• International Journal of Railway
• /
• 제5권2호
• /
• pp.84-88
• /
• 2012

Derailment due to wheel failure would cause a tremendous social and economical cost in service operation. It is necessary to evaluate quantitatively the safety with respect to high-speed train. Although the safety of railway wheel has been ensured by an regular inspection, all critical defects cannot be detected in inspection cycles and the wheel has been replaced because a defect quickly become critical for safety. Therefore, it is important to calculate quantitatively the fracture limit and remnant life of damaged railway wheel in wheel-rail system. In present paper, the critical crack size of wheel for high-speed train is simulated based on fracture scenario and the safety of wheel is evaluated.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(4)
• /
• pp.283-288
• /
• 1996

Core support barrel (CSB) assembly is one of the most important reactor internals structures supporting and protecting the nuclear core during normal operation and faulted events. For Yonggwang 3 and 4 (YGN 3&4), the adequacy of the analytical response prediction of reactor internals for flow induced vibration was demonstrated through the comprehensive vibration assessment program (CVAP) performed during hot functional test. Besides, the vibration characteristics of the CSB of operating nuclear power plant can be examined via the excore neutron noise monitoring signal. In this paper data from YGN 4 analyses, CVAP, and neutron noise monitoring system are compared and evaluated. In general, the results are comparable each other and conservative enough to ensure sufficient design margin and structural integrity. Further investigations on the modelling and analyses procedure are recommended to utilize the experimental results to the maximum extent. And collection of the neutron noise data is desired to serve as a baseline information.

• 제어로봇시스템학회논문지
• /
• 제19권10호
• /
• pp.873-878
• /
• 2013

An EOTS (Electro-Optical Tracking System) provides stabilized images while tracking a moving target. This paper presents a novel concept of driving the outer gimbal first for improving the maneuverability of an EOTS, contrary to the conventional inner gimbal mode. It has the advantages of faster positioning performance and stable operation in Nadir-point. Analysis of frequency responses reveal that the present scheme results in a wider control bandwidth and larger gain margin, compared to those of the previous one. The actual experimental results confirm that the maneuvering is stable although the input command has a large angular acceleration.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권2호
• /
• pp.110-116
• /
• 2004

We propose a novel sensing scheme, which operates by sensing the difference in voltage between a memory cell and a reference cell for a magneto-resistive random access memory (MRAM). A new midpoint-reference generation circuit is adopted for the reference cell to improve the sensing margin and to guarantee correct operation of sensing circuit for wide range of tunnel magneto resistance (TMR) voltages. In this scheme, the output voltage of the reference cell becomes nearly the midpoint between the cell voltages of high and low states even if the voltage across the magnetic tunnel junction (MTJ) varies.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.76-78
• /
• 2003

We have designed and tested an RSFQ (Rapid Single Flux Quantum) NDRO (Non Destructive Read Out) circuit for the development of a high speed superconducting ALU (Arithmetic Logic Unit). When designing the NDRO circuit, we used Julia, XIC and Lmeter for the circuit simulations and layouts. We obtained the simulation margins of larger than $\pm$25％. For the tests of NDRO operations, we attached the three DC/SFQ circuits and two SFQ/DC circuits to the NDRO circuit. In tests, we used an input frequency of 1 KHz to generate SFQ Pulses from DC/SFQ circuit. We measured the operation bias margin of NDRO to be $\pm$15％. The circuit was measured at the liquid helium temperature.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2946-2951
• /
• 2008

Combustion instability is a major issue in design of gas turbine combustors for efficient operation with low emissions. Combustion instability is induced by the interaction of the unsteady heat release of the combustion process and the change in the acoustic pressure in the combustion chamber. In an effort to develop a technique to predict self-excited combustion instability of gas turbine combustors, a new stability analysis method based on the transfer matrix method is developed. The method views the combustion system as a one-dimensional acoustic system with a side branch and describes the heat source as the input to the system. This approach makes it possible to use the advantages of not only the transfer matrix method but also well-established classic control theories. The approach is applied to a simple gas turbine combustion system to demonstrate the validity and effectiveness of the approach.

• 한국유체기계학회 논문집
• /
• 제12권2호
• /
• pp.31-38
• /
• 2009

The valve performance has been evaluated from the theoretical equation based on design information such as packing thrust, spring preload and friction coefficient(${\mu}$). The accuracy of those data can be lower than that of vendor's initial design data. Especially, the friction coefficient can be degraded with time than the original condition and the valve performance calculated using the previous friction coefficient can not be available. Accordingly, this paper is describing a new performance evaluation method of valve based on diagnostic test data which are acquired from a site valve tested in static and dynamic conditions. Especially, this paper provides a new method using friction coefficient(${\mu}$) which is derived from the diagnostic test data acquired in the valve's design basis condition.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.176-177
• /
• 2013

The composite PC rahmen structure, called Green Frame, allows the main structural members such as PC column and beam to be produced on the site, resulting in a reduction of PC member transportation cost and the margin of PC plant (operation cost and profit), making it more economic than the bearing wall structure. To apply the Green Frame to practice, not only installation but also insitu-production process should be considered. Therefore, this study analyse the influence factors on insitu-production and installation schedule of composite precast concrete members. The results shall be used as basic criteria on the planning of insitu-production and installation of Green Frame.

• Journal of Gastric Cancer
• /
• 제15권1호
• /
• pp.64-67
• /
• 2015

Inflammatory myofibroblastic tumors (IMTs) of the stomach are extremely rare in adults, and their oncologic prognosis is not well understood. We present a 28-year-old man with a proximal gastric IMT. The patient visited the emergency department of Yeouido St. Mary's Hospital with syncope and hematemesis. Hemoglobin levels were <5.5 g/dl. Gastric fibroscopy showed a protruding mass $4{\times}4cm$ in size, with central ulceration on the posterior wall of the fundus and diffuse wall thickening throughout the cardia and anterior wall of the upper body. Endoscopic biopsy revealed indeterminate spindle cells, along with inflammation. Given the risk of rebleeding, an operation was performed despite the uncertain diagnosis. Because the mass was circumferential, laparoscopic proximal gastrectomy and double-tract anastomosis were performed to ensure a safe resection margin. The pathological diagnosis was consistent with an IMT originating from the stomach, although the tumor was negative for anaplastic lymphoma kinase gene mutation.

• Journal of Power Electronics
• /
• 제6권3호
• /
• pp.253-263
• /
• 2006

A high performance and low cost single switch current fed energy recovery circuit (ERC) for an alternating current (AC) plasma display panel (PDP) is proposed. Since it is composed of only one power switch compared with the conventional circuit consisting of four power switches and two large energy recovery capacitors, the ERC features a simpler structure and lower cost. Furthermore, since all power switches can be switched under soft switching operating conditions, the proposed circuit has desirable merits such as increased reliability and low switching loss. Specifically, there are no serious voltage notches across the PDP with the aid of gas discharge current compensation, which can greatly reduce the current stress of all inverter switches, and provide those switches with the turn on timing margin. To confirm the validity of proposed circuit, its operation and performance were verified on a prototype for 7-inch test PDP.