• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.786-792
• /
• 2016

Camellia was jointly developed by Nippon Telegraph and Telephone Corporation and Mitsubishi Electric Corporation in 2000. Camellia specifies the 128-bit message block size and 128-, 192-, and 256-bit key sizes. In this paper, a modified round operation block which unifies a register setting for key schedule and a conventional round operation block is proposed. 16 ROMs needed for key generation and round operation are implemented using only 4 dual-port ROMs. Due to the use of a message buffer, encryption/decryption can be executed without a waiting time immediately after KA and KB are calculated. The suggested block cipher Camellia algorithm is designed using Verilog-HDL, implemented on Virtex4 device and operates at 184.898MHz. The designed cryptographic core has a maximum throughput of 1.183Gbps in 128-bit key mode and that of 876.5Mbps in 192 and 256-bit key modes. The cryptographic core of this paper is applicable to security module of the areas such as smart card, internet banking, e-commerce and satellite broadcasting.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.496-500
• /
• 2001

When we cut a key way on the axial or on the boss, we generally use a slotter or a broach. To do the key seating, turing operations have to be preceded and then the key on the axial or on the boss can be seated. For this reason, the production process of key way cutting becomes complicated. If is necessary to simplify the process and we have developed a small practical machine for key way cutting. The machine is located on the carriage of the lathe. Using this small and practical key way machine, after operation the turing, you do not have to remove the workpiece from the chuck of the lathe to carry on the key seating process. The developed machine will save cutting time and the cost.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1247-1252
• /
• 2004

ATC(Automatic Train Control) system employed in Bundang urban transit is operated in accordance with automatic blocking equipment. Using AF(Audio Frequency) track circuits installed at a block section, the block signal is automatically controlled and the safety of train operation is supported. In this paper, we investigate the operation mode of bundang urban transit and analyze the operation algorithm of ATC on-board system.

• The Journal of Korean Association of Computer Education
• /
• v.9 no.2
• /
• pp.111-124
• /
• 2006

Multicast services are provided on the Internet in fast increasing. Therefore it is important to keep security for multicast communication. If a member of the group is removed, new group key has to be generated and distributed to all remaining members of group. Minimizing number of messages and operation cost for generation of the composite keys to be used to encrypting group key are important evaluating criteria of multicast key management scheme since generation and distribution of new keys for rekeying require expensive operation. Periodic batch rekeying can reduce these important parameters rather than rekeying sequentially in fashion one after another. In this paper, Hamming distance is calculated between every members to be removed. In batch rekeying the members with Hamming distance less than threshold are selected for rekeying procedure. With running the round assignment algorithm in the case of removing several members simultaneously, our scheme has advantages of reducing messages and operation cost for generation of the composite keys and eliminating possibility of collusion attack for rekeying. We evaluate performance of round assignment algorithm through simulation and show that our scheme is excellent after performance comparison of existent schemes and our scheme.

• Journal of Power Electronics
• /
• v.14 no.2
• /
• pp.249-256
• /
• 2014

A novel topology generation method for the no dead-time three-phase AC/DC converter is proposed in this study. With this method, a series of no dead time topologies are generated and their operation principles are analyzed. The classic three-phase bridge AC/DC converter can realize a bidirectional operation. However, dead-time should be inserted in the driving signals to avoid the shoot-through problem, which would cause additional harmonics. Compared with the bridge topology, the proposed topologies lack the shoot-through problem. Thus, dead time can be avoided. All of the no dead time three-phase AC/DC converters can realize bidirectional operation. The operating principles of the converters are analyzed in detail, and the corresponding control strategies are discussed. Comparisons of waveform distortion and efficiency among the converters are provided. Finally, 9 KW DSP-based principle prototypes are established and tested. Simulation and experimental results verify the theoretical analysis.

