• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.79-86
• /
• 2009

In a steel structure, spray-applied fire resistive materials are crucial in preventing structural strength from being weakened in the event of a fire. The quality control of such materials, however, is difficult for manual workers, who can frequently be in short supply. These skilled workers are also very likely to be exposed to environmental hazards. Problems with construction work such as this, which are specifically the difficulty of achieving quality control and the dangerous nature of the work itself, can be solved to some degree by the introduction of automated equipment. It is, however, very difficult to automate the work process, from operation to the selection of a location for the equipment, as the environment of a construction site has not yet been structured to accommodate automation. This is a fundamental study on the possibility of the automation of spray-applied fire resistive coating work. In this study, the linkability of the cutting-edge RTLS to an automation system is reviewed, and a scenario for the automation of spray-applied fire resistive coating work and system composition is presented. The system suggested in this study is still in a conceptual stage, and as such, there are many restrictions still to be resolved. Despite this fact, automation is expected to have good effectiveness in terms of preventing fire from spreading by maintaining a certain level of strength at a high temperature when a fire occurs, as it maintains the thickness of the fire-resistive coating at a specified level, and secures the integrity of the coating with the steel structure, thereby enhancing the fire-resistive performance. It also expected that if future research is conducted in this area in relation to a cutting-edge monitoring TRS, such as the ubiquitous sensor network (USN) and/or building information model (BIM), it will contribute to raising the level of construction automation in Korea, reducing costs through the systematic and efficient management of construction resources, shortening construction periods, and implementing more precise construction

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.253-263
• /
• 2013

Frequency Scanning Interferometry(FSI) system, one of the most promising optical surface measurement techniques, generally results in superior optical performance comparing with other 3-dimensional measuring methods as its hardware structure is fixed in operation and only the light frequency is scanned in a specific spectral band without vertical scanning of the target surface or the objective lens. FSI system collects a set of images of interference fringe by changing the frequency of light source. After that, it transforms intensity data of acquired image into frequency information, and calculates the height profile of target objects with the help of frequency analysis based on Fast Fourier Transform(FFT). However, it still suffers from optical noise on target surfaces and relatively long processing time due to the number of images acquired in frequency scanning phase. 1) a Polarization-based Frequency Scanning Interferometry(PFSI) is proposed for optical noise robustness. It consists of tunable laser for light source, ${\lambda}/4$ plate in front of reference mirror, ${\lambda}/4$ plate in front of target object, polarizing beam splitter, polarizer in front of image sensor, polarizer in front of the fiber coupled light source, ${\lambda}/2$ plate between PBS and polarizer of the light source. Using the proposed system, we can solve the problem of fringe image with low contrast by using polarization technique. Also, we can control light distribution of object beam and reference beam. 2) the signal processing acceleration method is proposed for PFSI, based on parallel processing architecture, which consists of parallel processing hardware and software such as Graphic Processing Unit(GPU) and Compute Unified Device Architecture(CUDA). As a result, the processing time reaches into tact time level of real-time processing. Finally, the proposed system is evaluated in terms of accuracy and processing speed through a series of experiment and the obtained results show the effectiveness of the proposed system and method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.188-198
• /
• 2005

