• Smart Structures and Systems
• /
• 제21권5호
• /
• pp.705-713
• /
• 2018

High-speed rail (HSR) has been in operation and development in many countries worldwide. The explosive growth of HSR has posed great challenges for operation safety and ride comfort. Among various technological demands on high-speed trains, vibration is an inevitable problem caused by rail/wheel imperfections, vehicle dynamics, and aerodynamic instability. Ride comfort is a key factor in evaluating the operational performance of high-speed trains. In this study, online monitoring data have been acquired from an in-service high-speed train for condition assessment. The measured dynamic response signals at the floor level of a train cabin are processed by the Sperling operator, in which the ride comfort index sequence is used to identify the train's operation condition. In addition, a novel technique that incorporates salient features of Bayesian inference and time series analysis is proposed for outlier detection and change detection. The Bayesian forecasting approach enables the prediction of conditional probabilities. By integrating the Bayesian forecasting approach with time series analysis, one-step forecasting probability density functions (PDFs) can be obtained before proceeding to the next observation. The change detection is conducted by comparing the current model and the alternative model (whose mean value is shifted by a prescribed offset) to determine which one can well fit the actual observation. When the comparison results indicate that the alternative model performs better, then a potential change is detected. If the current observation is a potential outlier or change, Bayes factor and cumulative Bayes factor are derived for further identification. A significant change, if identified, implies that there is a great alteration in the train operation performance due to defects. In this study, two illustrative cases are provided to demonstrate the performance of the proposed method for condition assessment of high-speed trains.

• 한국정보통신학회논문지
• /
• 제22권9호
• /
• pp.1257-1263
• /
• 2018

경량 사물인터넷 디바이스 상에서의 암호화 구현은 정확하고 빠르게 연산을 수행하여 서비스의 가용성을 높이는 것이 중요하다. 특히 곱셈 연산은 RSA, ECC, 그리고 SIDH와 같은 공개키 암호화에 활용되는 핵심 연산으로 최적화된 구현이 요구된다. 하지만 최신 저전력 프로세서인 ARM Cortex-M3 프로세서의 경우에는 곱셈연산 입력 크기에 따라 수행속도가 달라지는 보안 취약점을 가지고 있다. 수행속도가 달라지게 될 경우 연산 시간의 차이점을 확인하여 비밀정보를 추출하는 것이 가능하다. 이를 보완하기 위해 최근 연구에서는 고정된 연산 시간 안에 곱셈 연산을 수행하는 기법이 제안되었다. 하지만 해당 구현에서는 여전히 속도가 완전히 최적화되어 있지 않다. 본 논문에서는 기존에 제안된 곱셈연산을 보다 효율적으로 연산하기 위한 기법을 제안한다. 제안된 기법은 기존 방식에 비해 연산 속도를 최대 25.7% 향상시킨다.

• 한국실천공학교육학회논문지
• /
• 제4권2호
• /
• pp.110-115
• /
• 2012

IPP (Industry Professional Practice)는 학부교육(academic study)과 산업체 근무(industrial work)를 결합시킨 산학협력 교육모델로 학생들에게 학업과 현장업무를 교대로 경험하게 하여 실용교육의 효과를 극대화 시키고 또한 본인의 적성과 전공에 맞는 진로를 스스로 결정하도록 하여 궁극적으로는 대학 졸업생의 취업역량을 강화하고, 국가적으로는 청년실업 문제의 해소 및 대학과 산업체간의 인력수급 불일치 현상 등을 해소하기 위한 제도이다. 본 논문에서는 IPP 제도의 성공적인 운영을 위해 체계적이고 구체적으로 고려해야 할 학사-운영방안에 대해 검토하고 제안한다. 주요 내용은 학제개편(semester-based quarter제) 방안, 교과과정 개편방안, 학점인정(15학점) 및 성적평가 방안, 공학설계/졸업설계 운영방안, 산학연계 교과목 운영방안 및 경과조치 방안 등이다.

