• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1407-1414
• /
• 2012

Hormone replacement therapy (HRT) is an effective regimen that has been found to prevent these diseases in postmenopausal women. However, HRT is accompanied by an increased risk of unfavorable outcomes. This study was conducted to evaluate the effects of Eisenia Bicyclis extract on lipids in ovariectomized rats. Fifty 7-week-old female Sprague-Dawley rats were randomly assigned to four groups: sham-operated rats (SHAM), ovariectomized rats (OVX-CON), and ovariectomized rats that were treated with Eisenia bicyclis extracts. The extract-treated diets were fed to the rats for 6 weeks after operation. Antioxidant effects were measured by DPPH free radical scavenging activity. Antioxidant activity of the ethanol extract increased in a dose-dependent manner and was about 55.9% in a concentration of 100 ${\mu}g/ml$. We measured the total cholesterol content, triglyceride content, HDL-cholesterol content, LDL-cholesterol content, atherosclerotic index, cardiac risk factor in serum, and anti-platelet aggregation and blood rheology. The total cholesterol and triglyceride concentration in serum increased for the OVX-control group, but supplementation with the E. bicyclis extract caused these factors to decrease. Notably, the serum LDL-cholesterol concentration in the OVX-EB200 group was significantly lower than the OVX-CON group. In addition, the blood passage times in rats that received the E. bicyclis extract were more rapid than the times in the untreated group (OVX-CON). Microscopic evaluation revealed that whole blood passed more smoothly through the microchannels in rats in the E. bicyclis extract supplement groups. Our results clarified the effects of E. bicyclis extract on serum lipid content in ovariectomized rats, and consequently we expect positive effects from providing E. bicyclis extract to postmenopausal women with cardiovascular disease.

• Tuberculosis and Respiratory Diseases
• /
• v.54 no.6
• /
• pp.610-620
• /
• 2003

Background : 3p deletion has been shown to be the most frequently occurring change in lung cancers, suggesting the presence of a tumor suppressor gene in this region. Recent attention has focused on a candidate 3p14.2 tumor suppressor gene, FHIT. Therefore, the association of the expression of FHIT, with apoptosis, cell proliferation cycle and the clinicopathological features, including survival, were investigated Materials and Methods : 83 patients with non-small cell lung cancer, who underwent curative operation, between Jan. 1996 and Aug. 2000, at the Wonkwang university hospital, were analyzed. The expression of the FHIT was identified by immunohistochemical staining, and rate of apoptosis and cell proliferation cycle by flow cytometry. Results : 43% (36/83) of patients exhibited no FHIT expression. The rates of FHIT loss were 52% (28/54), 22% (5/23), 50% (3/6); 30% (11/37), 48% (16/33), 69% (9/13); 54% (30/56) and 22% (6/27), in squamous cell cancers, adenocarcinomas, large cell cancers, TNM stages I, II and III, smokers and non-smokers, respectively. All the differences in FHIT loss rates, according to the histopathology, TNM stages and smoking habits, were statistically significant. The median survival time and 2-year survival rate of the FHIT(-) group were 24 months and 44%, and those of the FHIT(+) group were 25 months and 51% (p>0.05), respectively. The apoptotic rate of the FHIT(-) and FHIT(+) groups were 50.72 (${\pm}13.93$) and 59.38 (${\pm}14.33$)%, respectively (p=0.01). The S- and G1-phase fractions of the FHIT(-) and FHIT(+) groups were 13.93 (${\pm}7.35$) and $51.50({\pm}23.15$)% and 15.65(${\pm}6.59$) and 54.16 (${\pm}20.25$)%, respectively (p>0.05). Conclusion : The loss of FHIT expression was increased to a greater extent with advancing TNM stage, smoking habits and squamous cell cancer compared to the adenocarcinomas. However, no survival differences were found according to the expression of FHIT. The apoptotic rate of the FHIT(+) group was greater than in the FHIT(-) group, but differences in the S- and G1-phase fractions, according to the expression of the FHIT, were not found.

