• 한국통신학회논문지
• /
• 제23권7호
• /
• pp.1777-1784
• /
• 1998

광 패킷 어드레스 처리기의 광섬유 지연선로 정합여파기 출력으로 나타나는 M-ary 상관 펄스를 검출하기 위해 EDFA 전치증폭기를 사용한 광 패킷 교환노드의 패킷 오율을 측정하였다. 어드레스 처리기에 사용된 PIN 다이오드의 잡음 등가전력, EDFA의 잡음지수와 이득, 그리고 광여파기의 대역폭이 노드의 패킷 오율에 미치는 영향을 비교 평가하였다. PIN 다이오드의 잡음 등가 전력과 EDFA의 이득은 패킷 오율 변화에 영향을 거의 미치지 않았으며, 통과 대역폭이 패킷 전송 속도의 약 10배 보다 적은 광 여파기를 사용한 경우에도 패킷 오율의 변화를 무시할 수 있었다. 그러나 EDFA의 잡음 지수가 증가하면, 본 논문에서 고려된 모든 전송속도와 어드레스 코드셋에서 잡음지수 증가량만큼 파워 페널티가 발생하였다.

• 한국광학회지
• /
• 제13권2호
• /
• pp.146-150
• /
• 2002

본 연구에서는 광통신 시스템에 응용할 수 있는 장파장용 광 싸이리스터(optcal thyristor)를 제안하고, 소자를 제작하여 그 특성을 측정 분석하였다. 발광과 수광의 기능을 수행하는 광 싸이리스터는 광 네트워크 구성의 핵심 소자로서 충분한 스위칭 전압이 요구되는데, 단일 광 싸이리스터에서 충분한 스위칭 전압 4.03(V)와 홀딩 전압(holding voltage) 1.77(V)를 얻었다. 또한 입력 전류에 따른 수광에 필요한 충분한 광량을 얻을 수 있었고, 입사 광에 따른 비선형 I-V특성의 변화량을 확인 할 수 있었다. 실험적으로 얻어진 장파장용 DOT의 비선형적 특성은 일정한 진폭을 유지 시켜주는 광 하드 리미터(optical hard-limiter), ATM패킷 헤더 프로세싱을 위한 광 ATM 패킷 스위cld, 파장 분할 다중화(WDM) 광전송 시스템에서 파장 라우팅을 위한 파장 변환기 등의 많은 광통신 용용 분야에 적용할 수 있다.

• 대한전자공학회논문지SD
• /
• 제40권2호
• /
• pp.88-97
• /
• 2003

본 논문에서는 위상부호 홀로그램 중첩 시스템에 대한 모의실험을 통하여 동일한 회절효율을 갖기 위한 각 홀로그램들의 기록시간을 계산한 후 이것을 하나의 이론식으로 유도하였다. 이러한 이론식을 이용하여 8비트, 16비트 및 32비트 위상부호 홀로그램 중첩 시스템에서의 홀로그램 회절효율이 각각 ±5%, ±7.2% 및 ±8.4%이내의 오차로 균일하게 주어짐을 모의실험을 통해 확인하였다. 그 다음 서로 다른 4개의 홀로그램을 BaTiO₃결정체에 중첩 저장 및 복원하는 실험을 실시하여 본 논문의 시간 분배가 기존의 방법에 비하여 복원되는 홀로그램들의 회절효율을 더욱 균일하게 만든다는 것을 확인하였다.

• 한국압력기기공학회 논문집
• /
• 제14권1호
• /
• pp.8-14
• /
• 2018

Printed circuit heat exchangers (PCHEs) are widely used with an increasing demand for industrial applications. PCHEs are capable of operating at high temperatures and pressure. We consider a PCHE as a candidate intermediate heat exchanger type for a high temperature gas-cooled reactor (HTGR). For conventional application using stainless steels, design and manufacturing of PCHEs are well established. For applications to HTGR, knowledge of longitudinal conduction and deformation of channel is required to estimate design margin. This paper analyzes the effects of longitudinal conduction and deformation of channel on thermal performance using a code internally developed for design and analysis of PCHEs. The code has a capability of two dimensional simulations. Longitudinal conduction is estimated using the code. In HTGR operating condition, about ten percent of design margin is required to compensate thermal performance. The cross-sectional images of PCHE channels are obtained using an optical microscope. The images are processed with computer image process technique. We quantify the deformation of channel with dimensional parameters. It is found that the deformation has negative effect on structural integrity. The deformation enhances thermal performance when the shape of channel is straight in laminar flow regime. It reduces thermal performance in cases of a zigzag channel and turbulent flow regime.

