• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.51-57
• /
• 2009

Biofouling in seawater reverse osmosis (SWRO) desalination process causes many problems such as flux decline, biodegradation of membrane, increased cleaning time, and increased energy consumption and operational cost. Therefore biofouling is considered as the most critical problem in system operation. To control biofouling in early stage, detection of the most problematic bacteria causing biofouling is required. In this study, six model bacteria were chosen; Bacillus sp., Flavobacterium sp., Mycobacterium sp., Pseudomonas aeruginosa, Pseudomonas fluorescens, and Rhodobacter sp. based on report in the literature and phylogenetic analysis of seawater intake and fouled RO membrane. The adhesion to RO membrane, the high pressure resistance, and the hydrophobicity of the six model bacteria were examined to find out their fouling potential. Rhodobacter sp. and Mycobacterium sp. were found to attach very well to RO membrane surface compared to others used in this study. The test of hydrophobicity revealed that the bacteria which have high hydrophobicity or similar contact angle with RO membrane ($63^{\circ}$ of contact angle) easily attached to RO membrane surface. P. aeruginosa which is highly hydrophilic ($23.07^{\circ}$ of contact angle) showed the least adhesion characteristic among six model bacteria. After applying a pressure of 800 psi to the sample, Rhodobacter sp. was found to show the highest reduction rate; with 59-73% of the cells removed from the membrane under pressure. P. fluorescens on the other hand analyzed as the most pressure resistant bacteria among six model bacteria. The difference between reduction rates using direct counting and plate counting indicates that the viability of each model bacteria was affected significantly from the high pressure. Most cells subjected to high pressure were unable to form colonies even thought they maintained their structural integrity.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Journal of Chest Surgery
• /
• v.19 no.1
• /
• pp.35-42
• /
• 1986

Prevention of thrombombolism after rosthetic cardiac valve replacement is essential for the patients. About 90% of patients are free of major and minor thromboembolic complications 5 year after replacement of cardiac valves with prosthetic devices when they are under control of anticoagulant therapy. Ticlopidine is a drug that alter platelet function to have an antithrombotic effect. It is an antiaggregating agent which inhibits primary platelet function to have an antithrombotic effect. It is an antiaggregating agent which inhibits primary platelet aggregation induced by ADP and increases the production of prostaglandin $D_{2}$. Aspirin in small doses inhibits platelet synthesis of prostaglandins by irreversibly blocking the enzyme cyclo-oxygenase. Platelet secretion and aggregation are impaired with Ticlopidine and Aspirin. the thromboembolic event sof 54 patient s who were treated with Ticlopidine and Aspirin after cardiac valve replacement were evaluated and compared with that of 79 patients who were treated with Wafarin and Aspirin after the same type of operation. The follow-up period ranged from 4 to 110 months (mean of 48 months). there were 11 major thromboembolic episodes including three deaths in the warfarin goup during mean follow-up period of 56 months. two cases of CVA and one hemoarthrosis were noted due to overdose of Warfarin. Inticlopidine group, there was only one fatal thromboembolic epdisode three month after mitral valve replacement during mean follow-up period of 18 months. Two episodes of hypermenorrhea resulting anemia ere noted in the ticlopidine group. We measured the parameters of platelet function in aggreagation curve of platelet with platelet aggregometer (chrono-log Aggregometer, Model No. 430) Aggregation test was performed with three final concentrations of epinephrine in 10 uM/L, ADP in 5uM/L. 28 patients with prosthetic cardiac valves and 35 healthy volunteers were subgrouped as follows to analyze the effect of antithrombotic drugs used. Group I ; 11 patients treated with 250-500 mg of ticlopidine and 0.5gm of Aspirin as a daily single dose after cardiac valve replacement (14 St. Jude Medical and 1 Carpentier-Edwards, 9 patients with atrial fibrillation among them) Group II ; 10 patients treated with 3-5 mg of Warfarin and 0.75 gm of Aspirin daily to prolong prothrombin time around 20 seconds for more than 6 months and single Aspirin dose was maintained afterward as a life-long regimes(3 St. Jude Medical, 1 Hall-Kaster and 7 Carpentier-Edwards valve, 9 patients in atrial fibrilation). Group III ; 7 patients who quit anticoagulant treatment (Warfarin + Aspirin) 6-12 months after the regime as group II (3 St. Jude Medical. 1 bjork-Shiley, 1 Hall-Kaster, 3 Carpentier-Edwards valve, 2 of them are with atrial fibrillation). Group IV ; 35 healthy vounteers (28 males and 7 females). The following results were obtained. 1. The mean maximal platelet aggregability in Group I induced by 10uM/L epinephrine was 15.6%, and 17.5 and 18.7% in BM in proportion to the induction by 5 and 10 uM/L ADP. 2. The mean maximal platelet aggregability in Group II induced by 10uM/L epinephrine was 16.5%, and 27.4 and 44.7% in BM in proportion to the induction by 5 and 10uM/L ADP. 3. The mean maximal platelet aggregability in group III induced by 10uM/L epinephrine was 65%, and 56.5 and 51.8% in BM in proportion to the induction by 5 and 10 uM/L ADP. 4. The mean maximal platelet aggregability in the normal subjects induced by 10 uM/L epinephrine was 64%, and 65 and 69% in Bm inproportion to the induction by 5 and 10 uM/L ADP. 5. Reversible change of platelet aggregation curve induced by 5 and 10uM/L was noted all of the patients in Group I. conclusion : Ticlopidine is an antiaggregating agent which inhibits primary platelet aggregation induced by ADP, and increases the production of prostaglandin $D_{2}$. Ticlopidine and Aspirin produced a significant inhibition of platelet in the presence of ADP and epinephrine in our study. Acccording to our brief experience, 250 mg of ticlopidine and low dose of Aspirin resulted synergistic superior effect to each drug alone in prevention of thromboembolism after prosthetic cardiac valve replacement.

