• Child Health Nursing Research
• /
• 제20권2호
• /
• pp.123-131
• /
• 2014

목적 본 연구의 목적은 아동대상자의 수술 후 간호를 주제로 문제기반학습 연계 시뮬레이션 교육 프로그램(simulation integrated with problem based learning, SIM-PBL) 개발과정을 기술하고, 교육 프로그램이 간호대학생의 임상간호 수행능력과 자아 효능감에 미치는 효과를 파악하기 위함이다. 방법 본 연구는 대조군 중재군 전후 시차 설계를 통한 유사 실험 연구이다. 자료수집 기간은 2012년 4월 23일부터 5월 18일까지 총 4주간이었다. 연구대상은 4년제 간호학과의 3학년에 재학 중인 학생을 대상으로 아동간호학 임상실습 중인 학생을 편의표집 하였고, 시차를 이용하여 대조군 18명, 중재군 18명으로 구성하였다. 대조군에게는 기존 임상실습교육이 제공되고, 중재군에게는 임상실습 시간 중 150분을 SIM-PBL로 대체하였다. SIM-PBL의 효과 평가를 위해 시뮬이션을 기반으로 한 임상간호 수행능력 평가(simulation based clinical examination, SCE)와 자아효능감이 이용되었다. 결과 SIM-PBL 교육을 받은 중재군은 대조군과 비교하여, 교육 후 임상간호 수행능력의 향상 정도가 일부 영역에서 통계적으로 유의한 차이를 보였다(신체검진: 3.019, p =.005; 수술 후 교육: t=2.428, p =.021). 그러나 자아효능감은 두 군 사이에 통계적으로 유의한 어떤 차이도 보여주지 못하였다. 결론 본 연구에서 사용된 SIM-PBL은 간호대학생들의 아동대상자를 위한 수술 후 간호 및 투약수행에 대한 임상간호 수행능력의 일부 영역을 향상시키는데 효과적이었다. 본 연구는 시뮬레이션 기반 교육과 문제기반학습의 두 가지 교육방법을 혼합하여 교육 프로그램을 구성하였고, 구조화된 체크리스트 도구를 통해 객관적으로 임상간호 수행능력을 평가하였다는 점에 의의가 있으며, 추후 이러한 교육 프로그램의 적극적 활용 및 중재의 크기에 따라 효과를 다양하게 입증하는 연구가 수행될 것을 제언한다.

• 한국산업융합학회 논문집
• /
• 제23권5호
• /
• pp.835-842
• /
• 2020

This paper considers a method of reproducing abnormal and fault operation for smart monitoring of thrust bearing used in wave power generation system. In order to develop smart monitoring technology, abnormal and failure data of actual equipment are required. However, it is impossible to artificially break down the actual equipment in operation due to safety and cost. To tackle this problem, a test bed that can secure data through reproduction of a faulty operating environment should be developed. Therefore, in this study, test bed that can reproduce each situation was developed and the operation result was analysis after identifying the situation to be reproduced through the failure factor analysis of the thrust bearing.

• 대한골관절종양학회지
• /
• 제1권1호
• /
• pp.23-29
• /
• 1995

Recently limb-salvage operation is widely used for the treatment of malignant bone tumor. But distal leg is out of range of limb-salvage operation due to its technical problem. We report satisfactory limb-salvage operation with tumor prosthesis in 3 cases of osteosarcoma of the distal tibia and fibula. Two cases involved in the tibia and 1 case in the fibula. Average age at operation was 23 years. Neoadjuvant and adjuvant chemotherapy were performed in all 3 cases. We used custom made tumor prosthesis which is designed by Seoul National University Orthopaedic Department. Overall Functional Evaluations by Enneking rating system were good in all 3 cases. All cases are CDF(continuosly disease free since the surgical procedure) state at mean follow-up 2 year and 9 months. In conclusion limb-salvage with tumor prosthesis is useful treatment modality for malignant bone tumor of distal tibia and fibula. Good functional results and few complications suggests limb salvage of distal lower leg may be replaceable with B-K amputation.

• 조명전기설비학회논문지
• /
• 제17권6호
• /
• pp.83-88
• /
• 2003

본 논문에서는 IPM의 전기적인 기생 성분 중에서 성능에 가장 크게 영향을 미치는 밀러 커패시턴스에 의하여 발생하는 오동작을 시뮬레이션을 통하여 증명하고 이를 최소화하기 위한 방법을 제시한다. 게이트와 컬렉트 단자간에 형성되는 밀러 커패시턴스와 밀접하게 관련된 게이트-에미터 사이의 기생 커패시턴스와 게이트 저항과의 상관 관계를 PSpice 시뮬레이션을 통하여 분석한다. 또한 시뮬레이션 결과를 바탕으로 IPM의 오동작을 최소화하기 위한 보조 회로를 삽입한 주문형 IPM을 제시한다. 표준형 IPM과 오동작 방지를 위해 보조회로가 삽입된 주문형 IPM의 실험 파형을 통해서 주문형 IPM이 약 3 [V]의 오동작에 대한 여유 전압을 가짐을 확인할 수 있다.

