• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.224-224
• /
• 2012

For decades, carbon fiber has expanded their application fields from reinforced composites to energy storage and transfer technologies such as electrodes for super-capacitors and lithium ion batteries and gas diffusion layers for proton exchange membrane fuel cell. Especially in fuel cell, water repellency of gas diffusion layer has become very important property for preventing flooding which is induced by condensed water could damage the fuel cell performance. In this work, we fabricated superhydrophobic network of carbon fiber with high aspect ratio hair-like nanostructure by preferential oxygen plasma etching. Superhydrophobic carbon fiber surfaces were achieved by hydrophobic material coating with a siloxane-based hydrocarbon film, which increased the water contact angle from $147^{\circ}$ to $163^{\circ}$ and decreased the contact angle hysteresis from $71^{\circ}$ to below $5^{\circ}$, sufficient to cause droplet roll-off from the surface in millimeter scale water droplet deposition test. Also, we have explored that the condensation behavior (nucleation and growth) of water droplet on the superhydrophobic carbon fiber were significantly retarded due to the high-aspect-ratio nanostructures under super-saturated vapor conditions. It is implied that superhydrophobic carbon fiber can provide a passage for vapor or gas flow in wet environments such as a gas diffusion layer requiring the effective water removal in the operation of proton exchange membrane fuel cell. Moreover, such nanostructuring of carbon-based materials can be extended to carbon fiber, carbon black or carbon films for applications as a cathode in lithium batteries or carbon fiber composites.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.1-10
• /
• 2001

Speech has a good characteristics of which car drivers busy to concern with miscellaneous operation can make use in convenient handling and manipulating of devices. By utilizing this, this works proposes a speaker verification method for protecting cars from being stolen and identifying a person trying to access critical on-line services. In this, continuant phonemes recognition which uses language information of speech and MLP(mult-layer perceptron) which has some advantages against previous stochastic methods are adopted. The recognition method, though, involves huge computation amount for learning, so it is somewhat difficult to adopt this in speaker verification application in which speakers should enroll themselves at real time. To relieve this problem, this works presents a solution that introduces speaker cohort models from speaker verification score normalization technique established before, dividing background speakers into small cohorts in advance. As a result, this enables computation burden to be reduced through classifying the enrolling speaker into one of those cohorts and going through enrollment for only that cohort.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.271-282
• /
• 2014

The recent flow of broadcasting technology, HDTV and 3DTV are being followed to develop UHDTV. UHDTV has established itself as the new paradigm. In Korea, the 4K-UHDTV experimental terrestrial broadcasting and cable and satellite TV services are being carried out in the present. 4K-UHD content creation workflow to enable a systematic formulation is needed. In this study, Through expert opinion 4K-UHD production workflow to derive the important topics and Hierarchical analysis methods (AHP, Analytic Hierarchy Process) is applied to 4K-UHD content creation is important to consider the items were compared to each other. The upper layer has a content creation workflow planning side, the media file management side and operational aspects of the selection and production equipment were classified. In the lower layer, UHD STAFF roles between production and training, media management, selection and operation of the storage device was evaluated in a relatively important. In addition, real-time 4K-UHD suggested workflow for production.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.393-404
• /
• 2007

A concept of multi-layered database is proposed for the integrated operation of bridge information in this study. The multi-layered database is a logically integrated database composed of standardized information layers. The standardized information layers represent the data sets that can be unified, and they are defined by standardized information models. Classification system of bridge component was used as a basis of the multi-layered database, and code system based on the classification system was employed as a key integrator to manipulate the distributed data located on the different information layers. In addition, data level indicating priorities of information layers was defined to support strategic planning of the multi-layered database construction. As a proof of concept, a prototype of multi-layered database for object-oriented 3-D shape information and structural calculation document was built. Data consistency check of the semantically same data in the two different information layer was demonstrated, It is expected that the proposed concept can assure the integrity and consistency of information in the bridge information management.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.38-45
• /
• 2018

An integrated cryptographic processor that efficiently integrates ARIA, AES block ciphers and Whirlpool hash function into a single hardware architecture is described. Based on the algorithm characteristics of ARIA, AES, and Whirlpool, we optimized the design so that the hardware resources of the substitution layer and the diffusion layer were shared. The round block was designed to operate in a time-division manner for the round transformation and the round key expansion of the Whirlpool hash, resulting in a lightweight hardware implementation. The hardware operation of the integrated ARIA-AES-Whirlpool crypto-processor was verified by Virtex5 FPGA implementation, and it occupied 68,531 gate equivalents (GEs) with a 0.18um CMOS cell library. When operating at 80 MHz clock frequency, it was estimated that the throughputs of ARIA, AES block ciphers, and Whirlpool hash were 602~787 Mbps, 682~930 Mbps, and 512 Mbps, respectively.