• Journal of Chest Surgery
• /
• v.34 no.6
• /
• pp.477-484
• /
• 2001

Background: Initial symptoms for esophageal perforation have not been clarified, but when there is no early diagnosis and proper treatment to follow immediately after the diagnosis, it is fatal for the patients. Therefore, this study attempted to discover the factors that influence the prognosis of esophageal perforation to contribute to the improvement of the treatment result. Material and Method: The subjects of this study are 32 patients who came to the hospital with esophageal perforation from October, 1984 to June, 2000. This study examined the items for clinical observation such as patients' sex, age, cause of the perforation, perforation site, the time spent until the beginning of the treatment, symptoms caused by the perforation and its complication, and treatment methods. This study tried to find out the relationship between the survival of patients and each item. Result: There were 24 male and 8 female patients and their mean age was 49.7+16.4. For the causes of perforation, there were 14 cases(43%) of iatrogenic perforation, which ranked first, caused by the medical instrument operation and surgical damage. As for the perforation sites, thoracic esophagus was the most common site(26 cases of 81.2%) and chest pain was the most frequent symptom. The complication caused by esophageal perforation showed the highest cases in the order of mediastinitis, empyema, sepsis and peritonitis. After the treatment, there were 23 cases of survival and 9 cases of mortality. The total mortality rate was 28.1% and the main causes of mortality were sepsis and acute respiratory distress syndrome(ARDS). As for the treatment, 8 cases(25.0%) treated the perforation successfully using conservative treatment only. As for the surgical treatment, there were 5 cases(15.6%) of cervical drainage, 7 cases (21.8%) of primary repair and 12 cases(37.5%) of esophageal reconstruction after performing an exclusion-diversion. There were 18 cases(56.2%) of complete treatment of esophageal perforation at its initial treatment and in 14 cases(43.8%) of treatment failure at its initial treatment, patients were completely cured in the next treatment stage or died during the treatment. The cases of perforation in thoracic esophagus, complication into severe mediastinitis or sepsis and the cases of failure at initial treatment showed a statistically significant mortality rate (p<0.05).

• Journal of Chest Surgery
• /
• v.40 no.1 s.270
• /
• pp.32-36
• /
• 2007

Background: Although acute renal failure (ARF) after coronary artery bypass graft (CABG) is relatively rare, but devastating complication with high mortality. Our study aims to evaluate the effectiveness of early application of CRRT in patients with ARF which developed after on-pump CABG. Material and Method: Two hundred and eighty seven patients underwent isolated on-pump CABG between May 2002 and Feb. 2006 at our institution, of whom 15 (5.2%) needed CRRT (11 patients for postoperatively developed ARF and the remaining 4 patients with preexisting dialysis-dependent chronic renal failure (CRF) for postoperative hemodynamic and metabolic control). Criteria for early application of CRRT were as follows; decreased urine output less than 0.5cc/h/kg for 2 consecutive hours and elevated serum creatinine level greater than 2.0 mg/dL. Result: The incidence of ARF requiring CRRT after on-pump CABG was 3.9% (11/283) and the overall hospital mortality of patient with CRRT was 33.3% (5/15). Of 5 deaths, 4 were patients with postoperatively developed ARF, and 1 was a patient with pre-existing dialysis-dependent CRF patient. The mean time between the operation and the initiation of CRRT was $25.8{\pm}5.8$ hours and the mean duration of CRRT was $62.1{\pm}41.2$ hours. Of the 7 survivors who were not on dialysis-dependent preoperatively, 6 patients fully recovered renal function during hospital stay and 1 patient required permanent renal supportive treatment after discharge from hospital. Conclusion: Early application of CRRT could maintain stable postoperative hemodynamic status and make outcomes better than those of previous reports in patients with ARF which developed after on-pump CABG.