• Industrial Engineering and Management Systems
• /
• 제16권1호
• /
• pp.1-21
• /
• 2017

This paper discusses a reverse supply chain (RSC) which consists of the process flows from procurement of used products collected from a market, through remanufacturing products from the used products, to sales of the products in a market. In general, it is conceivable for the RSC to face the uncertainty in quality of used products collected from a market. Inspection is one of efficient methods to deal with the problem regarding quality of used products. However, there is a trade-off between inspection cost and inspection accuracy. This paper focuses on the following five types of inspection: (1) 100% inspection, (2) sampling inspection, (3) sampling inspection with screening of rejected lots, (4) sampling inspection with screening of acceptable lots, and (5) no inspection, and determines the optimal operation consisting of the optimal number of procured used products and the optimal inspection policy. Numerical analysis clarifies not only how changes of conditions of the RSC affect the manufacturer's optimal operation but also features of each inspection type. In addition, from the results of numerical analysis, this paper shows the usability to add the proposed inspection in this paper, the sampling inspection with screening of acceptable lots, to choices of inspection type.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.75-84
• /
• 2014

PURPOSES : Traffic congestions which occur in the intersections of arterials lead to mobility and environment problem, and then traffic agencies and engineers have been struggling for mitigating congestions with greenhouse gas emissions. As an alternative of solving theses problems, this study is to introduce a low-cost and high-effectiveness countermeasure as unconventional intersections which are successfully in operation in U.S.. The main feature of unconventional intersections is to reroute turning movement on an approach to other approach, which consequently more green time is available for the progression of through traffic. Due to improved progression, this unique geometric design contributes to reduce delays with greenhouse gas emission and provides a viable alternative to interchanges. This study is to evaluate the potential operation and environment benefits of unconventional intersections. METHODS : This study used the VISSIM model with Synchro and EnViVer. Synchro is to optimize signal phases and EnViVer model to estimate the amount of greenhouse gas emissions by each condition. RESULTS : The result shows that unconventional intersections lead to increase the capacity and to reduce greenhouse gas emissions, compared to existing intersections. CONCLUSIONS : Unconventional intersections have the ability to positively impact operations and environments as a low-cost and high-effectiveness countermeasure.

• KIEAE Journal
• /
• 제14권6호
• /
• pp.105-110
• /
• 2014

The basic factors determining the amount of energy used in hospital buildings are weather conditions and building factors. But the real energy consumer is central plant equipment such as boilers and chillers that produce thermal energy for heating and cooling. Inaccurate decision of the primary equipment's size can cause a high initial-cost, an excessive equipment space, a wasted energy by low operation-efficiency and shortening of the machine's life. In this reason, the decision of optimal size for central plant equipment is very important. There are several factors for the decision such as an operation factor, a factor (equipment factor), piping losses and a simultaneous usage factor applied in the sizing process except a basic cooling load. But there is no standard method for applying those factors. Usually, factors are applied individually by an experience or custom of each engineer. In this study, the authors emphasize the meaning and the problem of those factors, examine them by analyzing factors which were applied to actual practices, and propose the recommendation value of safety, load, operation factors and application methods.

• 한국인터넷방송통신학회논문지
• /
• 제17권4호
• /
• pp.143-148
• /
• 2017

최근 스마트폰, 디지털 카메라, 자동차 블랙박스와 같은 소형 전자기기들의 저장장치로써 가볍고 외부 충격에 강한 비휘발성 메모리인 플래시 메모리가 널리 이용되고 있다. 플래시 메모리는 읽기연산과 쓰기연산의 연산 속도가 다르며, 덮어쓰기가 불가능한 특징을 가지고 있기 때문에 삭제연산을 추가하여 이러한 문제점을 해결한다. 또한, 플래시 메모리의 삭제횟수가 제한적이기 때문에 마모도 평준화를 고려해야 한다. 최근 플래시 메모리의 이러한 특성을 고려한 플래시 메모리 기반 버퍼 교체 알고리즘에 관한 많은 연구들이 진행되고 있다. 따라서, 본 논문은 기존 플래시 메모리 기반 버퍼 교체 알고리즘의 문제점을 해결하기 위해 페이지를 그룹으로 나누어 관리하며 교체 대상 페이지 선정 시 참조 횟수와 참조 시간을 함께 고려하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.66-72
• /
• 2008

In this study, the ground source heat pump was installed at a research center in Jeju Island to verify the performance of the system and to give an information for a economic feasibility. The performance test was conducted until the heat storage tank temperature reached at $5^{\circ}C$ from $50^{\circ}C$ in the cooling operation, and until the storage temperature goes up to $50^{\circ}C$ from $10^{\circ}C$ in the heating mode. As results, the system performance shows that $2.2{\sim}3.5$ for the cooling operation and $2.5{\sim}3.5$ for heating operation. It is found that the underground is good heat source for the heat pump with $3{\sim}10^{\circ}C$ variation range. The ground source heat pump could be connected one of air conditioning system without any problem in system performance. Based on the economic analysis, the initial cost for the ground source heat pump will be compensated after 4 years operation. If the system runs 20 years, approximately 300 million Won will be saved when the air conditioning system adapt the ground source heat pump based on Life Cycle Cost analysis.

• 한국물환경학회지
• /
• 제24권6호
• /
• pp.651-658
• /
• 2008

Estuary barrier is a hydraulic structure constructed to supply safely water as protecting chlorine penetration of sea water. However, the barrier brings about a problem which decreases original functions of estuary because hydraulic ecology was disrupted as obstructing natural water exchange between fresh water and sea water. It is important to supply Enough fresh water in the estuary ecosystem. But it is possible to reduce the problems brought from barrier throughout efficient water gate operation of estuary barrier. It was shown in this study that the environmental effect of estuary in Nakdong river was investigated according to the control of water level. Also, the basic information about the effective water gate operation was provided. The analysis results showed that the release rate of estuary was increased about 20% as changing the operational water levels. This helps supplying fresh water durably to the mixing zone. Also, CE-QUAL-W2 model was utilized to assess water quality. The values of BOD and COD were not changed in estuary area. From the result, it was analyzed the effect of water quality according to the water gate operation was not indicated.