• 대한의용생체공학회:의공학회지
• /
• 제15권1호
• /
• pp.97-104
• /
• 1994

In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensionaloptic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the infrared thermography system composed ofthe proposed optic system has the temperature resolution of $0.1{\circ}C$ under the spatial resolution of 1mrad, the image matrix size of $256{\times}240$, and the imaging time of 4 seconds.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.203-206
• /
• 2003

Thermo-optic tunable filter, with 4-pairs of H/L layers for DBR, was designed and fabricated. The transmittance characteristics of the filter were measured. Additionally, heating system and temperature sensor system were used in order to observe property of the filter by thermo-optic effect. The tuning efficiency of the filter was measured to be 0.144nm/K$^{-1}$ showing the tuning range of 9.4nm for the temperature variation of 64.7$^{\circ}C$. Filter, lens and fiber were aligned by micro-optical bench.

• 한국정밀공학회지
• /
• 제24권10호
• /
• pp.7-12
• /
• 2007

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.55-60
• /
• 2005

This paper has been focused in developing of plastic lens with ultra-precision and low birefringence ability using by injection molding simulation tools. The simulation tools, $3D-Timon^{TM}\;and\;Asu-Mold^{TM}$ were applied to visualize indirectly the flow pattern of melted polymer enter the mould and the simulation results are verified as compared with the experimental results. Birefringence and polarized light generated in injection molding process was also calculated for each injection conditions and compared with .the pictures of experimented optical lens go through the polarized light plates device. A spherical radius of plastic optical lens transcribed from profile of mould core surface was measured to estimate the geometrical accuracy fer the each injection conditions. It is confirmed that the simulation results about flow pattern and polarized light area coincided in experimental results. It is known that increasing in thickness shrinkage at center of lens, the spherical radius is larger from comparing the graph measured spherical radius and the thickness shrinkage at center of lens

• 한국안광학회지
• /
• 제20권3호
• /
• pp.285-291
• /
• 2015

목적: 하이드로겔 콘택트렌즈에 HA(hyaluronic acid)를 IPN(interpenetrating polymer network)방법과 화학적 공유결합 방법(CCB; Chemical covalent bonding)으로 첨가하였을 때 광투과율과 함수율의 물리적 특성과 lysozyme 흡착량을 비교하여 하이드로겔 콘택트렌즈의 기능성 부여를 위한 효과적인 HA의 첨가방법을 살펴보고자 한다. 방법: 실험실에서 제조한 하이드로겔 콘택트렌즈에 IPN과 CCB의 두 가지 방법으로 HA를 첨가하였다. 광투과율은 300~800 nm 범위에서 측정하였으며, 함수율은 0.9% NaCl 생리 식염수를 사용하여 중량측정법으로 측정하였다. Lysozyme 흡착량은 lysozyme이 포함된 인공눈물을 제조하여 12시간동안 흡착시킨 후 HPLC로 정량하였다. 결과: HA가 첨가된 하이드로겔 콘택트렌즈의 함수율은 HA가 첨가되지 않은 렌즈에 비해 증가하였으며, CCB 방법에 비해 IPN 결합에서 함수율이 더 높게 나타났다. 광투과율은 HA 첨가 전과 후 모두 90% 이상으로 나타났다. Lysozyme 흡착 감소율은 IPN 방법으로 제조한 콘택트렌즈는 60.0%이며, CCB 방법으로 제조한 콘택트렌즈에서는 40.4%로 나타났다. 결론: CCB 방법은 기능성 물질을 렌즈 내부와 표면 전체에 화학적으로 균일하게 분포시키기에 적절한 방법이며, IPN 방법은 상분리 없이 렌즈 표면에 기능성을 부여하기에 적절한 방법으로 여겨진다.

