• Nuclear Engineering and Technology
• /
• v.31 no.3
• /
• pp.267-275
• /
• 1999

This paper deals with the industrial problem of thermal striping damage on the French prototype fast breeder reactor, Phenix and it was studied in coordination with the research program of IAEA. The thermomechanical and fracture mechanics evaluation procedure of thermal striping damage on the tee-junction of the secondary piping using Green's function method and standard FEM is presented. The thermohydraulic(T/H) loading condition used in the present analysis is the random type thermal loads computed by T/H analysis on the turbulent mixing of the two flows with different temperatures. The thermomechanical fatigue damage was evaluated according to ASME code section 111 subsection NH. The results of the fatigue analysis showed that fatigue failure would occur at the welded joint within 90,000 hours of operation. The assessment for the fracture behavior of the welded joint showed that the crack would be initiated at an early stage in the operation. It took 42,698.9 hours for the crack to propagate up to 5 mm along the thickness direction. After then, however, the instability analysis, using tearing modulus, showed that the crack would be arrested, which was in agreement with the actual observation of the crack. An efficient analysis procedure using Green's function approach for the crack propagation problem under random type load was proposed in this study. The analysis results showed good agreement with those of the practical observations.

• Tunnel and Underground Space
• /
• v.14 no.4
• /
• pp.287-294
• /
• 2004

To predict the temperature distribution around a underground rock storage cavern, two- and three- dimensional numerical analysis using FLAC was conducted. The effects of groundwater and latent heat on thermal properties were considered in numerical calculation. The temperature estimated by FLAC are compared with the temperature measured for 5-year operation at Gonjiam storage cavern. Estimated and measured temperatures showed great discrepancy when thermal properties from laboratory tests were used and showed good agreement when the effects from 20% of volumetric water fraction and latent heat were considered. However, the discrepancy still increased with operation time due to the heat flow from ground surface. Three-dimensional numerical models were established to closely approximate the boundary condition of the test site, and numerical results better agreement when groundwater and latent heat effects were considered.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.10
• /
• pp.13-23
• /
• 2018

"Special Act on the Rocal Collaborative Development", proposed by Seoul in late 2015, aims to promote win-win cooperation between local economic players and the development of local communities. However, since it is not possible to ensure its effectiveness by signing a local collaborative agreement, the rights and duties granted to the Parties to the Convention shall be more clearly defined. In addition, it is feared that the application of a uniform standard to businesses that wish to restrict the operation within the local collaborative development zone could prevent the operation restriction based on local characteristics. Accordingly, based on the FBR system in the U.S., it is possible to define the business as a "uniform store" and to determine the possibility of a uniform store to be sold through zoning plans in the region by the Local Collaborative Community Council.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.57
• /
• pp.283-303
• /
• 2013

When a trade conflict arises related to an officially supported export credit programme, The World Trade Organization(WTO), decides on whether the programme is a forbidden subsidy stipulated in the Agreement on Subsidies and Countervailing Measures(the ASCM Agreement). Korea was taken to the WTO panel two times for the export credit programme. One is the semiconductor case in 2002 and the other was the shipbuilding disputes in 2004. And, In 2012, the U.S. Commerce Department ruled K-SURE's export insurance for Korean refrigerator manufacturers as a forbidden subsidy even if the case was not taken to the WTO. This paper examines the significance of export credit programmes on the WTO ASCM Agreement and discusses how to operate these programmes so they would not infringe upon the Agreement by analyzing the actual cases of WTO subsidy conflicts that involved Korean enterprises in relation to export credit programmes for the purpose of determining the related issues and impacts. From this research the results were as follows: First, on whether export credit is a prohibited subsidy, the deciding factor was whether a benefit has been conferred to the beneficiary. On the presence of a benefit, the WTO panel used market benchmarks as the main criteria. Thus, official export credit agencies(ECAs) should be careful not to provide export credit support which had been granted to the beneficiary at better than market terms. Second, in the case of export credit, the special status of ECA as a public body receiving government support itself does not constitute a subsidy. However, caution must be taken not to provide export credit that may lead to WTO ASCM subsidy conflicts involving a certain exporter or industry by setting up clear and valid regulations and fair work processes in the operation of export credit programmes. Third, item (j) of Annex I cannot be interpreted reversely as this item is for interpreting the presence of a prohibited subsidy, not the presence of a benefit. Thus, an export credit program that confers a financial contribution, a benefit and specificity, could qualify as a prohibited subsidy. Fourth, ECAs not only have to maintain long-term account balance but also introduce additional measures to meet this long-term balance such as a clear and systematic premium system. Finally, export credit programmes that are not defined in item (j) of Annex I of the ASCM Agreement would not deemed as an prohibited export subsidy as long as the continued support of the programmes are not being forced.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.423-426
• /
• 2005

