• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.69-74
• /
• 2023

As a chemical de-icing method, propylene glycol de-icing fluid is applicable for melting ice caused by snow and ice adhering to the lower part of high-speed rail rolling stock and bogie parts in winter. By spraying propylene-glycol de-icing fluid on high-speed rail rolling stock and bogie parts in advance to minimize snow adhesion, ice-melting efficiency can be further improved. In the case of high-speed rail rolling stock, even if propylene-glycol de-icing fluid is sprayed, the anti-icing performance is poor because the fluid is almost lost on the surface of the vehicle when operating at high speed. In this study, in order to prevent freezing caused by snow and ice adhering to the lower part of high-speed rail rolling stock and bogie parts, we have investigated the properties of propylene-glycol de/anti-icing fluid containing water-repellent agents that prevent surface freezing. We tried to find the optimal component for de/anti-icing fluid for high-speed rail rolling stock by evaluating the ice melting performance, contact angle, and anti-icing performance according to the types of water-repellent agent. As a result of the evaluation, it was confirmed that an de/anti-icing fluid containing an ethoxysilane-type water repellent agent was most suitable.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.25-33
• /
• 2020

This study was based on the research contents of previous studies. and After operatively defining public culture and arts institutions in terms of combining the characteristics of public institutions and culture and arts, the necessity of analyzing the priority of performance evaluation indicators was raised in accordance with this. The results of priority analysis based on the AHP axiom are as follows. The priorities for the performance evaluation index of public culture and arts institutions were in the order of artistry, expertise, marketing, publicity, organizational management, exchange and cooperation, management efficiency, operating system, and convenience. Based on the analysis results, the following implications were presented. First, it is necessary to first pay attention to the items of artistry that appear as the highest priority and seek strategies. Second, it is necessary to put a variety of experts in the original plan so that the audience and the public can have a high interest in this. However, in order not to exceed the 10 items recommended by the AHP axiom, we had to intentionally limit the evaluation items. Therefore, it is necessary to analyze priorities by deriving various evaluation items in subsequent studies.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.3
• /
• pp.47-54
• /
• 2022

Purpose: This study presents the analysis on space usage of delivery departments in regional public hospitals. The results intention is to achieve improvement of the delivery environment for the mothers and newborns regarding exposure prevention and efficient infection control. The purpose of this study is to provide fundamental data for architectural plans and guidelines for the delivery department. Method: The investigation and analysis were based on research papers, legal systems, public medical statistical data, and the architectural floor plan drawing. For research, 20 regional public hospitals with an operating delivery room were excluded. Regarding data accessibility, 15 regional public hospitals were selected. Results: To overcome the increased vulnerability of the delivery department, the research results of basic data is provided for the establishment to address urgent needs and rapid response. Thus, the research results are as follows: Firstly, the delivery department needs to respond promptly according to the type of patients. For example, in a case of emergency surgery, a connected circulation plan with the related departments is needed. Secondly, for the environment of the delivery area, alleviating anxiety is imperative for pregnant patients and guardians, labor, childbirth, and recovery. Therefore, these needs must be addressed for treatment space and circulation. Lastly, the delivery department is classified into three areas for analysis: access area, treatment area, and support area. In most of the delivery departments of the 15 selected hospitals, there is no space for the access and support area except for the labor and delivery rooms in the treatment area. For the access area, a waiting area, changing room for pregnant women and guardians, and a storage space for contaminated linens are required for infection prevention, safety, and efficiency. For the treatment area, childbirth processes and circulation should have space reserved for labor, delivery, recovery, examination, and treatment. In preparation for an emergency during childbirth, emergency response measures and supporting space needs to be established. For the support area, circulation and rooms are to be designed for medical staff support, activity space, storage and transportation of equipment, and urgent medical treatment. Implications: Along with the low fertility rate and the decrease of medical institutions that operate delivery departments, for the purpose of establishing a public medical service system and a healthy medical environment for mothers and newborns, the researched information demonstrates basic data on space plan of delivery departments in regional public hospitals.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.276-290
• /
• 2023

Several efforts in Korea are currently underway with the goal of commercializing autonomous vehicles. Hence, various studies are emerging on autonomous vehicles that drive safely and quickly according to operating guidelines. The current study examines the path search of an autonomous vehicle from a microscopic viewpoint and tries to prove the efficiency required by learning the lane change of an autonomous vehicle through Deep Q-Learning. A SUMO was used to achieve this purpose. The scenario was set to start with a random lane at the starting point and make a right turn through a lane change to the third lane at the destination. As a result of the study, the analysis was divided into simulation-based lane change and simulation-based lane change applied with Deep Q-Learning. The average traffic speed was improved by about 40% in the case of simulation with Deep Q-Learning applied, compared to the case without application, and the average waiting time was reduced by about 2 seconds and the average queue length by about 2.3 vehicles.

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.445-451
• /
• 2021

In this study, we described the production of an antibody to living modified organisms (LMOs) containing the gene encoding for 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) from Agrobacterium tumefaciens strain CP4 EPSPS provides resistance to the herbicide glyphosate (N- (phosphonomethyl) glycine). These LMOs were approved and have recently been used in the feed, food production, and processing industries in South Korea. Highly efficient monoclonal antibody (mAb) production is crucial for developing assays that enable the proper detection and quantification of the CP4 EPSPS protein in LMOs. This study describes the purification and characterization of recombinant CP4 EPSPS protein in E. coli BL21 (DE3) based on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and matrixassisted laser desorption/ionization time-of-flight mass spectrometry. The production of mAbs was undertaken based on the standard operating procedure of Abclon, Inc.(South Korea), and the purity of the mAbs was assessed using SDS-PAGE. The following five mAb clones were produced: 2F2, 4B9, 6C11, 10A9, and 10G9. To verify the efficiency and specificity of the five developed mAbs, we performed Western blotting analysis using the LM (living modified) cotton crude extracts. All mAbs could detect the CP4 EPSPS protein in the LM cotton traits MON1445 and MON88913 with high specificity, but not in any other LM cottons or non-LM cottons. These data indicate that these five mAbs to CP4 EPSPS could be successfully used for the further development of antibody-based detection methods to target CP4 EPSPS protein in LMOs.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.2
• /
• pp.157-168
• /
• 2009

