• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3751-3770
• /
• 2015

Many sorts of image processing software facilitate image editing and also generate a great number of doctored images. Forensic technology emerges to detect the unintentional or malicious image operations. Most of forensic methods focus on the detection of single operations. However, a series of operations may be used to sequentially manipulate an image, which makes the operation detection problem complex. Forensic investigators always want to know as much exhaustive information about a suspicious image's entire processing history as possible. The detection of the operation chain, consisting of a series of operations, is a significant and challenging problem in the research field of forensics. In this paper, based on the histogram distribution uniformity of a manipulated image, we propose an operation chain detection scheme to identify histogram equalization (HE) followed by the dither-like operation (DLO). Two histogram features and a local spatial feature are utilized to further determine which DLO may have been applied. Both theoretical analysis and experimental results verify the effectiveness of our proposed scheme for both global and local scenarios.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.233-236
• /
• 2001

Parallel operation scheme to several transformers is adopted because of the load increase, economic problem, or load shedding. For the transformer's parallel operation, loads proportional to each transformer's capacity must be allotted, and circulation currents must be limited as much as without causing any problem in a real operation. But, both transformers in parallel operation can be tripped when either faults at lower voltage side of a transformer or faults in a bus occurs. Therefore, parallel operation scheme to distribution transformers in Korea is not adopted in a normal state but only when loaded or load-shedded. These are due to the insufficiency of the construction in communication network and AVR scheme. Besides that, those are because bus bar protection scheme to lower voltage side of a transformer is not applied. In spite of enormous initial investment costs, advanced countries take so much account of power system reliability and stable supply that they adopt the parallel operation scheme in a normal state. One of the problems in parallel operation is the overheat of transformers due to the excessive circulation currents. This paper presents the scheme that controls voltages between both transformers using circulation currents that occurs in parallel operation.

• Journal of the Korea Society for Simulation
• /
• v.14 no.4
• /
• pp.1-8
• /
• 2005

In a metal grating manufacturing process, the cutting operation allocates the gratings and cut them out from given panels or a plate sheets. Before the cutting operation an operator generates a cutting plan. The cutting plan should decide how pieces of metal rectangles i.e., gratings, are allocated and cut from the panel. This plan generation is a deal of weight on the production cost. the generation of cutting plan is similar to the general two-dimensional cutting problem. In this paper, we first define cutting problem and Af algorithm of Artificial Intelligence to solve the problem. Also, through a simulation, we compare the proposed cutting algorithm to an existing method in terms of material loss

• School Mathematics
• /
• v.7 no.2
• /
• pp.123-137
• /
• 2005

Elementary combinatorial problem may be classified into three different combinatorial models(selection, distribution, partition). The main goal of this research is to determine the effect of type of combinatorial operation and implicit combinatorial model on problem difficulty. We also classified errors in the understanding combinatorial problem into error of order, repetition, permutation with repetition, confusing the type of object and cell, partition. The analysis of variance of answers from 339 students showed the influence of the implicit combinatorial model and types of combinatorial operations. As a result of clinical interviews, we particularly noticed that some students were not able to transfer the definition of combinatorial operation when changing the problem to a different combinatorial model. Moreover, we have analysed textbooks, and we have found that the exercises in these textbooks don't have various types of problems. Therefore when organizing the teaching , it is necessary to pose various types of problems and to emphasize the transition of combinatorial problem into the different models.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.1
• /
• pp.89-100
• /
• 2016

Given the unpredictability of the space environment, satellite communications are manually performed by exchanging telecommands and telemetry. Ground support for orbiting satellites is given only during limited periods of ground antenna visibility, which can result in conflicts when multiple satellites are present. This problem can be regarded as a scheduling problem of allocating antenna support (task) to limited visibility (resource). To mitigate unforeseen errors and costs associated with manual scheduling and mission planning, we propose a novel method based on a genetic algorithm to solve the ground support problem of multiple satellites and antennae with visibility conflicts. Numerous scheduling parameters, including user priority, emergency, profit, contact interval, support time, remaining resource, are considered to provide maximum benefit to users and real applications. The modeling and formulae are developed in accordance with the characteristics of satellite communication. To validate the proposed algorithm, 20 satellites and 3 ground antennae in the Korean peninsula are assumed and modeled using the satellite tool kit (STK). The proposed algorithm is applied to two operation modes: (i) telemetry, tracking, and command and (ii) payload. The results of the present study show near-optimal scheduling in both operation modes and demonstrate the applicability of the proposed algorithm to actual mission control systems.