• Journal of Drive and Control
• /
• v.13 no.4
• /
• pp.14-22
• /
• 2016

This paper presents a stochastic and predictive working-risk-assessment algorithm for excavators based on a one-layer laser scanner. The one-layer laser scanner is employed to detect objects and to estimate an object's dynamic behaviors such as the position, velocity, heading angle, and heading rate. To estimate the state variables, extended and linear Kalman filters are applied in consideration of laser-scanner information as the measurements. The excavator's working area is derived based on a kinematic analysis of the excavator's working parts. With the estimated dynamic behaviors and the kinematic analysis of the excavator's working parts, an object's behavior and the excavator's working area such as the maximum, actual, and predicted areas are computed for a working risk assessment. The four working-risk levels are defined using the predicted behavior and the working area, and the intersection-area-based quantitative-risk level has been computed. An actual test-data-based performance evaluation of the designed stochastic and predictive risk-assessment algorithm is conducted using a typical working scenario. The results show that the algorithm can evaluate the working-risk levels of the excavator during its operation.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.979-984
• /
• 2001

As a preceding process for developing design technology and establishing operation technology, the design procedure of the SCR(Selective Catalytic Reduction) pilot plant that can handle $1,000Nm^{3}/hr$ of flue gas was reported in this paper. And we also considered several factors that might cause abnormality of the plant in the designing process. The plant was designed and fabricated to test the $DeNO_{x}$ performances in variable operating conditions in the range of $3,000{\sim}36,000hr^{-1}/hr$ in space velocities, $1.67{\sim}6\;m/s$ in linear velocities, $200{\sim}500^{\circ}C$ temperatures, $300{\sim}1,000Nm^{3}/hr$ flow rates, and $0{\sim}1.4:1\;NH_{3}/NO$ ratios. In order to maintain the flow uniformity, the guide vanes and flow straightener were designed and constructed in the plant. The SCR pilot plant can be operated by the automatic control system, which enable to obtain performance data in real time and to set up the operating technology. The catalyst reactor consists of 4 catalyst layers and surface area of each layer can be adjusted to be of small size. Arrangement of catalysts per layer is $3{\times}6$ with the catalyst dimensions of $150{\times}150{\times}500mm(L{\times}W{\times}H)$.

• Journal of Sensor Science and Technology
• /
• v.3 no.1
• /
• pp.5-11
• /
• 1994

This paper describes the characteristics of a piezoresistive pressure sensor fabricated on a SOI (Si-on-insulator) structure, in which the SOI structures of Si/$SiO_{2}$/Si and Si/$Al_{2}O_{3}$/Si were formed by SDB (Si-wafer direct bonding) technology and hetero-epitaxial growth, respectively. The SOI pressure sensors using the insulator of a SOI structure as the dielectrical isolation layer of piezoresistors, were operated at higher temperatures up to $300^{\circ}C$. In the case of pressure sensors using the insulator of a SOI structure as an etch-stop layer during the formation of thin Si diaphragms, the pressure sensitivity variation of the SOI pressure sensors was controlled to within a standard deviation of ${\pm}2.3%$ over 200 devices. Moreover, the pressure sensors fabricated on the double SOI ($Si/Al_{2}O_{3}/Si/SiO_{2}/Si$) structures formed by combining SDB technology with epitaxial growth also showed very excellent characteristics with high-temperature operation and high-resolution.

• The KIPS Transactions:PartB
• /
• v.13B no.4 s.107
• /
• pp.429-438
• /
• 2006

Neural Networks(NNs) are applied for solving a wide variety of nonlinear problems in several areas, such as image processing, pattern recognition etc. Although NN can be simulated by using software, many potential NN applications required real-time processing. Thus they need to be implemented as hardware. The hardware implementation of multi-layer perceptrons(MLPs) in several kind of NNs usually uses a fixed-point arithmetic due to a simple logic operation and a shorter processing time compared to the floating-point arithmetic. However, the fixed-point arithmetic-based MLP has a drawback which is not able to apply the MLP software that use floating-point arithmetic. We propose a design method for MLPs which has the floating-point arithmetic-based fully-pipelining architecture. It has a processing speed that is proportional to the number of the hidden nodes. The number of input and output nodes of MLPs are generally constrained by given problems, but the number of hidden nodes can be optimized by user experiences. Thus our design method is using optimized number of hidden nodes in order to improve the processing speed, especially in field of a repeated processing such as image processing, pattern recognition, etc.

• Archives of Plastic Surgery
• /
• v.33 no.5
• /
• pp.536-540
• /
• 2006

Purpose: The soft tissue injuries of the patellar area are difficult problems because of insufficient arterial blood supply and lack of muscle layer. There have been many methods for reconstructing the soft tissue injuries of the patellar area such as primary closure, skin graft, local flap and free tissue transfer. However, each method has some limitations in their application. After the first introduction, the fasciocutaneous flaps are widely used to reconstruct the soft tissue injuries. The saphenous nerve, one of the superficial sensory nerves in the lower leg, is supplied by the saphenous artery and its vascular network. We used the saphenous fasciocutaneous island flap to reconstruct the soft tissue injuries of the patellar area. Methods: From March 2002 to May 2005, we used the saphenous fasciocutaneous island flap to reconstruct the soft tissue injuries of the patellar area. The flap was elevated with saphenous nerve, saphenous vein and saphenous artery and its vascular network. The flap donor site was reconstructed with primary closure or split-thickness skin graft. Results: Five cases survived completely but 1 case developed partial necrosis of the skin on the upper margin of the flap. However, the necrosis was localized on skin layer, and we reconstructed with debridement and split-thickness skin graft only. After the operation, there was no contracture or gait disturbance in any patient. Conclusion: In conclusion, the saphenous fasciocutaneous island flap is safe, comfortable and effective method to reconstruct the soft tissue injuries of the patellar area.