• Geomechanics and Engineering
• /
• v.36 no.2
• /
• pp.131-143
• /
• 2024

Shield tunneling construction commonly crosses underground pipelines in urban areas, resulting in soil loss and followed deformation of grounds and pipelines nearby, which may threaten the safe operation of shield tunneling. This paper investigated the pipeline deformation caused by double curved shield tunnels in soil-rock composite stratum in Nanjing, China. The stratum settlement equation was modified to consider the double shield tunneling. Moreover, a three dimensional finite element model was established to explore the effects of hard-layer ratio, tunnel curvature radius, pipeline buried depth and other influencing factors. The results indicate the subsequent shield tunnel would cause secondary disturbance to the soil around the preceding tunnel, resulting in increased pipeline and ground surface settlement above the preceding tunnel. The settlement and stress of the pipeline increased gradually as buried depth of the pipeline increased or the hard-layer ratio (the ratio of hard-rock layer thickness to shield tunnel diameter within the range of the tunnel face) decreased. The modified settlement calculation equation was consistent with the measured data, which can be applied to the settlement calculation of ground surface and pipeline settlement. The modified coefficients a and b ranged from 0.45 to 0.95 and 0.90 to 1.25, respectively. Moreover, the hard-layer ratio had the most significant influence on the pipeline settlement, but the tunnel curvature radius and the included angle between pipeline and tunnel axis played a dominant role in the scope of the pipeline settlement deformation.

• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.5-9
• /
• 2013

Recently, eco-friendly sources of energy by fuel cells that use hydrogen as an energy source has emerged as the next generation of energy to solve the problem of environmental issues and exhaustion of energy. A solid oxide fuel cell(SOFC) classified based on the type of ion transfer mediator electrolyte has actively being researched. However, the reliability according to the thermal cycle is low during the operation of the fuel cell, and deformation problem comes from the difference in thermal expansion coefficient between the electrode material, the components made of ceramic material is also brittle, which means disadvantages in terms of the strength. Therefore, in this study, considering the states of the manufacturing and operating of SOFC single cells, the stress analyses in the each of the interfacial layer between the anode, electrolyte and the cathode were performed to get the basic data for reliability assessment of SOFC. The obtained results show that von Mises stress according to the thickness direction on operating state occurred maximum stress value in the electrolyte layer. And also the stresses inside the active area on a distance of 1 ${\mu}m$ from the electrode interface were estimated. Futhermore the evaluation was done for the variation of the stress according to the stage of the operation divided into three stages of manufacturing, stack, and operating.

• Journal of the Korean Ceramic Society
• /
• v.47 no.1
• /
• pp.75-81
• /
• 2010

The feasibility of using the thin film technology in utilizing lanthanum strontium manganite (LSM) for a solid oxide fuel cell (SOFC) cathode in a low-temperature regime is investigated in this study. Thin film LSM cathodes were fabricated using pulsed laser deposition (PLD) on anode-supported SOFCs with yttria-stabilized zirconia (YSZ) electrolytes. Although cells with a 1 ${\mu}m$-thick LSM cathode showed poor low-temperature cell performance compared to that of a cell with a bulk-processed cathode due to the lack of a triple-phase boundary length, the cell with 200 nm-thick gadolinia-doped ceria (GDC) inserted between the LSM and YSZ showed enhanced performance and more stable operation characteristics in a comparison of a cell without a GDC layer. We postulate that the GDC layer likely improved the cathode adhesion, therefore contributing to the improvement of the cell performance instead of serving as an interfacial reaction buffer.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.4
• /
• pp.1-10
• /
• 2015

NAND flash systems require deletion operation and do not support in-place update, so the storage systems should use Flash Translation Layer (FTL). However, there are a lot of memory consumptions using mapping table in the FTL, so recently, many studies have been proposed to resolve mapping table overhead. These studies try to solve update propagation problem in the nand flash system which does not use mapping table. In this paper, we present a novel index structure, called CL-Tree(Cache List Tree), to solve the update propagation problem. The proposed index structure reduces write operations which occur for an update propagation, and it has a good performance for search operation because it uses multi-list structure. In experimental evaluation, we show that our scheme yields about 173% and 179% improvement in insertion speed and search speed, respectively, compared to traditional B+tree and other works.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.2
• /
• pp.152-165
• /
• 1993

This study was performed at eleven small-sized plating factories located in Seoul, Incheon, Ansan, and Taejeon from July 21 to October 6, 1992. The major objectives of this study were to evaluate worker exposure to hexavalent chromium and local exhaust ventilation (L.E.V.) systems at the chromium plating operations. The most suitable L.E.V. systems for chromium plating tanks were designed as examples for recommendation to the industry. The results are summarized as follows. The range of chromium plating operations investigated included decorative, hard, and black chromium plating on several kinds of parts. Most of plating tanks were not equipped with proper control methods against emission of hexavalent chromium mists and workers were not wearing appropriate personal protectives. The ariborne hexavalent chromium concentrations showed an approximate lognormal distribution. The geometric means of both personal and area samples were within the Korean and ACGIH standards, $50{\mu}g/m^3$. However, in comparison with the NIOSH criterion, $1{\mu}g/m^3$, the geometric means of personal samples at two factories and the geometric means of area samples at two factories exceeded it. The geometric means of personal and area samples of high exposure groups (above the NIOSH criterion) were 7 and 27 times higher than those of low exposure groups (below the NIOSH criterion), respectively. The L.E.V. systems of high exposure groups were improperly designed, and the factory with the highest exposure level had no L.E.V. systems at all on chemical etching process. Whereas at factories of low exposure groups, mist control methods such as mist suppressants, tank cover, and/or auxillary L.E.V. systems were added to L.E.V systems. The evaluation of L.E.V. systems showed that there was no chromium plating operation satisfying the ACGIH criteria for capture velocity, slot velocity, and exhaust rate simultaneously. To increase performance of L.E.V. systems, it must be designed to minimize the impact of boundary layer separation. Push-pull ventilation hood and downward plenum ventilation hood were suggested for the Korean industry.

