• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.169-172
• /
• 2000

This paper describes design of cryptographic processor which can execute SEED, DES, and triple DES encryption algorithm. To satisfy flexible architecture and area-efficient structure, the processor has I unrolled loop structure with hardware sharing and can support four standard mode, such as ECB, CBC, CFB, and OFB modes. To reduce overhead of key computation, the precomputation technique is used. Also to eliminate increase of processing time due to data input and output time, background I/O technique is used which data input and output operation execute in parallel with encryption operation of cryptographic processor. The cryptographic processor is designed using 2.5V 0.25 $\mu\textrm{m}$ CMOS technology and consists of about 34.8K gates. Its peak performances is about 250 Mbps under 100 Mhz ECB SEED mode and 125 Mbps under 100 Mhz triple DES mode.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.04a
• /
• pp.117-120
• /
• 2000

This paper describe VLSL design of crytographic processor which can execute triple DES and DES encryption algorithm. To satisfy flexible architecture and area-efficient structure, the processor has 1 unrolled loop structure without pipeline and can support four standard mode, such as ECB, CBC, CFB, and OFB modes. To reduce overhead of key computation , the key precomputation technique is used. Also to eliminate increase of processing time due to data input and output time, background I/O techniques is used which data input and output operation execute in parallel with encryption operation of cryptographic processor. The cryptographic processor is implemented using Altera EPF10K40RC208-4 devices and has peak performance of about 75 Mbps under 20 Mhz ECB DES mode and 25 Mbps uder 20 Mhz triple DES mode.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.123.2-123.2
• /
• 2010

Fuel Cell cogeneration system is a promising technology for generating electricity and heat with high efficiency of low pollutant emission. We have been developed 5kW class fuel cell cogeneration system for commercial and residential application. The fuel processor is a crucial part of producing hydrogen from the fossil fuels such as LNG and LPG. The 5kW class high efficiency fuel processor consists of steam reformer, CO shift converter, CO preferential oxidation(PrOx) reactor, burner and heat exchanger. The one-stage CO shift converter process using a metal oxide catalyst was adopted. The efficiency of 5 kW class fuel processor shows 75% based on LHV. In addition, for the purpose of continuous operation with load fluctuations in the commercial system for residential use, load change of fuel processor was tested. Efficiency of 30%, 50%, 70% and 100% load shows 75%, 75%, 73% and 72%(LHV), respectively. Also, during the load change conditions, the product gas composition was stable and the outlet CO concentration was below 5 ppm. The Fuel processor operation was carried out in residential fuel cell cogeneration system with fuel cell stack under dynamic conditions. The 5kW class fuel processor have been evaluated for long-term durability and reliability test including with improvement in optimal operation logic.

• 전자공학회논문지 IE
• /
• v.44 no.3
• /
• pp.12-22
• /
• 2007

In this paper, we designed of the high speed digital neuron processor in order to digital neural networks. we designed of the MAC(Multiplier and Accumulator) operation unit used residue number system without carry propagation for the high speed operation. and we implemented sigmoid active function which make it difficult to design neuron processor. The Designed circuits are descripted by VHDL and synthesized by Compass tools. we designed of MAC operation unit and sigmoid processing unit are proved that it could run time 19.6 nsec on the simulation and decreased to hardware size about 50%, each order. Designed digital neuron processor can be implementation in parallel distributed processing system with desired real time processing, In this paper.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.8
• /
• pp.35-45
• /
• 1999

In this paper, the addition and the multiplicative algorithm of two polynomials over finite field $GF(p^m)$ are presented. The 4-valued arithmetic processor of the serial input-parallel output modular structure on $GF(4^3)$ to be performed the presented algorithm is implemented by current mode CMOS. This 4-valued arithmetic processor using current mode CMOS is implemented one addition/multiplication selection circuit and three operation circuits; mod(4) multiplicative operation circuit, MOD operation circuit made by two mod(4) addition operation circuits, and primitive irreducible polynomial operation circuit to be performing same operation as mod(4) multiplicative operation circuit. These operation circuits are simulated under $2{\mu}m$ CMOS standard technology, $15{\mu}A$ unit current, and 3.3V VDD voltage using PSpice. The simulation results have shown the satisfying current characteristics. The presented 4-valued arithmetic processor using current mode CMOS is simple and regular for wire routing and possesses the property of modularity. Also, it is expansible for the addition and the multiplication of two polynomials on finite field increasing the degree m and suitable for VLSI implementation.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.301-304
• /
• 2000

