• 한국광학회지
• /
• 제14권3호
• /
• pp.306-311
• /
• 2003

본 논문에서는 광전송시스템에서 파장분할다중화 광소자로 사용되는 박막필터형 광소자의 특성 분석 및 평가를 위해 입력광원을 모델링 하였으며 광경로에 대해 광선추적법을 사용하여 전산모의 한 광특성을 실험과 비교, 분석하였다. 그 결과 입력광원에 대한 cell 방식의 모델링이 결합효율의 정확도 및 가우시안 강도분포에 접근성을 볼 때 마이크로 옵틱스형 광소자 분석함에 있어 적합함을 알 수 있다. 박막필터형 광소자에 대한 최적 전산모의 결과 광섬유와 GRIN 렌즈 사이 거리가 0.24mm이며 GRIN 렌즈와 박막필터 사이 거리가 0.25mm일 때 최대 결합효율은 -0.11 ㏈이었으며 동일한 조건에의 실험결과 -0.35 ㏈의 최대 결합효율을 얻었다. 이것은 단심 및 이심페룰, GRIN 렌즈 등과 같은 구성품의 불완전성과 박막필터에 의한 손실을 고려할 때, 전산모의 결과와 매우 일치하는 것으로서 본 연구에서 제안한 입력광원의 모델링을 적용한 전산모의가 박막필터형 광소자의 특성을 예측할 수 있음을 보였다.

• 센서학회지
• /
• 제20권4호
• /
• pp.230-233
• /
• 2011

In this paper, highly-efficient optical gating in a junction device based on vanadium dioxide($VO_2$) thin film grown by a sol-gel method was investigated as a gate terminal of a three-terminal device using infrared light with a wavelength of ~1554.6 nm. Due to the photoinduced phase transition, the threshold voltage of the $VO_2$ junction device, at which the device current abruptly jumps, could be tuned with a sensitivity of ~96.5 V/W by adjusting the optical power of the infrared light directly illuminating the device. Compared with the tuning efficiency of the previous device fabricated using $VO_2$ thin film deposited by a pulsed laser deposition method, the threshold voltage of this device could be tuned by ~76.8 % at an illumination power of ~39.8 mW resulting in a tuning efficiency of ~1.930 %/mW, which is ~4.9 times larger than the previous device.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.173-177
• /
• 2008

We have developed the transparent passivation layer for top emission organic light emitting diodes using CsCl thin film by the thermal evaporation method. The CsCl film was deposited on the Ca/Ag semitransparent cathode. The optical transmittance of Ca/ Ag/CsCl triple layer is higher than that of Ca/Ag double layer in the visible range. The device with a structure of glass/Ni/2-TNATA/a-NPD/Alq3:C545T/BCP/Alq3/Ca/Ag/CsCl results in higher efficiency than the device without CsCl passivation layer. The device without CsCl thin film shows a current efficiency of 7 cd/A, whereas the device passivated with CsCl layer shows an efficiency of 10 cd/A. This increase of efficiency isresulted from the increased optical extraction by the CsCl passivation layer.

• 마이크로전자및패키징학회지
• /
• 제19권4호
• /
• pp.13-18
• /
• 2012

By the need for high-speed data transmission in PCB, the studies on the optical PCB has been conducted with optical interconnection and its packaging technology. Particularly, the polymer-based optical interconnection has been extensively studied with the advantages such as cost-effective and ease of process. For high-efficiency and passive alignment, the studies were performed using the 45 degree mirrors, MT connector, and etc. In this work, integrated PLC device and fiber alignment array block was fabricated by using imprint technology to solve the alignment and array problem of optical device and the optical fiber. The fabricated integrated block for optical interconnection of PLC device has achieved higher precision of decreasing the dimensional error of the patterns by optimization of process and its insertion loss has an average value of 4.03dB, lower than criteria specified by international standard. In addition, a optical waveguide with built-in lens has been proposed for high-efficiency and passive alignment. By simulation, it was confirmed that the proposed structure has higher coupling efficiency than conventional no-lens structure and has the broad tolerance for the spatial offset of optical waveguide.