• Journal of Chest Surgery
• /
• v.42 no.6
• /
• pp.749-756
• /
• 2009

Background: Vascular ring is a rare anomaly of the aortic arch. We did surgical repair procedures on 16 cases of vascular ring over the past 12 years. This article reviews our results. Material and Method: Between 1995 and 2007, 16 patients (5 with double aortic arch, 7 with right aortic arch-left ligamentum, 4 with pulmonary artery sling) underwent surgical repair. Mean age at the time of the operation were as follows: double aortic arch, $5.7{\pm}5.5$ years; right aortic arch-left ligamentum, $6.1{\pm}13.4$ years; pulmonary artery sling, $2.9{\pm}2.6$ years. Five patients (71%) with right aortic arch-left ligamentum had an associated Kommerell's diverticulum. Two patients (40%) with double aortic arch, 2 patients (28.6%) with right aortic arch-left ligament and 4 patients (100%) with pulmonary artery sling had associated airway stenosis. Cardiac anomalies were present in 8 of 16 patients. Result: There was no peri-operative or post-operative mortality. The mean hospital stay was $27.1{\pm}38.2$ days. None of our patients underwent reoperation. Conclusion: Vascular ring is rare, but, it needs surgical correction. It is important to suspect the diagnosis and to validate with echocardiography. Preoperative and postoperative computed tomography and bronchoscopy are useful to evaluate the airway and surrounding structures.

• Radiation Oncology Journal
• /
• v.9 no.2
• /
• pp.285-291
• /
• 1991

One hundred and twenty six patients with early uterine cervical cancer who had been treated at Departmen of Radiation Oncology of Korea University Hospital from Jan.1981 to Dec.1988 were analysed retrospectively by the treatment result and pattern of of failures. All patients had stage Ia to IIa disease and were grouped whether they had combination of operation and postop irradiation or radiation therapy alone. 1) Sixty six patients belonged to the combination treatment group and 60 patients to the radiation alone group. 2) Combination group consisted of $18.1\%$(12/66) stage Ia, $71.2\%$(47/66) stage Ib and $10.6\%$ (7/66) stage IIa patients. There were no stage Ia, 18.8$\%$(l1/60) stage Ib and 81.6$\%$(49/60) stage IIa patients for RT alone gronp. 3) There were total 23$\%$(29/126) treatment failures,13 patients in combination group and 16 patients in RT alone group. In 66 patients of combination group, they were found to have 5 locoregional failures, 7 distant failures and 1 at both sites. In 60 patients of RT alone group, 9 locoreginal failure and 7 distant failures occured. Eighty six percent (25/29) of total failures appeared within 18 month after completion of treatment. About 60$\%$ of the patients with regional recurrences which were located at pelvic side wall or pelvic lymph nodes paesented their recurrent disease after 1 year of completion of treatment, whereas same percent of distant failures appeared within 6 month. 5) In RT alone group, the first sites of distant failure were mostly para-aortic lymph node and/or left supraclavicular lymph node (71.4$\%$,5/7). In combination group, various sites such as inguinal lymph node, mediastinal lymph node, liver, lung and bone appeared first or at the same time with para-aortic and supraclavicular lymph node metastasis. 6) Logistic regression analysis was done for multivariate analysis of the factors contributing to locoregional and distant failures. In combination group, adequacy of the resection margin and the presence of positive pelvic node were found to be the most significant factors (p=0.0423 & 0.0060 respectively). In RT alone group, less than complete regression of the tumor at the end of treatment was the only significant contributing factor for the treatment failures (p=0.0013) with good liklihood ratio.