The Goldschmidt iterative algorithm for finding a floating point square root calculated it by performing a fixed number of multiplications. In this paper, a variable latency Goldschmidt's square root algorithm is proposed, that performs multiplications a variable number of times until the error becomes smaller than a given value. To find the square root of a floating point number F, the algorithm repeats the following operations: $R_i=\frac{3-e_r-X_i}{2},\;X_{i+1}=X_i{\times}R^2_i,\;Y_{i+1}=Y_i{\times}R_i,\;i{\in}\{{0,1,2,{\ldots},n-1} }}'$with the initial value is $'\;X_0=Y_0=T^2{\times}F,\;T=\frac{1}{\sqrt {F}}+e_t\;'$. The bits to the right of p fractional bits in intermediate multiplication results are truncated, and this truncation error is less than $'e_r=2^{-p}'$. The value of p is 28 for the single precision floating point, and 58 for the doubel precision floating point. Let $'X_i=1{\pm}e_i'$, there is $'\;X_{i+1}=1-e_{i+1},\;where\;'\;e_{i+1}<\frac{3e^2_i}{4}{\mp}\frac{e^3_i}{4}+4e_{r}'$. If '|X_i-1|<2^{\frac{-p+2}{2}}\;'$ is true, $'\;e_{i+1}<8e_r\;'$ is less than the smallest number which is representable by floating point number. So, $\sqrt{F}$ is approximate to $'\;\frac{Y_{i+1}}{T}\;'$. Since the number of multiplications performed by the proposed algorithm is dependent on the input values, the average number of multiplications per an operation is derived from many reciprocal square root tables ($T=\frac{1}{\sqrt{F}}+e_i$) with varying sizes. The superiority of this algorithm is proved by comparing this average number with the fixed number of multiplications of the conventional algorithm. Since the proposed algorithm only performs the multiplications until the error gets smaller than a given value, it can be used to improve the performance of a square root unit. Also, it can be used to construct optimized approximate reciprocal square root tables. The results of this paper can be applied to many areas that utilize floating point numbers, such as digital signal processing, computer graphics, multimedia, scientific computing, etc.

• Journal of Korea Game Society
• /
• v.4 no.4
• /
• pp.11-18
• /
• 2004

The on-line games in the past were played by only two persons exchanging data based on one-to-one connections, whereas recent ones (e.g. MMORPG: Massively Multi-player Online Role-playings Game) enable tens of thousands of people to be connected simultaneously. Specifically, Korea has established an excellent network infrastructure that can't be found anywhere in the world. Almost every household has a high-speed Internet access. What made this possible was, in part, high density of population that has accelerated the formation of good Internet infrastructure. However, this rapid increase in the use of on-line games may lead to surging traffics exceeding the limited Internet communication capacity so that the connection to the games is unstable or the server fails. expanding the servers though this measure is very costly could solve this problem. To deal with this problem, the present study proposes the load distribution technology that connects in the form of local clustering the game servers divided by their contents used in each on-line game reduces the loads of specific servers using the load balancer, and enhances performance of sewer for their efficient operation. In this paper, a cluster system is proposed where each Game server in the system has different contents service and loads are distributed efficiently using the game server resource information such as CPU utilization. Game sewers having different contents are mutually connected and managed with a network file system to maintain information consistency required to support resource information updates, deletions, and additions. Simulation studies show that our method performs better than other traditional methods. In terms of response time, our method shows shorter latency than RR (Round Robin) and LC (Least Connection) by about 12%, 10% respectively.