• Journal of Gastric Cancer
• /
• v.6 no.4
• /
• pp.257-262
• /
• 2006

Purpose: We analyzed the clinicopathologic features, including treatment and outcome, and the survival rates between young and elderly patients with gastric cancer. Materials and Methods: Clinical information was reviewed for 1086 patients who had undergone a gastrectomy for gastric cancer during a 10-year period from 1990 to 1999, and the patients were assigned to one of two groups: the A group (<40 years of age, 91 patients) and the B group (${\geq}70\;years\;of\;age,\;85\;patients)$). Results: Compared to the B group, the A group had more females (47.3% vs 32.9%), a greater frequency of family history of cancer (15.4% vs 3.5%), and greater proportions of histologically poorly differentiated tumors (84.5% vs 40.2%) and Lauren diffuse-type tumors (69.1% vs 35.1%)(P<0.05). There was no difference in TNM stage. Cardiopulmonary co-morbidities were more in the B group, respectively, 1.1% (A group) and 11.8% (B group)(P<0.01), but the morbidity and the mortality were similar. Although there was no difference in curability, the B group underwent less aggressive operations in lymph-node dissection above D3 and had a shorter operation time, a smaller number of retrieved lymph nodes, and less adjuvant chemotherapy (P<0.001). However, there were no differences in the disease-specific 5-year survival rates, 67.6% and 67.0% respectively. Conclusion: Young and elderly patients with gastric cancer had different clinicopathological features. Especially, elderly patients underwent relatively less aggressive treatment. In spite of these facts, the outcome of treatment and the disease-specific survival rates were not different.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.1
• /
• pp.120-128
• /
• 2018

The purpose of this study is to establish basic data for the continuous protection management policy of domestic natural world heritage and mixed world heritage, and to examine the present situation and characteristics of the protection management according to the World Heritage Convention on the World Heritage listed Huangshan. The results of this study are as follows. First, Huangshan began to be protected by the establishment of the Huangshan Construction Committee in 1933, and after the designation of national park in 1982, laws and regulations were established in the central ministries, And various projects related to utilization have been implemented. Secondly, the establishment of the boundary for protection was actively intervened by the central government, such as the reorganization of the boundary of Huangshan through the administrative district plan. In order to protect the ecological and landscape value as well as the cultural factor, And designated a heritage designated area. Third, the protection management of Huangshan was divided into four major stages. The first phase was divided into the period when administrative measures were taken to manage the protection of Huangshan. The second phase was designated as a national park in Huangshan. The third period was the time of the protection-oriented project according to the recommendation of the international organizations after the World Heritage listed. The fourth period was the expansion of the tourism industry for the continuous use of protection of Huangshan city, My preservation business was being implemented. Fourth, Huangshan is managed by the central government and the city government. Huangshan, which is a mixed heritage, is managed jointly by the Ministry of Cultural Heritage Administration and the Ministry of Natural Heritage Administration. The protection and management of Huangshan promoted the efficiency and expertise of the heritage-related work through the establishment of the administrative unit-specific management system, and the local governments were entrusted with the authority to implement the protection management policies that meet local characteristics. Fifth, the preservation area of Huangshan has been destroyed by the development policy centered on the mountain. In addition, according to the operation of accommodation facilities, there are problems such as sewage, garbage disposal, and environmental pollution caused by tourists, and the damage caused by pests and diseases in planted plantations around the area and changes in ecosystem due to the composition of cable cars. Sixth, for the continuous protection of Huangshan, strict regulations on new construction, extension and management of accommodation are required, and it is necessary to install facilities to limit and control the number of visitors.

• Clinics in Shoulder and Elbow
• /
• v.12 no.1
• /
• pp.53-60
• /
• 2009

Purpose: Primary osteoarthritis on the elbow is the result of the growth of osteophytes and contracture of the capsule. It often causes disability on joint motion and pain while exercising. As arthroscopy has developed, the arthroscopic diagnosis and treatment of the elbow have recently become more generalized as well. Therefore, we like to report on arthroscopy for treating elbow arthritis and its results. Materials and Methods: This study includes 23 cases of elbow arthritis that were seen between 2005 June to 2007 June and these patients didn't response to conservative treatment. From this we excluded 18 cases that underwent arthroscopic surgery and among these 18 cases, 6 cases underwent ulnar nerve transfer. The average observation time was 21.3 months and the average age was 48.4 years (range: 22-66 years). The pre and post operative pain was evaluated with using the Visual Analogue Scale (VAS) and functional evaluation was done with using the Mayo elbow Performance Score (MEPS) with the range of joint motion. Results: The VAS score at the last follow up was significantly decreased from 3.4 to 1.9 compare to the preoperative score. The range of joint motion was improved by 25 (0-40) to 8.5 (0-20) in extension and 101.7 (80-140) to 125.2 (85-140) in flexion (p<0.05). The MEPS always showed significant improvement by showing an increase from 65.4 (40-85) to 87.9 (55-100). However, 3 cases showed a decreased range of motion after the operation. One case showed ulnar nerve symptoms after surgery. Conclusion: An arthroscopic procedure can treat the pathologic processes associated with arthritis of the elbow and it was safe and effective in this series.