• Radiation Oncology Journal
• /
• v.23 no.2
• /
• pp.92-97
• /
• 2005

Purpose : Reports on the outcome of curative radiotherapy for the primary hepatocellular carcinoma (HCC) are rarely encountered in the literature. in this study, we report our experience of a clinical trial where fractionated stereotactic radiotherapy (SRT) was used in treating a primary HCC. Materials and Methods : A retrospective analysis was peformed on 20 patients who had been histologically diagnosed as HCC and treated by fractionated SRT. The long diameter of tumor measured by CT was $2\~6.5$ cm (average: 3.8 cm). A single dose of radiation used in fractionated SRT was S or 10 Gy: each dose was prescribed based on the planning target volume and normalized to $85\~99\%$ isocenter dose. Patients were treated $3\~5$ times per week for 2 weeks, with each receiving a total dose of 50 Gy (the median dose: 50 Gy). The follow up period was $\~55$ months (the median follow up period: 23 months). Results : The response rate was $50\%$ (12 patients), with 4 patients showing complete response ($20%$), 8 patients showing partial response ($40\%$), and 8 patients showing stable disease ($40\%$). The 1-year and 2-year survival rates were $70.0\%$ and $43.1\%$, respectively, and the median survival time was 20 months. The 1-year and 2-year disease free survival rates were $65\%$ and $32.5\%$, respectively, and the median disease-free survival rate was 19 months. Some acute complications of the treatment were noted as follows: dyspepsia in 12 patients ($60\%$), nausea/emesis in 8 patients ($40\%$), and transient liver function impairment in 6 patients ($30\%$). However, there was no treatment related death. Conclusion : The study indicates that fractionated SRT is a relatively safe and effective method for treating primary HCC. Thus, fractionated SRT may be suggested as a local treatment for HCC of small lesion and containing a single lesion, when the patients are inoperable or operation is refused by the patients. We thought that fractionated SRT is a challenging treatment modality for the HCC.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.221-227
• /
• 2002

Column experiments were performed to evaluate the removal efficiency of soil vapor extraction (SVE) iota TCE (trichloroethylene) and toluene in soil. Homogeneous Ottawa sands and real soils collected from contaminated area were used to investigate the effect of soil properties and SVE operation conditions on the removal efficiency. In column teats with two different sizes of Ottawa sand, the maximum effluent TCE concentration in a coarse sand column was 442 mg/L and 337 mg/L in a fine sand column. However, after 20 liter gas flushing, the effluent concentrations were very similar and more than 90% of initial TCE mass were removed from the column. For two real contaminated soil columns, the maximum effluent concentration decreased 50% compared with that in the homogeneous Ottawa coarse sand column, but 99% of initial TCE mass were extracted from the column within 40 liter air flushing, suggesting that SVE is very available to remove volatile NAPLs in the contaminated soil. To investigate the effect of contaminant existing time on the removal efficiency, an Ottawa sand column was left stable for one week after TCE was injected and the gas extraction was applied into the column. Its effluent concentration trend was very similar to those for other Ottawa sand columns except that the residual TCE after the air flushing showed relatively high. Column tests with different water contents were performed and results showed high removal efficiency even in a high water content sand column. Toluene as one of BTEX compounds was used in an Ottawa sand column and a real soil column. Removal trends were similar to those in TCE contaminated columns and more than 98% of initial toluene mass were removed with SVE in both column.

• Journal of agriculture & life science
• /
• v.46 no.5
• /
• pp.143-152
• /
• 2012

This study was performed to reduce the operating cost of a greenhouse by securing electric energy required for greenhouse operation. Therefore, it experimentally reviewed the performance analysis of photovoltaic system in terms of maximum amount of generated electric power based on the amount of horizontal solar radiation during daytime. That is to say, the maximum solar radiation at 300, 400, 500, 600, 700, 800 and 900 W. $m^{-2}$, respectively. The amount of momentary electric power of the photovoltaic system at any was about 970 W and we found that the momentary efficiency of the photovoltaic system that was used for this experiment was 97%. In the case of this system, we found that electric power will be generated when amount of horizontal solar radiation is more than 200 W. $m^{-2}$, at minimum. If the amount of horizontal solar radiation is increased, the maximum power generation is also increased. At that time, the maximum efficiencies were 30, 78, 86 and 90%, respectively. However, when the amount of insolation was about 800 W. $m^{-2}$, the maximum power generation tended to be lower than 700 W. $m^{-2}$. The efficiency which caused the maximum electric power was decreased to less than 97% of the momentary generated electric power. When the total amounts of horizontal solar radiation per day were 3.24, 8.10, 10, 90, 12.70, 14.33, 19.53 and $21.48MJ{\cdot}m^{-2}$ respectively, the total amounts of power energy were 0.03, 0.40, 3.60, 4.37, 4.71, 4.70 and 4.91 kWh. And it represented that the total amounts of power energy were either decreased or increased a bit on the border between some solar radiations. The temperature at the back of the array tended to be higher than the temperature at the front but it demonstrated an increased when the amount of solar radiation increased. In the case of this system, the performance of the module in terms of degradation has not been shown yet.