• Journal of Biosystems Engineering
• /
• v.5 no.1
• /
• pp.1-14
• /
• 1980

Threshing operation may be one of the most important processes in the paddy post-production system as far as the grain loss and labor requirement are concerned . head-feeding type threshers commercially available now in Korea originally were developed for threshing dry paddy in the range of 15 to 17 % in wet basis. However, threshing wet-paddy with the grain moisture content above 20 % has been strongly recommended, especially for new high-yielding Indica -type varieties ; (1) to reduce high grain loss incurred due to the handling operations, and (2) to prevent the quantitative and qualitative loss of milled -rice when unthreshed grains are rewetted due to the rainfall. The objective of this study were to investigate the adaptability of both a head-feeding type thresher and a throw-in type thresher to wet-paddy , and to find out the possiblilities of improving the components of these threshers threshing. Four varieties, Suweon 264 and Milyang 24 as Tongil sister line varieties, minehikari and Jinhueng as Japonica-type varieties, were used at the different levels of the moisture content of grains. Both the feed rate and the cylinder speed were varied for each material and each machine. The thresher output quality , composition of tailing return, and separating loss were analyzed from the sampels taken at each treatment. A separate experiment for measurement opf the power requirement of the head-feeding type thresher was also performed. The results are summarized as follows : 1. There was a difference in the thresher output quality between rice varieties. In case of wet-paddy threshing at 550 rpm , grains with branchlet and torn heads for the Suweon 264 were 12 % and 7 % of the total output in weight, respectively, and for the Minehikari 4.5 % and 2 % respectively. In case of dry paddy threshing , those for the Suweon 264 were 8 % and 5% , and for the Minehikari 4% and 1% respectively. However, those for the Milyang 23 , which is highly susceptable to shattering, were much lower with 1 % and 0.5% respectively, regardless of the moisture content of the paddy. Therefore, it is desirable to breed rice varieties of the same physical properties as well as to improve a thresher adaptable to all the varieties. Torn heads, which increased with the moisture content of rall the varieties except the Milyang 23 , decreased as the cylinder speed increased, but grains with branchlet didnt decrease. The damaged kernels increased with the cylinder speed. 3. The thresher output quality was not affected much by the feed rate. But grains with branchlet and torn heads increased slightly with the feed rate for the head-feeding type thresher since higher resistance lowered at the cylinder speed. 4. In order to reduce grains with branchlet and torn heads in wet-paddy threshing , it is desirable to improve the head-feeding type thresher by developing a new type of cylinder which to not give excess impact on kernels or a concave which has differenct sizes of holes at different locations along the cylinder. 5. For the head-feeding type thresher, there was a difference in separating loss between the varieties. At the cylinder speed of 600 rpm the separating losses for the Minehikari and the Suweon 264 were 1.2% and 0.6% respectively. The separating loss of the head-feeding type thresher was not affected by the moisture content of paddy while that of the Mini-aged thresher increased with the moisture content. 6. From the analysis of the tailings return , to appeared that the tailings return mechanism didn't function properly because lots of single grains and rubbishes were unnecessarily returned. 7. Adding a vibrating sieve to the head-feeding type thresher could increase the efficiency of separation. Consequently , the tailing return mechanism would function properly since unnecessary return could be educed greatly. 8. The power required for the head-feeding type thresher was not affected by the moisture content of paddy, but the average power increased linearly with the feed rate. The power also increased with the cylinder speed.

• Journal of Korean Public Health Nursing
• /
• v.12 no.1
• /
• pp.132-146
• /
• 1998

This Study was attempted to provide the basic data necessary in the development and introduction of Home Health Nursing System by investigating the recognition and attitude level of Home Health Nursing System. The data were collected by means of questionaires presented to 74 patients who had been admitted in C general hospital in Chon Ju, from June 30, 1997. As the tool for this study, the questionares developed by Kim Yong. Soon, et al (1990) and Han Bok Hee(1993) were modified and supplemented for the aim of this study. The computer was used for data analysis. The items about the charateristics of the subjects and the attitude to the management plan of Home Health Nursing System were represented as the frequency and percentage. The standard deviation and calculation average were produced on the items related to definition, recognition, necessity, expected effect of the attitude of Home Health Nursing System and the items related to admission. The ANOVA test was .used according to the characteristics of variables to analyze the necessity and difference of Home Health Nursing System. The results of this study were as follows 1) The general characteristics of the subjects were as follows ; for sex, man, $58.1\%$ ; for age, 50-59 years, $29.7\%$ ; for the level of education, high school, $51.4\%$ ; $79.7\%$ of them were married; for the family forms, small family, $73.0\%$ ; and $68.9\%$ of them take the monthly income over 100 million won. 2) The characteristics related to admissions of the subjects were as follows ; for clinic, surgical department, $78.4\%$ ; addmission not more then 7days, $47.3\%$ ; for the operation-performance $71.6\%$ of them were experienced; for the admission route, via outpatients clinic, $54.1\%$ ; for waiting period to the admission day, 1-2 days, $71.6\%$. 3) The difficulties comming from the hospitalization were related mostly to the factor that they felt hospital life more inconvenient than home.(3.66) The reasons for the difficulties in the admission which was due to insufficient beds in the hospital was related to the concentration to the general hospital because of 'The Whole National Medical Insurance System'(4.05). 4) On the previous informations about the Home Health Nursing System, those who have heard of only the name were 42 $(56.8\%)$, and on the recognition of it, they thought that it is periodic treatment by the licenced nurses for the recovering pateints after early discharge(3.73). On the attitude about the necessity of Home Health Nursing System, they thought that it is necessary because of the increasing trend of a psychological disease by the change of environment and complexity of the social structure(4.24). On the expected effect of Home Health Nursing System, they answered that it is convinient for the family of the patient to take care of them(4.l8). 5) On the attitude to the management plan of the Home Health Nursing System, those who had intention to participate in the system in the case of systemic support were 42(56.8). In the visiting time, 'visit periodically' and 'visit when the patient needs' were $28(37.8\%)$ respectively. For the application of medical insurance, if possoble, they will use $(91.9\%)$; for the method of payment for the treatment, 'pay by the time required' was $23(31.1\%)$, for the subject of management, 'National public institute must operate' was $33(44.6\%)$. 6) The relationship between the general characteristics of the subjects and the necessity of Home Health Nursing System showed the notable difference in the age (F=3.508, P<0.05) and marrage state (F=5.402, P<.023).

