• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.2
• /
• pp.84-94
• /
• 2018

In recent years, the diminishing of operation and maintenance cost using advanced maintenance technology is attracting many companies' attention. Especially, the heavy machinery industry regards it as a crucial problem since a failure of heavy machinery requires high cost and long downtime. To improve the current maintenance process, the heavy machinery industry tries to develop a methodology to predict failure in advance and to find its causes using usage data. A better analysis of failure causes requires more data so that various kinds of sensor are attached to machines and abundant amount of product usage data is collected through the sensor network. However, the systemic analysis of the collected product usage data is still in its infant stage. Many previous works have focused on failure occurrence as statistical data for reliability analysis. There have been less works to apply product usage data into root cause analysis of product failure. The product usage data collected while failures occur should be considered failure cause analysis. To do this, this study proposes a methodology to apply product usage data into failure cause analysis. The proposed methodology in this study is composed of several steps to transform product usage into failure causes. Various statistical analysis combined with product usage data such as multinomial logistic regression, T-test, and so on are used for the root cause analysis. The proposed methodology is applied to field data coming from operated locomotive and the analysis result shows its effectiveness.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.5
• /
• pp.703-711
• /
• 2018

Recently, as various metro lines have been constructed and connected to other lines the rate of utilization has also been increased. However, the existing fare policy which the government does still stick to causes not only inappropriate action to the demand pattern but aggravation of the profit of the operation company. This study reviewed rail fare policy of major countries such as Japan and U.K etc. to improve the rationality of fare policy in Korea. In order to systematical analysis of fare policy, such viewpoints as of fare decision method, the card fare discounting system, the structure of fare, and the government subsidy policy were reviewed. Based on the results from the review, various problems and improvement plans were drawn. Through this study, appropriate fare systems to urban railway users could be given to improve the chronic deficit problem of urban railway operators.

• Journal of the Korea Convergence Society
• /
• v.7 no.2
• /
• pp.85-91
• /
• 2016

This study is related with support system plans of public-private convergence for emergency recovery services to fire victims. The current issues are analysed from the condition and problem analysis results of emergency recovery activities for fire victims. And building plans of an integrated support system based on the government and private sector cooperation are proposed. Overall, the system shows that the government is responsible for the functionality of management and supervision for the system operation, and the private is responsible for the functionality of specialized agencies for practical emergency recovery. Consequently, support system plans include with infrastructure maintenance of laws and regulations, contracting-out of the support system, stable supply of operating budget and function strengthening of public-private convergence for emergency recovery. Especially, plan for stable supply of operating budget in detail including with establishment of the fund and self-financing composition of private corporations for emergency recovery services is proposed. The results of this study will lead strengthening of fire safety welfare and social safety nets at future.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.1
• /
• pp.9-16
• /
• 2010

In the power generation industry, various efforts are needed to cope with tightening regulation on carbon dioxide emission. Integrated gasification combined cycle (IGCC) is a relatively environmentally friendly power generation method using coal. Moreover, pre-combustion $CO_2$ capture is possible in the IGCC system. Therefore, much effort is being made to develop advanced IGCC systems. However, removal of $CO_2$ prior to the gas turbine may affect the system performance and operation because the fuel flow, which is supplied to the gas turbine, is reduced in comparison with normal IGCC plants. This study predicts, through a parametric analysis, system performances of both an IGCC plant using normal syngas and a plant with $CO_2$ capture. Performance characteristics are compared and influence of $CO_2$ capture is discussed. By removing $CO_2$ from the syngas, the heating value of the fuel increases, and thus the required fuel flow to the gas turbine is reduced. The resulting reduction in turbine flow lowers the compressor pressure ratio, which alleviates the compressor surge problem. The performance of the bottoming cycle is not influenced much.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.3
• /
• pp.336-342
• /
• 2007

Industrial HMI(Human Machine Interface) system is the main element among the factory automation processes and have been used to monitor and control operation and status of machine in factory with PLC. This HMI often brings heavy loads to the system development and difficult decreasing the system because it tends to use a specific system per each manufacturer. Therefore, in this thesis, we have developed an embedded linux-based embedded industrial HMI software modules which can be used for touch panel embedded system to solve these problem. In this module, we have used the Qt/Embedded software component because it can be used by all systems which support C++ compiler without modifying the existing codes. We can design more flexible system and network configuration because we have used the wireless communication module. In this thesis, we implement linux-based HMI software modules which are capable of wireless communication as well as bringing the mobility to the overall system and finally decreasing the system development loads by using the general purpose OS with competitive price.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.6
• /
• pp.779-786
• /
• 2009

