방법으로 구현된 채널 광도파로에 집중 전극구조를 배열하여 집적광학 칩을 제작하였다. ${\pi}/2$ 위상차를 갖도록 설계된 비대칭 구조에서는 DC 0V에서 측정된 출력 광세기가 최고치에 약 1//2에 해당됨을 확인하였으며, 1KHz 전기신호를 인가해서 ${\pi}/2$ 위상차 때문에 나타나는 전기적 현상들을 확인하였다.

• 디지털융복합연구
• /
• 제13권1호
• /
• pp.269-274
• /
• 2015

IT 산업의 발달로 AOI 장비의 보급이 확산되고 있으며, 장비의 사용되는 카메라의 높은 해상도를 요구하고 있다. 높은 해상도를 얻기 위해 카메라의 중량이 증가되고 있으며, 그로 인해 진동변위가 커지게 되어 촬상에 문제가 생기고 제어 또한 어려워지고 있다. 본 연구에서는 유한요소 해석프로그램인 NX/NASTRAN을 이용하여 카메라가 관성에 의한 충격력을 받을 때의 과도응답분석을 해 보았다. 또한 Laser Interferometer 측정 결과와의 상관관계 분석을 통하여 향후 AOI의 구조 개선 시, 유한요소해석으로 설계의 신뢰성을 검증할 수 있도록 하기 위한 해석모델을 개발하였다.

• 한국광학회지
• /
• 제11권5호
• /
• pp.306-311
• /
• 2000

본 논문에서는 초음파영역에서 진동하는 물체의 진동주파수와 크기를 측정할 수 있는 레이저 도플러 진동계(Laser Doppler Vibrometer, 이하 LDV)를 설계, 제작하였다. LDV의 광원으로는 파장이 632.8 nm인 He-Ne 레이저를 사용하였으며 Bragg셀에 의해 주파수가 천이되도록 한 마이켈슨형 간섭게 (Michelson interferometer)로 구성하였다. PIN다이오드의 출력은 중심주파수가 40 MHz인 주파수 변조된 신호이며, 이 신호를 증폭하고 주파수를 2.5MHz로 낮춘 후 디지털로 변환하였다. Digital Phase Locked Loop(이하 DPLL)를 사용하여 진동하는 표면의 속도에 비례하는 전압출력을 얻었으며, 이 신호로부터 진동주파수와 크기를 추출하고 주파수특성을 보상하기 위하여 마이크로프로세서를 사용하였다. 그 결과 300 kHz까지의 진동을 측정할 수 있었으며 300 kHz로 진동하는 경우 측정 가능한 최소진폭은 1 nm이었다. 본 연구에서 개발된 LDV는 대용량 전기기기의 부분방전에 의해 발생되는 초음파진동으로부터 최소형 전기 기기의 미세진동까지 측정하는 비접촉식 진동 측정에 사용할 수 있다고 사료된다.

• 한국광학회지
• /
• 제22권6호
• /
• pp.276-282
• /
• 2011

펨토초 펄스형 자발적 매개하향변환에서 생성된 1.5 ${\mu}m$ 통신파장대역 광자쌍의 진동수 얽힘상태를 구현하고, 광섬유 기반 Hong-Ou-Mandel 간섭계를 이용하여 양자간섭 실험을 수행하였다. 각진동수 ${\omega}_1$과 ${\omega}_2$에 대응하는 두 광자의 파장은 저밀도 파장분할다중화(coarse wavelength division multiplexing, CWDM) 필터를 이용하여 선택하였고, 간섭계에서 경로차에 따른 두 검출기의 동시계수 측정에서 높은 선명도를 갖는 공간적인 맥놀이 형태의 간섭무늬를 관측하였다.

• 한국정밀공학회지
• /
• 제21권11호
• /
• pp.75-82
• /
• 2004

A metrological atomic force microscope (M-AFM) was developed fur the length measurements of nanometer range, through the modification of a commercial AFM. To eliminate nonlinearity and crosstalk of the PZT tube scanner of the commercial AFM, a two-axis flexure hinge scanner employing built-in capacitive sensors is used for X-Y motion instead of PZT tube scanner. Then two-dimensional displacement of the scanner is measured using two-axis heterodyne laser interferometer to ensure the meter-traceability. Through the measurements of several specimens, we could verify the elimination of nonlinearity and crosstalk. The uncertainty of length measurements was estimated according to the Guide to the Expression of Uncertainty in Measurement. Among several sources of uncertainty, the primary one is the drift of laser interferometer output, which occurs mainly from the variation of refractive index of air and the thermal stability. The Abbe error, which is proportional to the measured length, is another primary uncertainty source coming from the parasitic motion of the scanner. The expanded uncertainty (k =2) of length measurements using the M-AFM is √(4.26)$^2$+(2.84${\times}$10$^{-4}$ ${\times}$L)$^2$(nm), where f is the measured length in nm. We also measured the pitch of one-dimensional grating and compared the results with those obtained by optical diffractometry. The relative difference between these results is less than 0.01 %.