• Journal of Welding and Joining
• /
• 제33권1호
• /
• pp.87-93
• /
• 2015

This study was performed to develop repair technology for J-Groove dissimilar metal weld of pressurizer heater sleeve in nuclear power plants. Pad, J-Groove automatic welding and mechanical machining equipments to develop repair technology using 'Half Nozzle Repair' were designed and manufactured. To obtain the optimum welding process parameters during Pad temperbead overlay welding, several welding experiments using Taguchi method were conducted. Weldability of Pad overlay weld specimens was estimated by PT/RT test, FE-SEM, EDS and Vickers hardness test. Also, J-Groove welding to adjust weld shape conditions requiring in ASME Code was carried out and its integrity of weld specimens was evaluated through PT/RT test and optical microscope. Consequently, it was revealed that Pad and J-Groove overlay welding for dissimilar metal weld of pressurizer heater sleeve could be possible to meet Code standard without weld defect.

• 천문학논총
• /
• 제22권2호
• /
• pp.35-41
• /
• 2007

We present the result of radial velocity observation of a W UMa type binary star EX Leo. We observed the star on February 16, 2003, using Long-Slit spectrograph of BOAO(Bohyunsan Optical Astronomical Observatory). Since the spectral lines are broad due to its fast rotation, it is difficult to distinguish two radial velocities from cross correlation function. Instead of cross correlation function, we used broadening function to develop our own code which estimate the radial velocity of the broadened line spectra. With our own code, radial velocities of primary and secondary stars are derived simultaneously. From the radial velocity curve fit, we obtained $K_1=50.24{\pm}8.29km/s$ and $K_2=254.05{\pm}20.984km/s$ respectively.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.458-461
• /
• 2005

Surface Solar Insolation is important for vegetation productivity, hydrology, crop growth, etc. However, ground base measurement stations installed pyranometer are often sparsely distributed, especially over oceans. In this study, Surface Solar Insolation is estimated using the visible and infrared spin scan radiometer(VISSR) data on board Geostationary Meteorological Satellite (GMS)-S covering from March 2001 to December 2001 in clear and cloudy conditions. To retrieve atmospheric factor, such as, optical depth, the amount of ozone, H20, and aerosol, SMAC (Simplified Method for Atmospheric Correction) code, is adopted. The hourly Surface Solar Insolation is estimated with a spatial resolution of $5km\;\times\;5km$ grid. The daily Surface Solar Insolation is derived from the available hourly Surface solar irradiance, independently for every pixel. The pyranometer by the Korea Meteorological Agency (KMA) is used to validate the estimated Surface Solar Insolation with a spatial resolution of $3\;\times\;3Pixels.$

• 한국인쇄학회지
• /
• 제13권1호
• /
• pp.93-104
• /
• 1995

Liquid crystal-polymer composite(LCPC) films promising new materials for both projection displays and vision product. LCPC films consist of a continous liquid crystal phase embedded in a three- dimensional network of polymer matrix. The liquid crystal in these LC phases can be elecrtrically switched giving rise to an opaque scattering off-stats and a transparent, non-scatting on- stats. In this work. a premixture is composed of LC, UV-curable monomer and photonitiator. LCPC films are formed by photopolymerization induced phase separation from this premixture. In conclusion, structure and electro-optical properties of LCPC films strongly depends on the selection of monomer, LC content and curing rate.

• 로봇학회논문지
• /
• 제6권1호
• /
• pp.49-57
• /
• 2011

In many industries, the accurate and quick checking of goods in storage is of great importance. Most today's inventory checking is based on bar code scanning, but the relative position between a bar code and an optical scanner should be maintained in close distance and proper angle for the successful scanning. This requirement makes it difficult to fully automate the inventory information/control systems. The use of RFID technology can be a solution for overcoming this problem. The mobile robot presented in this paper is equipped with an RFID tag scanning system, that automates the otherwise manual or semi-automatic inventory checking process. We designed the robot system in a quite practical approach, and the developed system is close to the commercialization stage. In our experiments, the robot could collect information of goods stacked on shelves autonomously without any failure and maintain corresponding database while it navigated predefined paths between the shelves using vision.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1609-1614
• /
• 2003

In this study, a practical holographic interferometric tomography system, which is instantaneous and non-contact for measuring three dimensional flow field, was developed. The system consists of holographic recording/reconstruction system, fringe analysis code and computational tomography code and it is developed with Gill environment for general users. The developed system was applied to three-dimensional natural convection from a discrete flush-mounted circular heat source on the bottom of a cubic enclosure. The heat source was located at the off-center of the bottom plate so that three-dimensional temperature field can be achieved. A set of multi-directional holographic interferograms was recorded by employing a double-reference beam, double-exposure holographic technique. Optical pathlength data were extracted from the recorded interferometric data and finally three dimensional temperature field inside the cube was reconstructed.