• Journal of Broadcast Engineering
• /
• v.2 no.1
• /
• pp.8-15
• /
• 1997

In this paper, a real-time operating Motion Picture Experts Group-1 (MPEG-1) audio encoder system is implemented using a TMS320C31 Digital Signal Processor (DSP) chip. The basic operation of the MPEG-1 audio encoder algorithm based on audio layer-2 and psychoacoustic model-1 is first verified by C-language. It is then realized using the Texas Instruments (Tl) assembly in order to reduce the overall execution time. Finally, the actual BSP circuit board for the encoder system is designed and implemented. In the system, the side-modules such as the analog-to-digital converter (ADC) control, the input/output (I/O) control, the bit-stream transmission from the DSP board to the PC and so on, are utilized with a field programmable gate array (FPGA) using very high speed hardware description language (VHDL) codes. The complete encoder system is able to process the stereo audio signal in real-time at the sampling frequency 48 kHz, and produces the encoded bit-stream with the bit-rate 192 kbps. The real-time operation capability of the encoder system and the good quality of the decoded sound are also confirmed using various types of actual stereo audio signals.

• Journal of Korean Society on Water Environment
• /
• v.18 no.3
• /
• pp.261-270
• /
• 2002

The artificial aeration in the middle and the small scale reservoirs is widely used to destroy the stratified layer and algal boom. This study has been conducted at the Youncho reservoir located in Keoje island since Jan. 2000 to suggest the most suitable control strategy of the artificial aeration and reduce the side effect. The main results obtained from this research are as follows. The starting time of aeration for destratification was adjusted from the end of March to the beginning of April when the natural stratification is started. In order to prevent an anoxic condition the artificial mixing should be started by the middle of April when the DO in hypolimnion is dropped to less than $5mg/{\ell}$. The decrease DO, caused by the increase in water temperature, spreads rapidly from hypolimnion to themocline. Thermal stratification disappeared after the onset of artificial aeration within 7 days in the Yuncho reservoir. The air diffusers decrease water temperature in the layer of epilimnion and thermocline, but rise it in hypolimnion. The continuous operation of air diffuser prevent the stratification and anoxic condition in hypolimnion despite of the rising of water temperature and algal abundance. The algal abundance is not observed in effective zone by aeration. The turbidity rising problem induced from the aeration is avoided by keeping an air diffuser about 1.5m high from the bottom of lake. During the summer season, ceasing the aeration should be decided carefully. And also, it is necessary to operate the system it considering weather and temperature, and depending on the number and the position of aerators.

• Archives of Reconstructive Microsurgery
• /
• v.22 no.1
• /
• pp.18-23
• /
• 2013

Purpose: For reconstruction of lower extremity defects, various flaps can be used and the appropriate flap must be selected and applied according to the size of the defect. In particular, in cases where the defect size is small to moderate, thinner or smaller volume flaps are useful. The authors performed reconstruction of small to moderate defects on the lower extremities using superficial circumflex iliac artery perforator free flaps and are reporting the results. Materials and Methods: Fifteen patients underwent reconstruction of defects on lower extremity areas using superficial circumflex iliac artery perforator free flaps from July 2011 to July 2012 at this hospital. The flaps were elevated from above the deep fat layer, and, in all cases, the vessel diameter of the flaps was less than 1mm, with the exception of superficial vein that accompanied it. Results: The mean follow up period was 4.46 months, and, despite a partial loss in the flap in two cases, there were no total losses. All donor sites were closed with primary closure, and there was no occurrence of complications, such as hematomas, seromas, or lymphorrheas. The patients were highly satisfied with the donor site scar since it could be masked by underwear. Conclusion: Compared to other flaps, superficial circumflex iliac artery perforator free flaps are thinner in thickness and smaller in volume, which results in a more natural contour of the recipient site after the operation. In addition, since the flap can be elevated from supra-deep fat layer, the operation time can be shortened, and lymphorrhea can be prevented, which in turn lessens donor-site morbidity.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.72-78
• /
• 2007

As a basic research fur the separation of effective components included in pyrolysis gas oil, the crystallization on each system of naphthalene with 2-methylnaphthalene, indene and 1-methylnaphthalene as impurity has been carried out in column and cold-finger type crystallizer, respectively. In crystallization operation, the purity of naphthalene has been a tendency of increase with decreasing of cooling rate and in the presence of impurity with lower melting point. In comparison of crystallizer types, naphthalene purity in column type crystallizer was a higher value than that in cold-finger type due to effective sweating operation after crystallization.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.3
• /
• pp.397-405
• /
• 1995

In order to operate the automatic devices of manufacturing process more efficiently and to solve the needs of the resource sharing,network technology is applied to the unit control devices located in common manufacturing zone and operated by connecting them.In this paper,functional standard of the network operation layer is set as MAP standard application layer of MMS(manufacturing message standard)for the cell or group,which is suggested by CIM (computer integrated manufacturing) standardization as common manufacturing zone.MMS is composed of abstract message which is not consider specific devices.Then,specific message standard must be defined to operate MMS.It is designed as VMD (virtual manufacturing device)objects which are abstract objects to perform group management based on the companion standard.Also they are operated in the group management model system.Group management operation takes multicast communication method which is the communication from single source to the multiple sinks, and the group management system and unit control devices are performed as VMD and real device mapping.