• 디지털산업정보학회논문지
• /
• 제7권2호
• /
• pp.173-183
• /
• 2011

The business is faced with the situation must improve a power in an increasingly competitive environment due to the recent rapid advance in information technology and the opening and expansion of global market, fast technological change, and various customer demand. The rapid change in information technology is having an effect on not only all the processes to develop products, but information contents that is provided for the purpose of customer value, and the appearance of products. In other words, the information technology is being recognized as a very important factor among other factors for companies to enhance their competitiveness. In addition, it is more efficient to focus on key factor to maintain the competitive advantage on the using of information technology by outsourcing information systems, rather than by operating the systems under their own. Since the global financial crisis, the long-term recession has been increasing companies who is ready to adopt outsourcing or adopted already. This study is to understand the environment and unique characteristics of outsourcing services and related industries focusing on information system operation and management in information outsourcing services, and is to set the concept needed through my theory that is connected to the service quality and customer satisfaction. A lot of business wiew the improvement of service quality and ensuring customer satisfaction as the major factors of business growth, and lots of ongoing studies have focused on service management in the Information outsourcing service industry. Yet few studies have ever concentrated on the quality of information system operation management service. This study, moreover, is to define the quality of service related with customer satisfaction from customer's viewpoint, measuring effects on customer satisfaction. The quality of outsourcing service on information system in this study is a great help to companies who are offering information outsourcing service, and company's managers and staffs who outsourcedto specialized company.

• 한국항공우주학회지
• /
• 제39권4호
• /
• pp.370-377
• /
• 2011

한국천문연구원은 2008년부터 수행중인 우주측지용 레이저 추적시스템 개발 사업과 관련하여 이동형 시스템인 ARGO-M 1기를 개발 중에 있다. ARGO-M을 구성하는 서브시스템 중 하나인 운영시스템은 실시간 레이저 거리 측정 시 제어 로직과 관측된 데이터로부터 정규점 추출을 위한 데이터 처리 과정이 핵심 요소이다. 이에 한국천문연구원의 운영시스템 팀은 오스트리아 Graz시에 위치한 SLR 관측소의 지원을 통해 소프트웨어 로직분석과 관련된 SLR 운영 기술에 대해 공동 연구를 수행하였다. 이 논문에서는 SLR의 운영에 필요한 알고리즘을 Graz 관측소에서 사용하는 방식을 기반으로 분석하고 정리하였다. 이러한 분석을 통해 SLR의 운용에 필수적인 로직과 관측 품질을 향상시킬 수 있는 방안을 파악하였다.

• Journal of Microbiology and Biotechnology
• /
• 제15권3호
• /
• pp.461-465
• /
• 2005

Characteristics of biological $CO_2$ fixation by Chlorella sp. HA-1 were investigated in a semi-continuous and series reactor system using an internally illuminated photobioreactor to overcome shortcomings of physicochemical technologies such as adsorption and membrane separation. High $CO_2$ fixation rate was achieved in the semi-continuous reactor system, in which the dilution ratios of the culture medium were controlled. The average $CO_2$ fixation rate was maintained almost constantly when the dilution ratio increased by 0.1 increment from the initial value of 0.5. The total removal efficiency of $CO_2$ was enhanced by employing a series reactor system. The average $CO_2$ fixation rate increased until 4.013 g $CO_2\;day^{-1}$ in a series operation of four reactors, compared to 0.986 g $CO_2\;day^{-1}$ in a batch operation mode. The total $CO_2$ fixation rate was proportional to the number of reactors used in the series reactor system. In the series reactor system of semi-continuous operation, a large amount of $CO_2$ was removed continuously for 30 days. These results showed that the present reactor systems are efficient and economically feasible for a biological $CO_2$ fixation.