• Journal of the Optical Society of Korea
• /
• v.17 no.1
• /
• pp.5-9
• /
• 2013

We report on high-power continuous-wave operations of an Er:YAG ceramic laser in-band pumped by a cladding-pumped Er,Yb fiber laser at 1532 nm. With an output coupler of 10% transmission, the ceramic laser yielded 16.7 W of continuous-wave output at 1645 nm for 28.8 W of incident pump power, corresponding to a slope efficiency of 61.0% with respect to the incident pump power. The lasing wavelength switched to 1617 nm when output couplers of > 20% transmission were used. Up to 16.2 W of 1617 nm output was generated for 33.0 W of incident pump power, corresponding to a slope efficiency of 51.8%. Graphene Q-switched operation of Er:YAG cermic laser at 1645 nm was also demonstrated with stable pulses of 30-74 kHz repetition rates and 1.5-6.4 ${\mu}s$ pulse widths.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2840-2851
• /
• 2022

Electric boilers (EBs) are the backup steam source for the auxiliary steam system of high-temperature gas-cooled reactor nuclear power plants. When the plant is in normal operations, the EB is always in hot standby status. However, the current hot standby operation strategy has problems of slow response, high power consumption, and long operation time. To solve these problems, this study focuses on the optimization of hot standby operations for the EB system. First, mathematical models of an electrode immersion EB and its accompanying deaerator were established. Then, a control simulation platform of the EB system was developed in MATLAB/Simulink implementing the established mathematical models and corresponding control systems. Finally, two optimization strategies for the EB hot standby operation were proposed, followed by dynamic simulations of the EB system transient from hot standby to normal operations. The results indicate that the proposed optimization strategies can significantly speed up the transient response of the EB system from hot standby to normal operations and reduce the power consumption in hot standby operations, improving the dynamic performance and economy of the system.

• Research in Mathematical Education
• /
• v.11 no.4
• /
• pp.247-263
• /
• 2007

Problem solving takes place not only in mathematics classes but also in real-world. For this reason, a problem and the structure of problem solving, and the enhancing of success in problem solving is a subject which has been studied by any educators. In this direction, the aim of this study is that the strategy used by students in Turkey when solving oral problems and their achievements of choosing operations when solving oral problems has been researched. In the research, the students have been asked three types of questions made up groups of 5. In the first category, S-problems (standard problems not requiring to determine any strategy but can be easily solved with only the applications of arithmetical operations), in the second category, AS-SA problems (problems that can be solved with the key word of additive operation despite to its being a subtractive operation, and containing the key word of subtractive operation despite to its being an additive operation), and in the third category P-problems (problematic problem) take place. It is seen that students did not have so much difficulty in S-problems, mistakes were made in determining operations for problem solving because of memorizing certain essential concepts, and the succession rate of students is very low in P-problems. The reasons of these mistakes as a summary are given below: $\cdot$ Because of memorizing some certain key concepts about operations mistakes have been done in choosing operations. $\cdot$ Not giving place to problems which has no solution and with incomplete information in mathematics. $\cdot$ Thinking of students that every problem has a solution since they don't encounter every type of problems in mathematics classes and course books.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1377-1379
• /
• 2003

Satellite and aerial remote sensing (RS) techniques have been provided to collect spatial data globally over the last few decades. However in developing countries such as China, there is still an urgent need for low cost and high resolution RS data. As an emerging RS platform, commercial Unmanned Aerial Vehicle (UAV) integrated with state-of-the-art sensors and information technologies has the potential to become a low cost tool to meet application demands. In this paper, the architecture of UAV RS operation system is mentioned. Moreover, key technologies in UAV RS system are analyzed and current work is reported.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.345-348
• /
• 2002

This paper presents new fast scalar multiplier of elliptic curve cryptosystem that is regarded as next generation public-key crypto processor. For fast operation of scalar multiplication a finite field multiplier is designed with LFSR type of bit serial structure and a finite field inversion operator uses extended binary euclidean algorithm for reducing one multiplying operation on point operation. Also the use of the window non-adjacent form (WNAF) method can reduce addition operation of each other different points.