This paper deals with $H_{\infty}$ fuzzy control problem of discrete-time nonlinear Markovian jump systems with time delay. The Takgi and Sugeno fuzzy model is employed to represent a delayed nonlinear system that possesses Markovian jump parameters. A stochastic mode dependent Lyapunov function is employed to analyze the stability and $H_{\infty}$ disturbance attenuation performance of the Markovian jump fuzzy system with time delay. Stochastic Lyapunov function is dependent on the operation modes of the system. A sufficient condition for the existence of fuzzy $H_{\infty}$ controller are given in terms of matrix inequalities. Also numerical example is presented to illustrate the efficient of the proposed design methods.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.7-31
• /
• 2005

Landslides triggered by rainfall produce severe effects on the serviceability and stability of railway. Since small amount of soil mass slipped on the rail can cause derailment which will induce great danger on people and trains, slope stability problem is one of the major concerns on the operation of railway In this study we investigated the characteristics of rainfall driven landslide near railway. A total of 23 sites were visited. Four different types of slope failure were classified based upon the morphology of the slipped slope triggered by rainfall. From the analysis dimensions of slopes (height, length and slope) do not show particular correlation with the types of landslides. In addition, morphological and geological features of slope influence the occurrence of different types of landslides.

• Journal of the Korean housing association
• /
• v.23 no.1
• /
• pp.27-41
• /
• 2012

The objective of this study is to develop the blind control strategy and method which reduce negative effect of incoming daylight on visual comfort of occupants, minimize psychological anxieties caused by frequent motions of a blind, and maximize positive effect of incoming daylight and solar irradiation by opening/closing of a blind. As previous researches on blind controls have limited outdoor environmental conditions to those in specific regions, orientations and dates, these resulted in problems at various conditions for general-purpose application. Major problem is that the time interval and amount of blind movement do not meet the control objective at the end of control zone and discontinuous curve. To overcome these limitations revealed in the previous researches, following tasks were performed in this study. 1) To establish the control objective to accomplish the goal of this study. 2) To develop the control methods and algorithms which prevent glare on the work-plane at any time and which control the time interval and amount of blind movement to follow the control objective at various profile angle curves. 3) To validate the general-purpose applicability and performance of the developed control methods and algorithms by simulation and its data analysis at various conditions. It was found that the proposed methods and algorithms can prevent the direct glare on the work-plane at all the time and also increase the incoming daylight and solar irradiation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.4
• /
• pp.1-7
• /
• 2000

In this paper, we study a cause of malfunction of switch to control drive motor in DFMS(Digital Flux Mapping System) which can measure incore neutron flux of the nuclear plant, and develope a method to solve this problem. DFMS has the type of generating contact signal by mechanical switch lever, which is operated whenever thimble detector inserted or withdrawed through thimble Guide Tube. However the characteristics of the lever tend to be changed by mechanical degrade or bad environment and the lever finally generates errotic contact signal. Therefore we installed electric coil ass'yin the outside of Guide Tube instead of mechanical switch assy's. In addition we applied resonance effect to control circuit and installed condenser in the input of power supply to protect noise and interference. After completion of this improvement, we tested this improved device repetitively under the various conditions. In conclusion, we identified the generation of the desired contact signal and the prevention of detector failure through plant surveillance test during normal plant operation.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.3
• /
• pp.73-80
• /
• 2011

This study aims to develop furniture industry in eastern district of Gangwondo and a city of Gangneung and Donghae. Case study on furniture complex in Asahikawa, Japan and survey of furniture companies in Gangneung and Donghae city were implemented for understanding of present state, followed by analysis of problems. It can be summarized as follows. First, the basic operation method of Japanese furniture industry is to keep a balance between industry and academy. Universities or centers are in charge of education and fostering talents, such as allowing to promote and to sell products in design center gallery while corporations support it by lending expensive devices and conducting strength test analysis. Second, according to the survey of furniture companies in Gangneung, many difficulties in products development such as a shortage of designer, method, creative design were discovered. With respect to education and human force fostering, education for design and e-commerce were not sufficient, also marketing section has a problem with limited space for display and selling. Corporate support section is facing problems in receiving raw materials, aging of facilities, manufacturing and management methods. Consequently, it is considered that academic and industrial sections should implement their own roles by forming a bilateral network which connects local universities, high schools, relevant organization in the city and providence and furniture manufacturing companies to companies' product development, human force fostering and marketing in an attempt to activate the furniture industry in this area.