• Ocean and Polar Research
• /
• v.43 no.3
• /
• pp.179-192
• /
• 2021

In this study, an integrated wave model from global to coastal scales was developed to improve the operational wave prediction performance of the Korean Meteorological Administration (KMA). In this system, the wave model was upgraded to the WaveWatch III version 6.07 with the improved parameterization of the source term. Considering the increased resolution of the wind input field and the introduction of the high-performance KMA 5^th Supercomputer, the spatial resolution of global and regional wave models has been doubled compared to the operational model. The physical processes and coefficients of the wave model were optimized for the current KMA global atmospheric forecasting system, the Korean Integrated Model (KIM), which is being operated since April 2020. Based on the sensitivity experiment results, the wind-wave growth parameter (β_max) for the global wave model was determined to be 1.33 with the lowest root mean square errors (RMSE). The value of β_max showed the lowest error when applied to regional/coastal wave models for the period of the typhoon season when strong winds occur. Applying the new system to the case of August 2020, the RMSE for the 48-hour significant wave height prediction was reduced by 13.4 to 17.7% compared to the existing KMA operating model. The new integrated wave prediction system plans to replace the KMA operating model after long-term verification.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.110-117
• /
• 2003

The operational characteristics of the landing gear retraction/extension depend on the complexity of design variables operational/environmental conditions. In order to meet the requirements of minimum stow area and performance, the integration of the landing gear system requires operational kinematic and dynamic analysis considering an effect of its related system. This study investigates operational dynamic behaviors of the T-50 landing gear system using ADAMS. Taking into account for various operational/environmental conditions, an analysis of dynamic behavior on the landing gear operational characteristics is performed with experience derived from a wide range of proprietary designs. Analytical results are presented for discussing the effects of temperature, aerodynamic and maneuver load on normal/emergency operation of the landing gears and doors. This analysis leads us to the conclusion that the proposed program is shown to be a better quantitative one that apply to a new development and troubleshooting of the landing gear system.

• Culinary science and hospitality research
• /
• v.20 no.6
• /
• pp.175-189
• /
• 2014

This study was intended to provide fundamental data concerning franchising companies' characteristics and performance in foodservice business by employing financial data from the firms' IDS(Information Disclosure Statements). Multiple regression analysis method was used to identify any correlations among franchising size, marketing competency, operational characteristics, and performance according to technique based upon 169 IDS data as of 2013. In terms of franchisor size and performance, the number of company-operated stores had statistically significant corelation with sales, net income, the total number of stores, and the number of franchisees. With respect to marketing competency and performance, advertising expenses showed statistically significant correlation with sales, the total number of stores, promotion expenses with sales, net income, and the total number of stores. On the other hand, there was no statistically significant correlation with current year's net income. At last, present study found significant correlations among business years, sales, current year's net income, and the total number of stores by regarding operational characteristics and performance, but there was no significant correlation between brands and performance. This study is cross-sectional study which is a limitation to be overcome in further studies. In addition, it is required to review the possibility for franchise management style to contribute to expanding the Korean traditional foods.

• Atmosphere
• /
• v.32 no.2
• /
• pp.87-101
• /
• 2022

In this paper, the performance improvement for the new KMA's Climate Prediction System (GloSea6), which has been built and tested in 2021, is presented by assessing the bias distribution of basic variables from 24 years of GloSea6 hindcasts. Along with the upgrade from GloSea5 to GloSea6, the performance of GloSea6 can be regarded as notable in many respects: improvements in (i) negative bias of geopotential height over the tropical and mid-latitude troposphere and over polar stratosphere in boreal summer; (ii) cold bias of tropospheric temperature; (iii) underestimation of mid-latitude jets; (iv) dry bias in the lower troposphere; (v) cold tongue bias in the equatorial SST and the warm bias of Southern Ocean, suggesting the potential of improvements to the major climate variability in GloSea6. The warm surface temperature in the northern hemisphere continent in summer is eliminated by using CDF-matched soil-moisture initials. However, the cold bias in high latitude snow-covered area in winter still needs to be improved in the future. The intensification of the westerly winds of the summer Asian monsoon and the weakening of the northwest Pacific high, which are considered to be major errors in the GloSea system, had not been significantly improved. However, both the use of increased number of ensembles and the initial conditions at the closest initial dates reveals possibility to improve these biases. It is also noted that the effect of ensemble expansion mainly contributes to the improvement of annual variability over high latitudes and polar regions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.1
• /
• pp.22-28
• /
• 2006

Establishment of practicalization technologies is becoming more important as dissemination of domestic PV system has been increased. To improve performance through PV system optimization, this paper presents loss factors analysis of PV system based on results of field operational test. Also, as simulation results are compared with actual operational ones, the main loss factors of PV system due to performance degradation are reviewed.

• IE interfaces
• /
• v.25 no.4
• /
• pp.431-440
• /
• 2012

Since pooling is a popular scheme in many areas to attain operational excellence, many researchers investigated the performance of pooling systems. However, rare research could be found on pooling with game situation which has much applicability to real world phenomenon. We analyze the performance of noncooperative pooling system with two servers having different sharing capacity. We investigate the sensitivity of the advantage of capacity pooling on the variation of system parameters, including sharing capacity numbers, pooling probability, pooling strategy and traffic intensity. As a result, we suggest an efficient control policy which facilitate the performance of pooling in a game situation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.81-89
• /
• 2008

University Research Centers specialized in defense technology(DURCs) were designed to develop fundamental knowledge and to acquire core technologies related to defense development by conducting creative and interdisciplinary research. The centers also have a function of fostering scientists and practitioners possessing defense-oriented cross-disciplinary knowledges. Since the outset of the DURC in 1994, Sixteen DURCs have been funded and eleven DURCs are now in operation. The purpose of this paper is to analyse the operational status and the performance of DURCs and to suggest ideas on improving the effectiveness of the DURC program by comparing with the Korea Excellent Research Center program and the U.S. National Science Foundation(NSF) Engineering Research Center(ERC) program.

• Journal of the Korea Society for Simulation
• /
• v.3 no.1
• /
• pp.55-63
• /
• 1994

FMS is two or more computer controlled units interconnected with automated workhandling equipment and supervised by an executive computer having random scheduling capabilities. The complex nature of a FMS, coupled with the need to maximize its performance, means that such a system can be effectly designed only by iterative computer simulation methods. At the operational level, simulation had a reduced role to evaluate the performance of planned FMS under a variety of operating strategies. This is probably due to the fact that few simulation models are able to access the current status data of the system. This study reviews the role of simulation for design/operation of FMS and suggests an interface scheme for incorporating a simulation package with a FMS operational database. This scheme can be used for reducing the performance gap between design and real operation of a FMS.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.66-75
• /
• 2000

The purpose of this study is to develop and illustrate methods of applying trade-off techniques to landing craft air cushion design evaluation. The problem areas of concern are the application of quantitative analytical methods to conceptual design. The interrelationships between composite system measures and selected performance requirements(speed, cruising range, cargo etc.) are analyzed and the expressions for gross weight are developed as functions of performance parameters. Trade-offs of performance parameters in terms of weight are then calculated. The application of these results to evaluation of Require Operational Capabilities are illustrated.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.494-497
• /
• 2012

A methodology to predict the output performance of small hydro power using treated effluent in wastewater treatment plant has been studied. Existing plant located Kyunggi-Do were selected and the output performance characteristics for these plants were analyzed. As a result, it was found that the developed model in this study can be used to analyze the output characteristics for small hydro power in wastewater treatment plant. Additionally, primary design specifications such as design flowrate, capacity, operational rate and annual electricity production were estimated and discussed.