• 대한공업교육학회지
• /
• v.36 no.2
• /
• pp.131-150
• /
• 2011

The purpose of this study vocational courses in general high schools in each city in order to operate efficiently. Provinces operating status and the general high school vocational courses through the regular high school vocational courses siltae analysis to identify operational problems, and that is to derive ways to improve. Operating in the desired direction, the typical high school vocational courses ilbango select students that meet the purpose of operating as one that students admit you need the correct promotion and career guidance and vocational courses ilbango teachers of vocational courses is operating correctly recognize the purpose and students with career guidance and vocational courses so that you can operate effectively at: Provincial Office-wide need to conduct a systematic study. Vocational courses also target students ilbango sosokgyo (wonjeokgyo) to be completed in the course stated in the plan for the school and the need to practice, and professional students ilbango by configuring a separate class is most preferable to operate. If the person is prime target, with each region run by creating a class needs to definitely consider. Entrusted to the agency's key performance improvements in order to improve the employment rate in the direction of promotional materials for the students selected to take advantage of college enrollment than the employment data for the students and their parents ilbango vocational courses for the purpose and intent is necessary to provide accurate information In addition, the employment rate is relatively low industrial (information) to install the school department employment, and employment representatives (industry-academia co-coordinator), and by placing career paths and industries to ensure the needs of industry, including working conditions and students who wish adjusting to the role, and industrial college (2 years), industrial (information) through the school's agreement to the aggressive promotional schemes seonchwieop hujinhak. Getting the need to encourage. Vocational courses ilbango in the new and the abolition, rather than the case of some popular course when you are away from work and there, so if the course-changing industry, new or repealed to reflect the demands of social work and careful review of how to connect carefully to decide by. Commissioned a systematic quality management in education, in terms of industry (information) schools and public vocational training institutions or private vocational school is better than school. However, 16 cities across the country. Also only five of the major cities around the school has industry information. Ilbango vocational courses at the expected continued demand. Degrees, the operation in terms of comparative advantage in many ways the school's new industry information is necessary to consider.

• 대한공업교육학회지
• /
• v.39 no.2
• /
• pp.101-121
• /
• 2014

The study aims to develop the NCS based vocational curriculum model for the practical and creative human resources. For effectiveness of the study, the study consists of literature studies of both domestic and international, contents analysis, case study, expert(9samples) consultation and review, and in-depth-interview of the three advisory members. The validity of the developed model is analyzed through mean, standard deviation and contents validity ratio(CVR). The main results of the model development in our study are as follow. First, our NCS based vocational curriculum model for the practical and creative human resources is developed with the analyses of NCS development manuals, training standard utilization and training curriculum organization manuals, NCS learning module development manual and case studies, NCS research report, NCS based curriculum pilot development resources directed toward the high schools and vocational school as well as the domestic and international literature study on career training model like NCS. Second, based on the findings of our analysis in combination with the findings from the consultations with the expert and advisory committee, total 19 sub-factors of each step and domain are extracted. The sub-factors of domain in step 1 are the competency unit, definition of competency unit, competency unit element, performance criteria, range of variable, guide of assessment, key competency; in step 2, they are subject title, subject objectives, chapter title, chapter objectives, pedagogical methods, assessment methods and basic job competence; and in step 2, they are NCS based subject matrix table, NCS based subject profile, NCS based job training curriculum table, NCS based subjects organization flowchart, NCS based job training operation plan. Third, the final model including step 3 NCS based subject profile are developed in association with the linked organizational sub-factors of step 1 and step 2. Forth, the validity tests for the final model by the step and domain yield the mean 4.67, CVR value 1.00, indicating the superior validity. Also, the means of each sub-factors are all over 4.33 with the CVR value 1.00, indicating the high validity as well. The means of the associated organizations within the model are also over 4.33 with the CVR value of 1.00. Standard deviations are all .50 or lower which are small. Fifth, based on the validity test results and the in-depth-interview of the expert and advisory committee, the model is adjusted complemented to establish final model of the NCS based vocational curriculum for the practical and creative human resources.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.210-216
• /
• 2007