Numerical analysis of a gaseous jet injected into a closed nozzle was carried out considering the valve operation to simulate the interior pressure development of closed nozzle. Pressure data was obtained through valve operation and we compared numerical analysis with experiment data. Commercial code was used for the present calculation. Numerical results of a pressure development since its start showed good agreement for experiment data of the nozzle operation.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.8
• /
• pp.289-298
• /
• 1984

The single phase induction motor is recently requested to meet a broad speed control and smooth forward and reverse operation due to the multifarious usages. This paper deals with two phase operation of a two winding motor by reference current adaptive inverter which can supply the currents to satisfy the balanced oeration into the main and auxiliary winding through the entire operational region. According to the roposed system, the starting, forward and reverse and variable speed control of a two winding motor eliminated the capacitor from the capacitor-run motor is also possible. The formation and its principle of the reference current adaptive inverter and characteristic analysis of the motor fed by this apparatus are described in this paper. Excellent agreement with the measured results and calculated values by computer simulation is obtained.

• Journal of electromagnetic engineering and science
• /
• v.18 no.3
• /
• pp.182-187
• /
• 2018

A low profile asymmetrical fractal boundary patch antenna based on reactive impedance surface (RIS) and a mushroom unit cell (MUC) is proposed and studied for dual band operation. The sides of the square patch antenna are replaced with asymmetrical half circled fractal curves for circular polarization operation at patch mode band. The fractal patch antenna is loaded with MUC for dual band operation. The antenna radiation characteristics are investigated and illustrated with both simulated and experimental results in detail. The 10-dB return loss bandwidth are 8.48% (3.21-3.49 GHz) and 2.59% (2.30-2.36 GHz) at upper and lower resonance frequencies, respectively. The 3-dB axial ratio bandwidth is 4.26% (3.21-3.35 GHz). A close agreement between simulation data with experimental results is observed.

• Journal of information and communication convergence engineering
• /
• v.14 no.2
• /
• pp.65-70
• /
• 2016

This paper proposes and experimentally tests a modified circular slot antenna fed by a fork-like tuning stub for ultra-wideband (UWB) operation. The proposed antenna consists of a modified circular slot model and fork-like tuning stub. The proposed antenna is printed on a 34.0 mm × 30.0 mm FR4 substrate with thickness of 1.0 mm and relative permittivity of 4.4. The effect of various parameters of the circular slot and fork-like tuning stub is investigated for UWB operation. The modified circular slot and fork-like tuning stub are fabricated on the substrate to achieve wideband operation and good impedance matching. Experimental results demonstrated that the measured return loss exhibits an acceptable agreement with the simulated return loss and satisfies the -10 dB impedance bandwidth requirement while simultaneously covering the UWB bands. In addition, the proposed antenna shows good radiation characteristics and gains in the UWB bands.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2268-2278
• /
• 1992

The vibratory modal for the face milling operation is assumed as a multi degrees of freedom system. The parameters of the system are determined based on the cutting experiment. From the relative displacements of this system the dynamic cutting forces were derived and simulated by the double modulation principle. The simulated cutting forces and measured cutting forces have a good agreement in time and frequency domains.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.3
• /
• pp.200-203
• /
• 2012

Objective : The sub-axial injury classification (SLIC) and severity scale was developed to decide whether to operate the cervical injured patient or not, but the reliability of SLIC and severity scale among the different physicians was not well known. Therefore, we evaluated the reliability of SLIC among a spine surgeon, a resident of neurosurgery and a neuro-radiologist. Methods : In retrograde review in single hospital from 2002 to 2009 years, 75 cases of sub-axial spine injured patients underwent operation. Each case was blindly reviewed for the SLIC and severity scale by 3 different observers by two times with 4 weeks interval with randomly allocated. The compared axis was the injury morphology score, the disco-ligamentous complex score, the neurological status score and total SLIC score; the neurological status score was derived from the review of medical record. The kappa value was used for the statistical analysis. Results : Interobserver agreement of SLIC and severity scale was substantial agreement in the score of injury morphology [intraclass correlation (ICC)=0.603] and total SLIC and severity sacle (ICC value=0.775), but was fair agreement in the disco-ligamentous complex score (ICC value= 0.304). Intraobserver agreements were almost perfect agreement in whole scales with ICC of 0.974 in a spine surgeon, 0.948 in a resident of neurosurgery, and 0.963 in a neuro-radiologist. Conclusion : The SLIC and severity scale is comprehensive and easily applicable tool in spine injured patient. Moreover, it is very useful tool to communicate among spine surgeons, residents of neurosurgery and neuro-radiologists with sufficient reproducibility.