• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.73-84
• /
• 1999

An advanced expert system for supporting automatic polishing operation of mold and die has been developed. The goal of this system is to minimize the polishing time, the number of polishing and tools used. Also, this paper proposes the advanced concept of the polishing method to perform polishing operation of mold and die, and it has adapted to the orthogonal array method. as a statistical technique, to choose an optimal polishing condition. An expert system consists of the polishing machining database that includes the information of workpiece and polishing tools, and the input/output module.

• Journal of Multimedia Information System
• /
• 제6권4호
• /
• pp.203-208
• /
• 2019

Fast operation of a CNN based object detection is important in many application areas. It is an efficient approach to reduce the size of an input image. However, it is difficult to find an area that includes a target object with minimal computation. This paper proposes a ROI detection method that is fast and robust to noise. The proposed method is not affected by a flicker line noise that is a kind of aliasing between camera and LED light. Fast operation is achieved by using down-sampling efficiently. The accuracy of the proposed ROI detection method is 92.5% and the operation time for a frame with a resolution of 640 × 360 is 0.388msec.

• 한국임상수의학회지
• /
• 제21권4호
• /
• pp.343-348
• /
• 2004

This study was carried out to investigate the difference between sutured anastomosis and stapler anastomosis (open lumina technique) of jejunum in dogs. Fifteen mongrel-breed female dogs weighting 4 to 6 kgs were allocated to three groups; sutured end-to-end anastomosis (Group I), sutured side-to-side anastomosis (Group II) and stapler anastomosis (Group III), five dogs per each group. All dogs in different anastomosis pattern were compared with time for total operation and suture elapsed for intestines to anastomose, clinical signs, status of feces, complications for 14 days after operation. The total operation time and suture time needed for intestinal anastomosis were significantly(p<0.05) shorter in Group III than Group I and II. All dogs showed no significant difference in vitality, appetite, vomiting between groups for 14 days after operation. All dogs, except one dog in Group II, showed normal vitality and appetite since 7-8 days after operation. Initial return of fecal passage showed in all dogs 8 days after operation and thereafter normal feces were observed in most of the dogs. According to results, all dogs with normal vitality and appetite for 8 days showed good prognosis. In complications after operation, only one dog in Group II showed dehiscence of anastomotic site. There was significant(p<0.05) differences between groups in speed of operation. And all dogs, except one dog in Group II, showed good clinical condition and prognosis. In conclusion, the stapler anastomosis is considered to be more reliable, faster, and precision method compared to the sutured anastomosis for intestinal anastomosis in dogs.

• 한국IT서비스학회지
• /
• 제6권3호
• /
• pp.87-110
• /
• 2007

Recently, researches on IT Service Management (ITSM) for improving information system operation service and information system outsourcing cost estimation model are proliferating. This study suggests a new cost model of IT operation service and optimizing method based upon the characteristics of operation service as a long-term and continuous business service for both user's and service provider's point of view. This study explains the cost optimization model of IT operation service by improving service request management process, such as adequate reception and control, proper valuation, process management using project management methodology, effective organization and time management of service personnel. Especially in this study, service ability improvement effect and fixed operation cost reduction effect are defined to prove the proposed new cost model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1018-1020
• /
• 2000

In the operation and maintenance activity of hydro turbine generator, one of the important parameters is the efficiency. This study analyze the case of efficiency management by pressure time method and survey the application of this method through the actual test. And it is confirmed that the Pressure time method exccesively limit the general condition to be applied. If index method is used for efficiency management because the index method calibrated by absolute discharge(by flow of pressure time method) is very accurate. it make to be able to manage the realtime efficiency.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.653-661
• /
• 2016