• Current Optics and Photonics
• /
• 제2권3호
• /
• pp.241-249
• /
• 2018

We report a midinfrared dual-field-of-view (FOV) optical system design for an airborne electro-optical targeting system. To achieve miniaturization and weight reduction of the system, it has a common aperture and fore-optics for three different spectral wavelength bands: an electro-optic (EO) band ($0.6{\sim}0.9{\mu}m$), a midinfrared (IR) band ($3.6{\sim}4.9{\mu}m$), and a designation laser wavelength ($1.064{\mu}m$). It is free to steer the line of sight by rotating the pitch and roll axes. Our design co-aligns the roll axis, and the line of sight therefore has a fixed entrance pupil position for all optical paths, unlike previously reported dual-FOV designs, which dispenses with image coregistration that is otherwise required. The fore-optics is essentially an achromatized, collimated beam reducer for all bands. Following the fore-optics, the bands are split into the dual-FOV IR path and the EO/laser path by a beam splitter. The subsequent dual-FOV IR path design consists of a zoom lens group and a relay lens group. The IR path with the fore-optics provides two stepwise FOVs ($1.50^{\circ}{\times}1.20^{\circ}$ to $5.40^{\circ}{\times}4.32^{\circ}$), due to the insertion of two Si lenses into the zoom lens group. The IR optical system is designed in such a way that the location and f-number (f/5.3) of the cold stop internally provided by the IR detector are maintained when changing the zoom. The design also satisfies several important performance requirements, including an on-axis modulation transfer function (MTF) that exceeds 10% at the Nyquist frequency of the IR detector pitch, with distortion of less than 2%.

• 조명전기설비학회논문지
• /
• 제27권4호
• /
• pp.1-7
• /
• 2013

Optical characteristics including the view angle and color temperature uniformity of LED packages with an integrated lens fabricated by compression molding method are investigated according to lens shape, lens materials, and phosphor coating methods. Four types of lens shape are designed and their optical output power dependence on the refractive index of silicone encapsulant are evaluated. Also, spatial color temperature uniformities of packages fabricated with different phosphor coating methods-direct coating on a chip vs. uniformly mixed with silicone encapsulant- are compared at various view angles. As the result, it is found that phosphor coating method is more effective on color temperature uniformity than lens shape. The maximum color temperature difference of a package with direct coating of phosphor on a chip is 1,340K according to the view angle at the color temperature of 5,000K, and that of a package with uniformly mixed phosphor is 250K, which indicates 1,090K improvement of color uniformity for the latter case.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.25-32
• /
• 2010

Compared to general lighting method, the lighting system that uses optic fiber can provide only the visible light of good quality to subject by eliminating ultraviolet ray and infrared ray. Thanks to this merit, it is possible to prevent the hard phenomenon of subject caused by ultraviolet ray and infrared ray and to provide the agreeable light environment. This study developed indoors illumination system of high color rendering on the basis of plastic optic fiber with excellent optical property and processing to substitute halogen lamp which has been used for excellent color rendering in spite of low efficiency and short life. Producing pilot product of the designed illumination system and evaluating the property of electric and optical property, ultraviolet ray radiation quantity and temperature property, this study verified the excellence of suggested lighting system of plastic optic fiber.

• 한국안광학회지
• /
• 제11권2호
• /
• pp.77-83
• /
• 2006

본 연구에서는 프리즘 처방을 위해 편심된 안경렌즈의 산각위치에 따른 수차와 경사각에 따른 수차를 계산하였다. 프리즘 처방을 위해서 일반적으로 일반 렌즈를 편심시켜 만든다. 광축과 주시축 사이의 차이는 수차를 발생시키기 때문에, 이런 경우 산각의 위치가 중요하다. 우리는 계산을 통하여 산각 회전 띠의 축이 (+)렌즈의 전면 곡률 중심을 지나는 것이 후면곡률 중심을 지나는 것보다 비점수차가 적게 발생하였고, 산각 회전 띠의 (-) 렌즈의 후면곡률 중심을 지나는 것이 전면보다 비점수차가 적게 발생한다는 결과를 얻었다. 렌즈의 굴절력이 클수록 비점수차가 작았다.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.39-46
• /
• 2008

Asymmetric glass lens core for portable projection optic system was designed and simulated. And it was machined by newly developed non-rotational ultra precision grinding method. With the designed lens data which optimized for multi-collimation, we generated the we core surface data. Mold pressing conditions analyzed by FEM. In the machining process, ground profile errors were compensated based on measured data, minimized feed rate and depth of cut. The deviations of machined core profile were acceptable level for glass mold press. Mold pressed glass array lens was coated with $SiO_2\;and\;Ta_2O_5$ for anti-reflection.