• Korean Journal of Ophthalmology
• /
• 제32권6호
• /
• pp.445-450
• /
• 2018

Purpose: To compare the tear film lipid layer thickness (LLT) between patients with incomplete nasolacrimal duct obstruction (NLDO) and normal controls and to analyze the changes in tear film LLT and blinking pattern after silicone tube intubation in NLDO patients. Methods: We reviewed the medical records of 68 eyes in 52 incomplete NLDO patients who underwent silicone tube intubation from January 2017 to July 2017. The LLT, blinking pattern, and Meibomian gland image were measured with the LipiView II ocular surface interferometer. The Meibomian gland drop-out ratio was measured using the polygon selection tool in the Image J program. Tear meniscus height, which is the other lacrimal indicator, was assessed with spectral-domain optical coherence tomography. Results: Tear meniscus height was significantly decreased after silicone tube intubation (p < 0.01). Preoperative minimum, maximum, and average LLT values were $62.4{\pm}24.0$, $86.7{\pm}17.9$, and $71.7{\pm}23.3nm$, respectively. Significant changes in the minimum, maximum, and average LLT ($74.8{\pm}23.6$, $98.8{\pm}11.0$, and $91.6{\pm}16.1nm$, respectively) were observed after silicone tube intubation (p < 0.001, p = 0.001, and p < 0.001). The partial blinking/total blinking ratio in 20 seconds and the Meibomian gland drop-out ratio showed no significant change after silicone tube intubation. Conclusions: Overall, the LLT was increased after silicone tube intubation. Silicone tube intubation may be helpful in maintaining LLT with a normalized of amount of tears.

• Tribology and Lubricants
• /
• 제20권5호
• /
• pp.225-230
• /
• 2004

Most studies of elsatohydrodynamic lubrication are oriented only to the measurement of film thickness itself with optical interferometer. In order to exactly investigate the tribological characteristics of a certain lubricant, it is also important to get the information of traction behaviors as well. In this work, we developed a device for measuring the friction force of ehl contact condition as well as the film thickness. To verify the validity of the measuring system, the friction forces and film thicknesses under ehl condition are simultaneously measured with the variations of additive ratios of viscosity index improvers which cause non-linear tendencies of film thickness to contact velocity.

• 한국광학회지
• /
• 제14권4호
• /
• pp.365-368
• /
• 2003

본 논문에서는 장주기 광섬유격자쌍을 이용하여 광섬유 Mach-Zehnder 간섭계(MZI)를 기계적인 방법으로 구현해 보았다. 제작한 간섭계의 장주기 광섬유격자쌍의 투과스펙트럼과 fringe spacing의 이론치과 실험치를 비교, 분석해 보았다. 그 결과, fringe spacing의 값은 이론치와 실험치가 비교적 잘 일치하는 것을 알았다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.184-189
• /
• 2000

Two types of fiber-optic sensors, EFPI(extrinsic Fabry-Perot interferometer) and FBG(fiber Bragg grating), have been investigated for measurement of thermal strain and temperature. The EFPI sensor is only for measurement of thermal strain and the FBG sensor is for simultaneous measurement of thermal strain and temperature. FBG temperature sensor was developed to measure strain-independent temperature. This sensor configuration consists of a single-fiber Bragg grating and capillary tube which makes it isolated from external strain. This sensor can then be used to compensate for the temperature cross sensitivity of a FBG strain sensor. These sensors are demonstrated by embedding them into a graphite/epoxy composite plate and by attaching them on aluminum rod and unsymmetric graphitelepoxy composite plate. All the tests were conducted in a thermal chamber with the temperature range $20-100^{\circ}C$. Results of strain measurements by fiber-optic sensors are compared with that from conventional resistive foil gauge attached on the surface.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.135-138
• /
• 2002

Experimental studies on vibration control of a composite beam with a piezoelectric actuator and an extrinsic Fabry-Perot interferometer (EFPI) have been performed using a neural network controller and an LQG controller. Vibration control performance was investigated in the nonlinear sensing range according to the vibration amplitudes. Using a neuro-controller, adaptive vibration control experiment has been performed for the structure with frequency variations, and its performance is compared with that of an LQG controller. The vibration control results show that the neuro-controller has good performance and robustness with respect to the system parameter variations.