• 한국건설관리학회논문집
• /
• 제14권5호
• /
• pp.153-163
• /
• 2013

건축물이 고층화, 대형화 될수록 수직 양중 계획 및 운영에 관한 중요성이 부각되고 있다. 이에 프로젝트 초기 단계에 실제 모델과 유사한 건설용 리프트 양중계획을 수립하려는 노력이 계속되고 있지만 프로젝트 착수 후 리프트 운행을 컨트롤 할 수 있는 시스템은 부재한 실정이다. 따라서 본 논문에서는 건설용 리프트 운영 효율증대를 위하여 센서를 사용한 리프트 운행 정보를 수집하고 실시간 분석이 가능한 건설용 리프트 최적화 운행 시스템 개발을 실시 및 검증 단계를 수행하여, 양중 효율의 지표가 되는 사용자 대기 시간의 단축을 도모하고 향후 무인 스마트 리프트의 초석이 되는 시스템을 제시하고자 한다.

• 한국압력기기공학회 논문집
• /
• 제6권2호
• /
• pp.28-33
• /
• 2010

As a part of license renewal for the continued operation of Wolsong unit 1, the periodic safety review report was submitted near the end of design lifetime, 2012, and now is under reviewing. Major components of primary system such as pressure tubes, feeder pipes and so on are being replaced and many components of secondary system are also being repaired. So the license renewal of Wolsong unit 1 is expected to be acquired without significant issues. But on the other hand, steam generators of Wolsong unit 1 had the good performance and therefore the replacement and repair for the steam generator are not needed. Recently it is reported that some cracks were detected in a few of european steam generator with Alloy 800 tubes and the cause of cracks was the outer diameter stress corrosion cracking(ODSCC) due to the concentration of chemical impurities on the outer surface of tube. Accordingly the overall review on this issue was performed. The long-term operation is likely to results to form the concentration mechanism for the tube corrosion as the sludge build-up in the secondary side of steam generator and the crack in the crevice between tube and tube-sheet and expansion transitions is apt to be occurred. In this paper, the history of steam generator inspection and operation of Wolsong unit 1 are reviewed and the reliability of steam generator tube is evaluated and the steam generator aging management program for Wolsong unit 1 is introduced.

• 대한두개안면성형외과학회지
• /
• 제13권1호
• /
• pp.41-45
• /
• 2012

Purpose: Fibular osteocutaneous free flap is the procedure of choice for mandibular reconstruction. However, the anatomic consistency and the reliability of the skin paddle have been considered to be questionable and the utilization of the fibular osteocutaneous free flap can be challenging for the inexperienced surgeon. Preoperative computed tomography (CT) angiography can support revolutionary help with the operator design of the fibular osteocutaneous flap. The purpose of this article is to share the valuable experience of support with preoperative CT angiography. Methods: Three consecutive patients, who needed mandibular reconstruction, were treated with fibular osteocutaneous free flap. Each of the patients had undergone lower extremity CT angiography before the surgery. The CT angiographies were scrupulously investigated to calculate the locations and the tracts of the peroneal artery perforators. We compared the findings of the CT angiography with those of the real operation. Results: The information about the perforators was sufficiently matched with the findings of the operation. With the use of preoperative CT angiography, we were able to achieve confident performance during operation, shortening of operation time, and fine outcomes with a no flap failure. Conclusion: The CT angiography of lower extremity can provide reliable information of the perforators of the fibular osteocutaneous free flap.

• 전기학회논문지
• /
• 제64권4호
• /
• pp.529-536
• /
• 2015

With the growing interest of microgrid all over the world, many studies on microgrid operation are being carried out. The battery energy storage system(BESS) is a key equipment for effective operation of the microgrid. In this paper, we analyze the characteristics of the charge and discharge output voltage of the battery and the characteristics of the life-span variation and the investment cost when the state-of-charge (SOC) changes. The formulas to represent the quality of the charge and discharge output voltage of the battery and the economics due to the life-span variation and the investment cost according to DOD(Depth of Discharge) are derived. The methodology of determining the proper operation ranges of the battery SOC with varying the weighting of the quality of its charge and discharge output voltage of the battery and the economics due to its life-span variation and the investment cost is presented using these formulas.