• Korean Journal of Community Nutrition
• /
• v.9 no.2
• /
• pp.191-203
• /
• 2004

This study was performed to compare the foodservice management practices in the employee feeding operations of Jeonnam and Chungchong area. Questionnaires were developed and mailed to 160 dietitians with management in employee foodservice of Jeonnam and Chungchong area. Completed questionnaires were received from 124 dietitians with a response rate of 77.5%. The results of this study can be summarized as follows:. Age, work experience, concurrent position and work time of dietitians were significantly higher in the Chungchong area than those in the Jeonnam area. Times of meals and amount of meals served per day in the Chungchong area were significantly higher than those in the Jeonnam area. The type of menu by foodservice operation was high non-selective menu in both areas, especially non-selective menu was high in self-operated place whereas selective menu was high in contract management. Period of cycle menu was 10-15 days in Jeonnam area, but that was 7 days in Chungchong area and so cycle menu of both areas was significantly different (p ＜ 0.001). Most considerable factor in menu planning was preference in Jeonnam area and was cost in the Chungchong area. Food purchasing method was used mostly by automatic computerized order in the Jeonnam area whereas telephone or mail order was high in the Chungchong area.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.4
• /
• pp.341-348
• /
• 2010

The basic principle of fry drying process of sludge lies in the rapid pressure change of sludge material caused by the change of temperature between oil and moisture due to the difference of specific heat. Therefore, the rapid increase of pressure in drying sludge induces the efficient moisture escape through sludge pores toward heating oil media. The object of this study is to carry out a systematic investigation of the influence of various parameters associated with the sludge fry drying processes on the drying efficiency. To this end, a series of parametric experimental investigation has been made together with the numerical calculation in order to obtain typical drying curves as function of important parameters such as drying temperature, sludge diameter, oil type and sludge type. In the aspect of frying temperature, especially it is found that the operation higher than $140^{\circ}C$ was favorable in drying efficiency regardless of type of waste oil employed in this study. The same result was also noted consistently in the investigation of numerical calculation, that is, in that the sludge particle drying was efficiently made over $140^{\circ}C$ irrespective of the change of particle diameter. As expected, in general, the decrease of diameter in sludge was found efficient both experiment and numerical calculation in drying due to the increased surface area per unit volume. In the investigation of oil type and property, the effect of the viscosity of waste oil was found to be more influential in drying performance. In particular, when the oil with high viscosity, a visible time delay was noticed in moisture evaporation especially in the early stage of drying. However, the effect of high viscosity decreased significantly over the temperature of $140^{\circ}C$. There was no visible difference observed in the study of sludge type but the sewage sludge with a slightly better efficiency. The numerical study is considered to be a quite useful tool to assist in experiment with more detailed empirical modeling as further work.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.51-57
• /
• 2009

Biofouling in seawater reverse osmosis (SWRO) desalination process causes many problems such as flux decline, biodegradation of membrane, increased cleaning time, and increased energy consumption and operational cost. Therefore biofouling is considered as the most critical problem in system operation. To control biofouling in early stage, detection of the most problematic bacteria causing biofouling is required. In this study, six model bacteria were chosen; Bacillus sp., Flavobacterium sp., Mycobacterium sp., Pseudomonas aeruginosa, Pseudomonas fluorescens, and Rhodobacter sp. based on report in the literature and phylogenetic analysis of seawater intake and fouled RO membrane. The adhesion to RO membrane, the high pressure resistance, and the hydrophobicity of the six model bacteria were examined to find out their fouling potential. Rhodobacter sp. and Mycobacterium sp. were found to attach very well to RO membrane surface compared to others used in this study. The test of hydrophobicity revealed that the bacteria which have high hydrophobicity or similar contact angle with RO membrane ($63^{\circ}$ of contact angle) easily attached to RO membrane surface. P. aeruginosa which is highly hydrophilic ($23.07^{\circ}$ of contact angle) showed the least adhesion characteristic among six model bacteria. After applying a pressure of 800 psi to the sample, Rhodobacter sp. was found to show the highest reduction rate; with 59-73% of the cells removed from the membrane under pressure. P. fluorescens on the other hand analyzed as the most pressure resistant bacteria among six model bacteria. The difference between reduction rates using direct counting and plate counting indicates that the viability of each model bacteria was affected significantly from the high pressure. Most cells subjected to high pressure were unable to form colonies even thought they maintained their structural integrity.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Journal of Chest Surgery
• /
• v.19 no.1
• /
• pp.35-42
• /
• 1986