A study was conducted to find mechanism and spray characteristics of a mini-sprinkler with downward spray to develop a new design type to be able to prevent drop water. The experiments were executed in a plastic greenhouse to minimize the effect of the wind. Data was collected at five different operation pressures and at 4 different raiser heights. Spray characteristics of the sprinkler such as effective radius, effective area, mean application depth, absolute maximum application depth, effective maximum application depth and coefficient of variation were determined. In order to analyze the mechanism and packing supporter of sprinkler, the numerical simulation using ABAQUS was performed. The optimum pressure for preventing drop water was determined.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.6
• /
• pp.2465-2472
• /
• 2014

Background: The American Joint Committee on Cancer (AJCC) published a new staging system ($7^{th}$ edition) in 2009. In our study, we evaluated the survival results and prognostic factors among T4 local advanced non-small cell lung cancer (LA-NSCLC) patients in a large heterogeneous group, in accordance with this new system. Materials and Methods: We retrospectively evaluated the files of 122 T4 N0-3 M0 LA-NSCLC patients, identified according to the new staging system, treated at two centers between November 2003 and June 2012. Variables correlating with univariate survival at p<0.20 were later included in multivariate Cox regression analysis. Here, selection of relevant predictors of survival was carried out in accordance with the likelihood ratio formula with p<0.05 regarded as significant. Results: The median age was 60 and the median follow-up period was 17.4 months. Median overall survival (OS) was 18.3 months, the 1 year overall survival (OS) rate was 72%, and the 5 year OS rate was 28%. Statistically significant predictors of survival were (p<0.20) ECOG-PS (Eastern Cooperative Oncology Group Performance Status), age, T4 factor subgroup, stage and primary treatment in OS univariate analysis. On multivariate analysis for OS ECOG-PS (p=0.001), diagnostic stage (p=0.021), and primary treatment (p=0.004) were significant. In the group receiving non-curative treatment, the median OS was 11.0 months, while it was 19.0 months in the definitive RT group and 26.6 months in the curative treatment group. There was a significant difference between the non-curative group and the groups which had definitive RT and curative operations (respectively p<0.001 and p=0.001) in terms of OS, but not between the groups which had definitive RT and curative operations. The median event free survival (EFS) rate was 9.9 months, with rates of 46% and 19% at 3 and 5 years, respectively. On univariate analysis of EFS rate with ECOG-PS, weight loss and staging, statistical significance was found only for thorax computerized tomography (CT)+18F-fluorodeoxy-glucose positron emission tomography-CT (PET-CT) use, stage and primary treatment (p<0.20). In multivariate analysis with EFS, only the primary treatment was statistically significant (p=0.001). In the group receiving non-curative treatment, the median EFS was 10.5 months while in the curative operation group it was 14.7 months. When all the primary treatment groups were taken into consideration, grade III/IV side effect swas observed in 57 patients (46.6%). Esophagitis was most prominent among those that received definitive radiotherapy. Conclusions: Independent prognostic factors among these 122 heterogeneous LA-NSCLC T4 N0-3 M0 patients were age at diagnosis, ECOG-PS, stage and primary treatment, the last also being a significant prognostic indicator of EFS. Our findings point to the importance of appropriate staging and a multidisciplinary approach with modern imaging methods in this patient group. In those with T4 lesions, treatment selection and the effective use of curative potential should be the most important goal of clinical care.