This paper proposes a capacitance estimation method of the dc-link capacitor for brushless DC motor (BLDCM) drive systems. In order to estimate the dc-link capacitance, the BLDCM is operated in quadrant-II or -IV among four-quadrant operation. Quadrant-II and -IV are called reverse braking and forward braking, respectively. During the braking operation of the BLDCM, the capacitor is charged by the phase current and then the voltage is increased during the braking operation time. The capacitor current and voltage can be obtained by using the phase current sensor of BLDCM and the dc-link voltage sensor. The capacitance and be easily obtained by the voltage equation of the capacitor. The proposed method guarantees the reliable and simple calculation of the dc-link capacitance without additional hardware system except several the sensors already installed for the motor control system. The effectiveness of the proposed method is verified through both the simulation and experimental results.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.149-154
• /
• 2013

Short term load forecasting for electric power demand is essential for stable power system operation and efficient power market operation. High accuracy of the short term load forecasting can keep the power system more stable and save the power market operation cost. We propose an optimal coefficient selection method for exponential smoothing model in short term load forecasting on weekdays. In order to find the optimal coefficient of exponential smoothing model, load forecasting errors are minimized for actual electric load demand data of last three years. The proposed method are verified by case studies for last three years from 2009 to 2011. The results of case studies show that the average percentage errors of the proposed load forecasting method are improved comparing with errors of the previous methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1927-1932
• /
• 2003

In a previous study, the authors have proposed the Cooperative Collision Avoidance (CCA) method which enables mobile robots to cooperatively avoid collisions, by extending the concept of the Velocity Obstacle to multiple robot systems. The method introduced an evaluation function considering an operation objective so that each robot can choose the velocity which optimizes the function. As the evaluation function could be of an arbitrary type, this method is applicable to a wide variety of tasks. However, it complicates the optimization of the function especially in real-time. In addition, construction of the evaluation function requires an operation objective of the other robot which is very hard to obtain without communication. In this paper, the CCA method is improved considering such problems for implementation. To decrease computational costs, the previous method is simplified by introducing two essential assumptions. Then, by treating the desired direction of locomotion for each robot as the operation objective, an operation objective estimator which estimates the desired direction of the other robot is introduced. The only measurement required is the other robot's relative position, since the other information can be obtained through the estimation. Hence, communicational devices that are necessary for most other cooperative methods are not required. Moreover, mobile robots employing the method can avoid collisions with uncooperative robots or moving obstacles as well as with cooperative robots. Consequently, this improved method can be applied to general dynamic environments consisting of various mobile robots.

• 한국CDE학회논문집
• /
• 제14권1호
• /
• pp.60-68
• /
• 2009

Because of the reduced product life-cycle, industries are making an effort to bring down the process planning time. In the traditional approach, we have to analyze established process planning, then design the time chart based on process information and drawing the formal time chart such as SOP(sequence of operation). Thereafter, it will be converted to PLC code that is a time consuming and redundant job. Similarly, Industrial automated process uses PLC Code to control the factory; however, control information and control code(PLC code) are difficult to understand. Hence, industries prefer writing new control code instead of using the existing one. It shows the lack of information reusability in the existing process planning. As a result, to reduce this redundancy and lack of reusability, we propose SOS-Net modeling method. Unlike past stabilized process planning that is rigid to any change; our proposed SOS-Net modeling method is more adaptable to the new changes. The SOS-Net model is easy to understand and easy to convert into PLC Code accordingly. Therefore, we can easily modify the control information and reuse it for new process planning. The proposed model plays an intermediary role between process planning and PLC code generation. It can reduce the process planning and implementation time as well as cost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.94-97
• /
• 2002

A new small signal stability analysis method for eigenvalue analysis is presented. The method is based on the computation of the transition matrix over a specified time interval that corresponds to one cycle operation of the system The method is applicable to any system with or without nonlinear elements. An applicable example of RCF method is presented and the eigenvalues are compared with those of the conventional state space method to show the exactness of the computed eigenvalues of the new method. Also, the variations of oscillation modes which were caused by the switching operation can be analyzed exactly using RCF method.