Prevention of thrombombolism after rosthetic cardiac valve replacement is essential for the patients. About 90% of patients are free of major and minor thromboembolic complications 5 year after replacement of cardiac valves with prosthetic devices when they are under control of anticoagulant therapy. Ticlopidine is a drug that alter platelet function to have an antithrombotic effect. It is an antiaggregating agent which inhibits primary platelet function to have an antithrombotic effect. It is an antiaggregating agent which inhibits primary platelet aggregation induced by ADP and increases the production of prostaglandin $D_{2}$. Aspirin in small doses inhibits platelet synthesis of prostaglandins by irreversibly blocking the enzyme cyclo-oxygenase. Platelet secretion and aggregation are impaired with Ticlopidine and Aspirin. the thromboembolic event sof 54 patient s who were treated with Ticlopidine and Aspirin after cardiac valve replacement were evaluated and compared with that of 79 patients who were treated with Wafarin and Aspirin after the same type of operation. The follow-up period ranged from 4 to 110 months (mean of 48 months). there were 11 major thromboembolic episodes including three deaths in the warfarin goup during mean follow-up period of 56 months. two cases of CVA and one hemoarthrosis were noted due to overdose of Warfarin. Inticlopidine group, there was only one fatal thromboembolic epdisode three month after mitral valve replacement during mean follow-up period of 18 months. Two episodes of hypermenorrhea resulting anemia ere noted in the ticlopidine group. We measured the parameters of platelet function in aggreagation curve of platelet with platelet aggregometer (chrono-log Aggregometer, Model No. 430) Aggregation test was performed with three final concentrations of epinephrine in 10 uM/L, ADP in 5uM/L. 28 patients with prosthetic cardiac valves and 35 healthy volunteers were subgrouped as follows to analyze the effect of antithrombotic drugs used. Group I ; 11 patients treated with 250-500 mg of ticlopidine and 0.5gm of Aspirin as a daily single dose after cardiac valve replacement (14 St. Jude Medical and 1 Carpentier-Edwards, 9 patients with atrial fibrillation among them) Group II ; 10 patients treated with 3-5 mg of Warfarin and 0.75 gm of Aspirin daily to prolong prothrombin time around 20 seconds for more than 6 months and single Aspirin dose was maintained afterward as a life-long regimes(3 St. Jude Medical, 1 Hall-Kaster and 7 Carpentier-Edwards valve, 9 patients in atrial fibrilation). Group III ; 7 patients who quit anticoagulant treatment (Warfarin + Aspirin) 6-12 months after the regime as group II (3 St. Jude Medical. 1 bjork-Shiley, 1 Hall-Kaster, 3 Carpentier-Edwards valve, 2 of them are with atrial fibrillation). Group IV ; 35 healthy vounteers (28 males and 7 females). The following results were obtained. 1. The mean maximal platelet aggregability in Group I induced by 10uM/L epinephrine was 15.6%, and 17.5 and 18.7% in BM in proportion to the induction by 5 and 10 uM/L ADP. 2. The mean maximal platelet aggregability in Group II induced by 10uM/L epinephrine was 16.5%, and 27.4 and 44.7% in BM in proportion to the induction by 5 and 10uM/L ADP. 3. The mean maximal platelet aggregability in group III induced by 10uM/L epinephrine was 65%, and 56.5 and 51.8% in BM in proportion to the induction by 5 and 10 uM/L ADP. 4. The mean maximal platelet aggregability in the normal subjects induced by 10 uM/L epinephrine was 64%, and 65 and 69% in Bm inproportion to the induction by 5 and 10 uM/L ADP. 5. Reversible change of platelet aggregation curve induced by 5 and 10uM/L was noted all of the patients in Group I. conclusion : Ticlopidine is an antiaggregating agent which inhibits primary platelet aggregation induced by ADP, and increases the production of prostaglandin $D_{2}$. Ticlopidine and Aspirin produced a significant inhibition of platelet in the presence of ADP and epinephrine in our study. Acccording to our brief experience, 250 mg of ticlopidine and low dose of Aspirin resulted synergistic superior effect to each drug alone in prevention of thromboembolism after prosthetic cardiac valve replacement.