• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.256-263
• /
• 2007

High NA objective design by using SELFOC materials was studied, and two kinds of objective for optical pick-up were designed. The SELFOC materials have radial gradient index distribution, and it gives additional degree of freedom in optical design. Therefore, we expect that optical design of high NA objective without aspheric surface will be possible. In this study, the variation of ms spot diameter was investigated as a function of quadratic constant and refractive index on axis for various combinations of axial thickness and entrance pupil diameter. For the survey, Code V was used for optimization and evaluation of the objective lenses. The result suggested that larger quadratic constant and higher refractive index on axis could give us better imaging performance for all combinations of axial thickness and pupil diameter. Based on the survey, we designed high NA objectives for DVR. There were two kinds of design solution consisting two spherical SELFOC lenses. The solution I had positive-positive lens configuration with short over-all-length, but it had poor off-axial performance compared with the solution II. The solution II had negative-positive lens configuration with good off-axial imaging performance. But the solution II had some disadvantages, long over-all-length and large diameter of the second lens.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1246-1251
• /
• 2011

In this paper, BPSK-OFDM-based LED communication systems are applied to watermarking techniques, were studied on how to transfer the additional information data with at the same time as the transfer of LED communication data. For watermarking kasami code was used as spreading codes, and spread additional data is controlled by small signal level to be BPSK-OFDM does not affect the optical signal. BPSK-OFDM is added to an optical signal is transmitted. The performance of the spreading code as a kasami code is autocorrelation of the noise-free environment, under the noise environment was confirmed by autocorrelation. BPSK-OFDM-based LED communication system has been applied proposed technique throughout the simulation in analyzed to BER of BPSK-OFDM DER performance and watermark signal level according to signal size level of data. That was availability confirmed for watermarking data transmit techniques data as being analysis detection performance of watermarking information using LED communication according to the code.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.256-259
• /
• 2003

This paper proposes OPTICAL MARKER fer registering process - one of the 3D measurement process : scan registering - merging - measurement. If the registering work is carried out manually, it can be accompanied with much time and many errors. Because the patterned marker make registering process automatic, many firms use it now. But the physical shape of existing markers is the source of the data loss caused by hiding surface, and the marker arrangement is the source of the time loss. The optical marker proposed in this paper has marker generator, organized a large number of binary coded control laser diode, separate from 3D scan object. So, it does not take much time for the marker disposition, and it is not the origin of the data loss, and the binary coded laser information make the auto-registering possible.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.90-91
• /
• 2000

광섬유는 수십THz이상의 넓은 대역폭과 0.2-0.4 dB/Km의 적은 전송손실의 우수성을 가지고 있으므로 이를 CDMA시스템에 적용하면 고속, 대용량의 데이터 전송 및 비동기식 전송의 장점이 있으므로 광 LAN이나 광 교환기 등의 광통신 네트워크에 유용하게 사용할 수 있다$^{[1][2]}$ . 그러나 광CDMA시스템은 다수 사용자가 동시에 데이터를 전송할 때 다른 사용자의 데이터 전송으로부터 발생되는 오류정보를 최소화하기 위해 최적의 자기상관 및 상호상관특성을 가져야 자신의 정보데이터를 복원할 수 있다$^{[3]}$ . 따라서 본 논문에서는 광섬유 지연선을 이용한 광 CDMA시스템에서 코드구성을 광 직교 코드로 하였을 경우 컴퓨터 시뮬레이션을 통한 시스템 해석에 대하여 서술한다. 컴퓨터 시뮬레이션을 통해 광 직교 코드를 사용한 경우 사용자수가 증가함에 따른 최적의 자기상관 및 상호상관특성을 갖는 코드를 구하고, 임계값 변화에 따른 에러확률을 분석한다. (중략)

• Journal of the Optical Society of Korea
• /
• v.5 no.1
• /
• pp.5-8
• /
• 2001

In this work, we studied the effect of chirped grating on optical bistability in λ/4-shifted semiconductor distributed-feedback(DFB) devices, such as an etalon with nonlinear mirrors, a λ/4-shifted DFB waveguide and aλ/4-shifted DFB laser amplifier. We found that chirped DFB devices exhibit bistable switching at a lower input power.OCIS code : 050.2770, 190.1450, 190.5970, 230.0230.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.991-997
• /
• 2003

A flow field around a disc in an optical disc drive is invested using numerical methods. The high-speed rotating disc induces a strong flow field around the disc, which causes the pressure distribution on the surfaces of the disc. The pressure difference between the upper and the lower surfaces causes the deformation of the disc. In the first part of this study, flow fields around a rotating disc and a stationary wall are investigated using a similarity solution method, in order to identify the effect of the distance between the disc and the wall on the pressure distribution on the surfaces of the disc. In the second part, flow field in a slim-type optical disc drive is studied using a commercial code in order to consider the effect of the vortices generated by the local geometry of the drive.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.642-646
• /
• 2005

We propose an improved partial response maximum likelihood (PRML) detector with the branch value compensation of Viterbi decoder for asymmetric high-density optical channel. Since the compensation value calculated by a survival path is applied to each branch metric, it reduces the detection errors by the asymmetric channel. The proposed PRML detection scheme improves the detection performance on the $2^{nd},\;3^{rd}\;and\;4^{th}$ order PR targets for asymmetric optical recording channel.

• Molecules and Cells
• /
• v.45 no.12
• /
• pp.877-882
• /
• 2022

Taste sensation is the process of converting chemical identities in food into a neural code of the brain. Taste information is initially formed in the taste buds on the tongue, travels through the afferent gustatory nerves to the sensory ganglion neurons, and finally reaches the multiple taste centers of the brain. In the taste field, optical tools to observe cellularlevel functions play a pivotal role in understanding how taste information is processed along a pathway. In this review, we introduce recent advances in the optical tools used to study the taste transduction pathways.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.289-289
• /
• 2009

Light emitting diode(LED) has many advantages including lower energy consumption and longer lifetime and eco-friendly in comparison with traditional light sources. Spheric plastic lens generally used in LED lighting occurs aberration and ghost image which give displeasure and deteriorate vision quality in human eyes. Using the optical program (LightTools$^{TM}$, CodeV$^{TM}$), we were confirm the aberration and ghost image in optical simulation and employed aspheric lens form in the lens design to improve these problems. From the comparison of the simulation results between the aspheric lens and the spheric lens, we were ascertain to be improved both aberration and Ghost image.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.447-453
• /
• 2013

A micro zoom system without moving elements by use of two liquid lenses is designed and optimized in this paper. The zoom equations of the system composed of two liquid lenses are deduced. The structure parameters including radius and thickness of a conical double-liquid electrowetting based lens are analyzed and calculated. Because the liquid thickness varies non-linearly with the radius of the interface, it's very difficult to optimize a real liquid lens using commercial optical design software directly. Through the Application Programming Interface (API) of the optical design software CODE V, a zoom system with two real electrowetting based liquid lenses is modeled and optimized. A two-liquid-lens zoom system without moving elements, with a zoom factor of 1.8 and a compact structure of 10 mm is designed for illustration. This can be useful for the camera design of mobile phones, tablets and so on. And this paper presents a convenient way of designing and optimizing a zoom system including liquid lenses by commercial optical design software.