In this paper, we designed a 256-point FFT processor using VHDL. We adopted Radix-2$^2$SDC(Single-path Delay Commutator) architectures to reduce the number of complex multipliers. We confirmed the operation of the design through simulation using Altera MAX+PLUS II.

• Journal of Sensor Science and Technology
• /
• v.32 no.4
• /
• pp.246-251
• /
• 2023

Internet of Things (IoT) systems process signals from various sensors using signal processing algorithms suitable for the signal characteristics. To analyze complex signals, these systems usually use signal processing algorithms in the frequency domain, such as fast Fourier transform (FFT), filtering, and short-time Fourier transform (STFT). In this study, we propose a multi-mode sensor signal processor (SSP) accelerator with an FFT-based hardware design. The FFT processor in the proposed SSP is designed with a radix-2 single-path delay feedback (R2SDF) pipeline architecture for high-speed operation. Moreover, based on this FFT processor, the proposed SSP can perform filtering and STFT operation. The proposed SSP is implemented on a field-programmable gate array (FPGA). By sharing the FFT processor for each algorithm, the required hardware resources are significantly reduced. The proposed SSP is implemented and verified on Xilinxh's Zynq Ultrascale+ MPSoC ZCU104 with 53,591 look-up tables (LUTs), 71,451 flip-flops (FFs), and 44 digital signal processors (DSPs). The FFT, filtering, and STFT algorithm implementations on the proposed SSP achieve 185x average acceleration.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.105-108
• /
• 2001

4 32-bit RISC core is designed for embedded application and DSP. This processor offers low power consumption by fully static operation and compact code size by efficient instruction set. Processor performance is improved by wing conditional instruction execution, block data transfer instruction, multiplication instruction, bunked register file structure. To support compact code size of embedded application, It is capable cf executing both 16-bit instructions and 32-bit instruction through mixed mode instruction conversion Furthermore, for fast MAC operation for DSP applications, the processor has a dedicated hardware multiplier, which can complete a 32-bit by 32-bit integer multiplication within seven clock cycles. These result in high instruction throughput and real-time interrupt response. This chip is implemented with 0.35${\mu}{\textrm}{m}$, 4- metal CMOS technology and consists of about 50K gate equivalents.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.164-167
• /
• 2002

This paper presents the design of Rijndael crypto-processor with 128 bits, 192 bits and 256 bits key size. In October 2000 Rijndael cryptographic algorithm is selected as AES(Advanced Encryption Standard) by NIST(National Institute of Standards and Technology). Rijndael algorithm is strong in any known attacks. And it can be efficiently implemented in both hardware and software. We implement Rijndael algorithm in hardware, because hardware implementation gives more fast encryptioN/decryption speed and more physically secure. We implemented Rijndael algorithm for 128 bits, 192 bits and 256 bits key size with VHDL, synthesized with Synopsys, and simulated with ModelSim. This crypto-processor is implemented using on-the-fly key generation method and using lookup table for S-box/SI-box. And the order of Inverse Shift Row operation and Inverse Substitution operation is exchanged in decryption round operation of Rijndael algorithm. It brings about decrease of the total gate count. Crypto-processor implemented in these methods is applied to mobile systems and smart cards, because it has moderate gate count and high speed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.3
• /
• pp.309-322
• /
• 2021

In this study, an extension instruction set for high-speed operation of the ARIA block cipher algorithm on RISC-V processor is added to support high-speed cryptographic operation on low performance IoT devices. We propose the efficient ARIA cryptographic instruction set which runs on a conventional 32-bit processor. Compared to the existing software cryptographic operation, there is a significant performance improvement with proposed instruction set.