In this paper, a photovoltaic system is designed with a step up chopper and single phase PWM(Pulse Width Modulation) voltage source inverter. Where proposed Synchronous signal and control signal was processed by one-chip microprocessor for stable modulation. The step up chopper operates in continuous mode by adjusting the duty ratio so that the photovoltaic system tracks the maximum power point of solar cell without any influence on the variation of insolation and temperature because solar cell has typical voltage and current dropping character. The single phase PWM voltage source the inverter using inverter consists of complex type of electric power converter to compensate for the defect, that is, solar cell cannot be developed continuously by connecting with the source of electric power for ordinary use. It can cause the effect of saving electric power. from 10 to 20[%]. The single phase PWM voltage source inverter operates in situation that its output voltage is in same phase with the utility voltage. In order to enhance the efficiency of photovoltaic cells, photovoltaic positioning system using sensor and microprocessor was design so that the fixed type of photovoltaic cells and photovoltaic positioning system were compared. In result, photovoltaic positioning system can improved 5% than fixed type of photovoltaic cells. In addition, I connected extra power to the system through operating the system voltage and inverter power in a synchronized way by extracting the system voltage so that the phase of the system and the phase of single-phase inverter of PWM voltage type can be synchronized. And, It controlled in order to provide stable pier to the load and the system through maintaining high lurer factor and low output power of harmonics.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.9
• /
• pp.67-74
• /
• 2009

The presence informations of users of Instant Messaging System In SIP(Session Initiation Protocol) environment are obtained by presence server, and message waiting indication event package is used to provide various message informations stored in the message server. In this paper, I have proposed a new method in which Extended CPL(Call Processing Language) has been applied to presence service to provide various functions to the users. A user of Instant Messaging System subscribes presence information and CPL scripts which describe his requirements, and presence server executes CPL scripts when instant messaging service is subscribed and notifies presence informations. Several CPL operation tags are added, and therefore various services which combine presence service and call processing can be provided in this system. Furthermore a new method has been proposed in which message server and presence server correlate in Instant Messaging System. When changes of message status informations occur, message server send these informations to the presence server, and presence server provides both presence informations and message status informations in extended format. As this method can be a substitute for message waiting indication event package, the system operating efficiency can be increased. The performance of this proposed system is evaluated by experiments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4B
• /
• pp.329-337
• /
• 2009

In this study we briefly introduce the electronic float system based on the GPS and RF communication technology and present some field application results. The system is capable of operating 15 floats simultaneously for making discharge measurement. Since the electronic floats (EFs) acquire flow paths, they can improve velocity measurement accuracy up to 10%. Additionally, measured velocities by the EFs show good agreement with those by an ADCP. Relative difference in sub-section area calculated by the electronic and conventional float methods is -79~71% and, due to convergent tendency of floats flowing along near banks, it increases much larger. It is possible to improve accuracy up to 5~6% in making discharge measurement by the electronic floats at site with irregular flow paths and section arrangement. The electronic float system is capable of calculating more accurate velocity and section area using position information based on GPS. By real-time measurement of velocity, cross-section area and discharge, the electronic float system is expected to reduce manpower and improve accuracy, rapidity and efficiency of flood discharge measurements.

• Convergence Security Journal
• /
• v.22 no.4
• /
• pp.161-168
• /
• 2022

After the corona virus, as non-face-to-face services are activated, domain services that guarantee integrity by embedding sensing information of the Internet of Things (IoT) with block chain technology are expanding. For example, in areas such as safety and security using CCTV, a process is required to safely update firmware in real time and to confirm that there is no malicious intrusion. In the existing safe security processing procedures, in many cases, the person in charge performing official duties carried a USB device and directly updated the firmware. However, when private blockchain technology such as Hyperledger is used, the convenience and work efficiency of the Internet of Things environment can be expected to increase. This article describes scenarios in how to prevent vulnerabilities in the operating environment of various customers such as firmware updates and device changes in a non-face-to-face environment. In particular, we introduced the optimal blockchain technique for the Internet of Things (IoT), which is easily exposed to malicious security risks such as hacking and information leakage. In this article, we tried to present the necessity and implications of security management that guarantees integrity through operation applying block chain technology in the increasingly expanding Internet of Things environment. If this is used, it is expected to gain insight into how to apply the blockchain technique to guidelines for strengthening the security of the IoT environment in the future.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.817-823
• /
• 2023

Manufacturing plants face the challenge of reducing energy use in response to climate change. Reducing energy consumption can be seen as one of the most important issues, such as reducing production costs and improving efficiency. Among manufacturing industries, the increase in energy consumption in the food industry is gradually increasing along with the improvement of the standard of living and the increase in population. In order to save energy in food processing plants, it is important to identify and analyze energy consumption characteristics in energy-consuming processes. Prior to this, it is necessary to monitor and analyze existing energy consumption to derive reduction measures. In this study, a small and medium-sized food processing plant producing processed meat products was used as a case study to identify and analyze the energy consumption structure at typical cycle/stage level of the batch heating process. From this, we tried to establish realistic and quantitative goals that can be obtained under individual process operating conditions. The results of this study will be used as basic data for the development of diffusion and pervasive energy saving FEMS technology for common core processes of food factories of small and medium-sized enterprises in the future.