• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.197-203
• /
• 2004

Railway system is consisted of various resources such as rail-line, signal, and railcar. It is necessary to efficiently utilize these limited and expensive resources as much as possible up to given line capacity. So far, we treat the line capacity as the criteria for evaluating investment alternatives or for restricting train frequencies, and this criteria is calculated statical and experimental numerical formula. But, line capacity has special attribute that changes dynamically according to operational conditions, so there is a need of new line capacity estimation system. In this paper, we present an improved systematic line capacity model. The proposed model has three main components ; TPS(lain performance simulator), PES(parameter evaluation simulator), LCS(line capacity simulator). The concept of each sub-component is described, including the evaluation method of capacity parameters. And capacity parameter evaluation and estimation results using sample line section data are presented.

• 한국철도학회논문집
• /
• 제4권2호
• /
• pp.47-54
• /
• 2001

Railway companies have been faced with many changes in the railway environment. To cope immediately with the influence of environment and to improve productivity, an efficient train operation system and related core technologies must be introduced. The railway system is composed of large scale infrastructures and high-cost trains. Simulation method is one of core technologies and also efficient tool for planning and analyzing these kinds of complex system. In this research, we review basic simulation programming models and present a modeling for the elements of railway system such as rail-line infrastructure, train, time table and operational route. Additionally, some considerations on the development of multi-train traffic simulator for KyongBu-line are discussed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.45-47
• /
• 2008

This paper describes development of PMSG wind power system model using wind turbine simulator and matrix converter. The wind turbine simulator, which consists of an induction motor with vector drive, calculates the output torque of a specific wind turbine using simulation software and sends the torque signal to the vector drive after scaling down the calculated value. The operational feasibility of interconnected PMSG system with matrix converter was verified by computer simulations with PSCAD/EMTDC software. The simulation results confirm that matrix converter can be effectively applied for the PMSG system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.329-333
• /
• 2005

In this study paper, a 3[kW] Fuel Cell Generation (FCG)system with Fuel Cell(FC)simulator has been proposed. The developed FC simulator generates the actual voltage and current output characteristics of the Proton Exchange Membrane Fuel Cell (PEMFC), so that the overall performance and the dynamics of the proposed system could be effectively examined and tested. In this paper, at first, the system configuration and operational principle of the developed FC simulator has been investigated and the design process of the FCG system is explained in detail. In addition, the validity of the proposed system has been verified by the informative simulation and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.344-346
• /
• 1998

The OBCS(On-Board Computer System) achieves train system diagnosis and control. For commercial train operation, it must guarantee the reliability for safe and have low cost operational algorithm. To guarantee the diagnosis function and the control ability of OBCS, sufficient actual railway running test under severe conditions is required. But, running test has some limitations for making severe conditions because of safety and it demands quite long time and a lot of costs. So simulator is required and is utilized in many countries. We designed a simulator to test various functions and performance of controllers for high speed train's power car under various conditions and it is represented briefly.

• 센서학회지
• /
• 제6권2호
• /
• pp.145-154
• /
• 1997

회로 시뮬레이션과 국부적 탐색을 갖는 시뮬레이티드 아닐링을 사용한 새로운 탐색 전략에 기초하여 고성능 연산 증폭기의 설계 자동화를 위한 기법을 제안하였다. 임의의 연산 증폭기 구조와 성능 규격에 대해서, 이산 설계 변수들을 갖는 비용 함수의 이산 최적화를 통해 연산 증폭기의 설계가 이루어진다. 설계 시간의 단축을 위해서 전용 회로 시뮬레이터와 몇 가지 휴리스틱을 사용하였다. 스마트 센서와 10 비트 25 MS/s 파이프라인 A/D 변환기에 사용 가능한 저전력 고속 전차동 CMOS 연산 증폭기의 설계를 통해서, 제안된 기법을 사용하여 개발된 설계 도구는 적은 설계 지식과 설계 노력을 가지고 고성능 연산 증폭기를 설계하는데 사용될 수 있음을 보였다.

• Nuclear Engineering and Technology
• /
• 제37권1호
• /
• pp.79-90
• /
• 2005

In this paper are reviewed the current status of nuclear fuel management and reactor operational aid tools. In addition, we indicate deficiencies in current capabilities and what future research is judged warranted. For the nuclear fuel management review the focus is on light water reactors and the utilization of stochastic optimization methods applied to the lattice, fuel bundle, core loading pattern, and for BWRs the control rod pattern/core flow design decision making problems. Significant progress in addressing separately each of these design problems on a single cycle basis is noted; however, the outstanding challenge of addressing the integrated design problem over multiple cycles under conditions of uncertainty remains to be addressed. For the reactor operational aid tools review the focus is on core simulators, used to both process core instrumentation signals and as an operator aid to predict future core behaviors under various operational strategies. After briefly reviewing the current status of capabilities, a more in depth review of adaptive core simulation capabilities, where core simulator input data are adjusted within their known uncertainties to improved agreement between prediction and measurement, is presented. This is done in support of the belief that further development of adaptive core simulation capabilities is required to further significantly advance the utility of core simulators in support of reactor operational aid tools.

• 산업공학
• /
• 제8권1호
• /
• pp.45-52
• /
• 1995

Automated Storage and Retrieval System (AS/RS), which is an element of Computer Integrated Manufacturing (CIM), is a widely used material handling equipment with conveyors and Automatic Guided Vehicles (AGVs). Until now the evaluation of operational policies of AS/RS and control algorithms is done theoretically or by computer simulations. In this study, a real-time control and communication software for an AS/RS is developed for actually moving AS/RS miniature. A PC-based real-time operational program can control the AS/RS directly through the communication port. The operational system has additional functions such as storage/retrieval management, inventory management, statistics management, and protocol simulation. The communication protocol simulator of S/R machine can be used for the controller of an S/R machine.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.49-53
• /
• 1994

Advanced Real-Time Satellite Simulator(ARTSS) has been developed to support the telemetry, tracking and command operations of the ETRI satellite control system and to provide satellite engineers a more powerful and informative satellite simulations tool on the desktop. To provide extensive simulation functions for a communication satellite system in the pre-operational and operational missions, ARTSS uses a geosynchronous orbit(GEO) satellite model consisting of the attitude and orbit control subsystem, the power subsystem, the thermal subsystem, the telemetry, command and ranging subsystem, and the communications payload subsystem. In this paper, the system features and functions are presented and the satellite subsystem models are explained in detail.

• 한국항해항만학회지
• /
• 제33권10호
• /
• pp.665-669
• /
• 2009

수역에서 항행할 시, 선박운항자는 위험을 회피하기 위해 타와 주기관 사용 등 여러 가지 조종요소를 사용하게 된다. 그 때 어느 정도의 조작량을 사용하는 가에 관해서는 선박운항자 개인의 특성에 따라 그 사용량 및 빈도는 달라지게 된다. 그러나 이러한 조종 요소의 빈번한 사용은 선박운항자에게 일정한 부하를 주게 될 것으로 생각된다. 본 연구에서는 이 부하를 조종부하로 정의하고, 교각이 설치된 직선 항로를 통항하는 시뮬레이터 실험을 통하여 조선 곤란성과의 관계를 접근하고자 하였다. 사용한 변수 항목으로는 우회와 감속과 이러한 조종 행동에 따른 항행시간 연장률 및 조선 곤란성(Environmental Stress) 수치를 이용하였다.