• International Journal of Contents
• /
• 제2권3호
• /
• pp.6-10
• /
• 2006

Small molecule OLED devices were fabricated and the electro-optical characteristics were analyzed. The luminance and color coordinate of the fabricated OLED device were $24,390cd/m^2$ and (x=0.15, y=0.22), respectively. Current efficiency of 6.8 cd/A and power efficiency of 2.4 lm/W were also obtained under DC operating condition. Transient light intensity was also measured by using Si photodiode.

• 한국광학회지
• /
• 제34권6호
• /
• pp.235-240
• /
• 2023

종단방출형 광위상배열장치에 주입된 광신호는 장치 내부의 도파로를 따라서 전파되어 안테나 끝단에서 외부로 방출되는데 이 경계면에서 반사와 산란이 발생하여 광신호의 방출효율이 감소하게 된다. 본 연구에서는 이 방출효율을 증가시키기 위하여 끝단으로 갈수록 폭이 가늘어지는 도파관 안테나를 연구하였다. 도파로는 폭이 2 ㎛, 높이가 0.5 ㎛인 실리콘 나이트라이드를 고려하였으며, 도파로의 끝단을 폭이 가늘어지는 도파관 안테나 구조로 변경한 결과 신호의 방출효율은 78%에서 96.3%까지 증가하고 반사율은 22%에서 3.7%까지 감소하는 것을 확인하였다. 이를 통해 종단방출형 광위상배열장치의 광신호의 세기를 증가시킬 수 있을 뿐만 아니라, 도파로를 따라 반사되는 후방반사에 따른 노이즈의 영향도 줄일 수 있음을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1819-1824
• /
• 2006

A microlens arrays formed by thermal reflow method is attached to an OLED device and the light extraction efficiency which includes luminance and power information is determined by adjusting the area ratio and the height ratio.

• ETRI Journal
• /
• 제24권3호
• /
• pp.255-258
• /
• 2002

We created a new design for an Nd-doped clad-pumped silica fiber laser to enhance the pump absorption and lasing efficiency for a butt-coupled, end-pumped scheme. Two concatenated adiabatic tapers formed within the laser cavity simultaneously removed higher order modes and were spliced to conventional single mode fibers. We theoretically analyzed mode propagation along the composite cavity and experimentally achieved continuous wave oscillation in the $LP_{01}$ mode at $1.06\;{\mu}m$ and a laser output power of over 820 mW with a slope efficiency of 27%.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.42-46
• /
• 2012

We have developed a fluorescence optical detection system using a digital micromirror device (DMD) for monitoring 3D cell culture matrices in situ. Full 3D imaging with fast scanning speed was implemented by the combined action of a DMD and a motorized stage. Imaging results with fluorescent microbeads measure the minimum axial resolution of the system as $6.3{\mu}m$, while full 1-mm scanning through 3D alginate-based matrix was demonstrated. For cell imaging, improved images were obtained by removing background fluorescence although the scanning distance was reduced because of low intracellular fluorescence efficiency. The system is expected to be useful to study various dynamics and behaviors of 3-dimensionally cultured cells in microfluidic systems.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.284-288
• /
• 2017

In order to investigate the ultraviolet-excited photoluminescence properties of phosphor coatings and their relationship to thickness, Lumogen coatings with different thicknesses were deposited on quartz substrates and charge-coupled device chips by thermal evaporation. The variation of the film thickness affected the crystallite size, surface roughness and fluorescence signal. It was found that the Lumogen coating with the thickness of 420 nm has the largest luminescent signal and conversion efficiency, and the corresponding coated charge-coupled devices had the maximum quantum efficiency in the ultraviolet. These results provided one key parameter for improving the sensitivity of Lumogen coated charge-coupled devices to ultraviolet light.