• Journal of Korea Multimedia Society
• /
• v.25 no.8
• /
• pp.1097-1108
• /
• 2022

This paper aimed to design and implement an EMS for real-time power generation control based on wake effect optimization of wind farm, and then to test it in commercial operating wind farm. For real-time control, we proposed the wake band-based optimization and setting the wake effect distance limit, and when the wake effect distance limit was set to 7D in the actual wind farm layout, the calculation time was improved by about 93.94%. In addition, we designed and implemented the script-based EMS for flexible operation logic management in preparation for unexpected issues during testing, and it was installed and tested on a wind farm in commercial operation. However, three issues arose during the testing process. These are the communication interface problem of meteorological tower, the problem of an abnormal wake effect, and the problem of wind turbine yaw control. These issues were solved by modifying the operation logic using EMS's script editor, and the test was successfully completed in the wind farm in commercial operation.

• Journal of the Korean Professional Engineers Association
• /
• v.19 no.2
• /
• pp.21-25
• /
• 1986

Structure-borne noise due to forced vibration which is originated from subway operation and transmitted to buildings in order of rail-wood tie-concrete bed-structure-soil-building foundations-members of building results in social problem of environmental pollution. Moreover this becomes a serious problem because of the increment of surface traffic and subway operation made by meeting traffic system in crowded cities. Since subway is constructed along the principal road or through the residential area and as the worst case may be, building foundations is contact with top part of subway structure, it is possible that vibration resonance results in fatal damage of buildings. And, structure-borne vibration noise due to subway operation at late and early hours have the residents suffer from insonmia, restlessness and so on. Therefore, to satisfy the future need concerning the environmental protection, this report deals with the influence of structure-borne vibration noise on the basis of the characteristics of Seoul Subway System.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.11a
• /
• pp.85-88
• /
• 2003

In case that any jobs in a Job Shop can be scheduled on more than one machine and may have flexible operation sequences, with considering such case it is very difficult and complex to make the optimal process plans and scheduling. But they should be considered for an integrated model to perform more effective process planning and scheduling in this job shop problem. In this paper, we propose GA-based scheduling method to integrate effectively the problem of alternative machines, alternative operation sequences and scheduling. The performance of proposed GA is evaluated through comparing integrated scheduling with not integrated scheduling in molding company with alternative machines and operation sequences. Also, we use benchmark problems to evaluate performance. The scheduling method in this research will apply usefully to real world scheduling problems.

• Journal of Distribution Science
• /
• v.3 no.1
• /
• pp.43-67
• /
• 2005

Recently retail market has been rapidly expanded in the large cities of in Korea and the competition among individual companies in retail market is also being increased. Tenant MD of mixing is one of the most important factor for the company to continuously operate or to fail. The aim of this study is to examine the processes of systematically evaluating the merchandising of the established companies in retail market a part of chain operation in discount store. The basic problem of decision making in general and tenant MD of mixing in particular is to choose a best one in a set of competing alternatives that are evaluated under conflicting criteria. The purpose of research of a paper carries out a duty searching examination with making a tenant MD include by retail research, simultaneously defined when I will show an example for the tenant mix of the profitability side of the domestic discount store market which is tenant MD importance proposing the existing problem arrangement by chain operation management, and is intensifying - tenant MD of standardization in discount store of T-company.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.24 no.4
• /
• pp.63-80
• /
• 1999

In the container transportation of inland depots the empty container is an important issue. The truck dispatching problem in this paper is considered under restriction about empty containers. When a full container arrives in a depot by truck, after unloading operation the full container is changed to an empty container. After loading operation an empty container is changed to a full container. We suggest an integrated approach to the problem of simultaneously managing empty truck and container movements. We suggest an integrated approach to the problem of simultaneously managing empty truck and container movements. We would like to find the truck dispatching method minimizing empty truck movements and empty container movements. In this paper, a mixed integer programming model is developed to obtain the optimal truck dispatching in container transportation and heuristic is developed to give a good solution in much shorter time. The numerical examples are studied and the proposed heuristic is also compared with the result of numerical examples.