• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1256-1267
• /
• 2017

A fault tolerant structure and its corresponding control strategy for electromagnetic stirring power supplies are proposed in this paper. The topology structure of the electromagnetic stirring power supply contains two-stages. The fore-stage is the PWM rectifier. The back-stage is the fault tolerant inverter, which is a two-phase three-bridge orthogonal inverter circuit while operating normally. When the power switch devices in the inverter are faulty, the structure of the inverter is reconfigured. The two-phase half bridge inverter circuit is constructed with the remaining power switch devices and DC-link capacitors to keep the system operating after cutting the faulty power switch devices from the system. The corresponding control strategy is proposed to let the system work under both normal and fault conditions. The reliability of the system is improved and the requirement of the electromagnetic stirring process is met. Finally, simulation and experimental results verify the feasibility of the proposed fault tolerant structure and corresponding control strategy.

• Journal of information and communication convergence engineering
• /
• v.10 no.1
• /
• pp.61-65
• /
• 2012

Many public organizations have been adopting and operating various servers. These servers run on Windows, Unix, and Linux operating systems that generally use less than 10% of their capacity. For migrating a public organization to cloud computing, we must first virtualize the server environment. This article proposes a strategy for server virtualization that the National IT Industry Promotion Agency (NIPA) has done and describes the effects of a public organization migrating to cloud computing. The NIPA Computer Center planned an effective virtualization migration on various servers. This project of virtualization migration was conducted with the existing policy of separate x86 servers and Unix servers. There are three popular approaches to server virtualization: a virtual machine model, a paravirtual machine model, and virtualization at the operating system layer. We selected a VMware solution that uses the virtual machine model. We selected servers for virtualization in the following manner. Servers were chosen that had the highest rate of service usage and CPU usage and had been operating for five years or more. However, we excluded servers that require 80% or greater rates of CPU usage. After adopting the server virtualization technique, we consolidated 32 servers into 3 servers. Virtualization is a technology that can provide benefits in these areas: server consolidation and optimization, infrastructure cost reduction and improved operational flexibility, and implementation of a dual computing environment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.81-89
• /
• 2014

This study researched on the effect of HP/LP-EGR system to improve fuel consumption of Low Temperature Combustion Engine. Firstly, low temperature combustion engine with HP/LP-EGR system was established using 6.0L wastegate turbocharger HDDI engine. And suppliable EGR rate of the engine was proven to be enough to realize stable low temperature combustion. Then, optimum operating strategy was founded to develop fuel consumption of the engine. Control parameters were HP/LP-EGR valve and IPCV(Intake Pressure Control Valve) duty. Experiments method was that characteristics of the engine were measured and analyzed according to HP/LP-EGR strategies while EGR rate was fixed. Operating range for the strategy were divided into three parts, low load for low temperature combustion, high load for conventional diesel combustion, and transient condition. Finally, with the above strategy of this study, BSFC of the engine was improved about 2% compared to the base engine, and emission level, NOx and PM, met Tier4Final emission regulation.

• 한국전기화학회:학술대회논문집
• /
• 2002.10a
• /
• pp.7-7
• /
• 2002

• Journal of Distribution Science
• /
• v.15 no.8
• /
• pp.55-64
• /
• 2017

Purpose - PB products at convenience stores take up about 20% of all products, and strategies for differentiation from other companies and brand image building are very important. This study would investigate the strategy for differentiating PB products and successful brand building strategy, focusing on BGF Retail that is operating 'CU', the leader in the convenience store industry in Korea. Research design, data, and methodology - This study would attempt to make an exploratory approach to PB products limited to those in convenience stores. As a research subject, this study chose BGF Retail, the operator of CU, which is the leader in the convenience store industry in Korea and chose the case study method in order to examine the strategy for differentiating PB products in convenience stores more in depth. For this purpose, this study collected materials such as papers, newspaper articles and various reports on convenience store-related PB products and conducted an in-depth study including more practical contents through an interview with CU workers. Results - CU pursued the diversity of PB products and has had the diversity of products, more than 120 kinds. It founded a product research institute and has been in charge of the differentiation strategy from planning products to launching them. Changing the target layer of consumers to those in middle age of the 40s-50s, it succeeded in the strategy expanding the consumer class. In the long run, despite it changed the name of the company, it has built a successful image, and both revenue and operating profit have continuously grown up. Conclusions - In results, CU has reset the changing main target population, and the product research institute succeeded in the innovation of products, reflecting new trends the customers want. Through this study, the practical implications could be provided for competitors.

• Journal of Mechanical Science and Technology
• /
• v.19 no.4
• /
• pp.1018-1026
• /
• 2005

The proton exchange membrane (PEM) fuel cell system consisting of stack and balance of plant (BOP) was modeled in a MATLAB/Simulink environment. High-pressure operating (compressor type) and low-pressure operating (air blower type) fuel cell systems were con­sidered. The effects of two main operating parameters (humidity and the pressure of the supplied gas) on the power distribution characteristics of BOP and the net system efficiency of the two systems mentioned above were compared and discussed. The simulation determines an optimum condition regarding parameters such as the cathode air pressure and the relative humidity for maximum net system efficiency for the operating fuel cell systems. This study contributes to get a basic insight into the fuel cell stack and BOP component sizing. Further research using muli­object variable optimization packages and the approach developed by this study can effectively contribute to an operating strategy for the practical use of fuel cell systems for vehicles.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.2
• /
• pp.61-71
• /
• 2005

The study reported deals with investigating the feasibility of control strategy for a serial rigid link manipulator that applies impulsive torques at the joints. The strategy is illustrated for a planar three rigid link manipulator. An impulse-based concept which uses successive torque impulses on rigid link as the controller for motion correction was introduced. This control strategy was tested over the entire trajectory to demonstrate that the tracking error could be reduced effectively. The best condition for minimizing the tracking error with the least impulse input at each joint is investigated by considering one design and one operating parameter. The first was the damping in the system, and the second was the sampling time during operation. The results show that this approach can provide useful guidance for the design and control of robot manipulators that require minimum impulse feedback for accurate tracking.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1182-1187
• /
• 2014

This paper proposes an energy management strategy and adaptive control for superconducting magnetic energy storage (SMES) in a distribution power system with a grid-connected photovoltaic (PV) farm. Application of the SMES system can decrease the output power fluctuations of PV system effectively. Also, it can control the real and reactive powers corresponding to the scheduled reference values with adequate converter capacity, which are required at a steady-state operating point. Therefore, the adaptive control strategy for SMES plays a key role in improving the system stability when the PV generation causes uncertain variations due to weather conditions. The performance of proposed energy management strategy and control method for the SMES is then evaluated with several case studies based on the PSCAD/EMTDC$^{(R)}$ simulation.

• Journal of Power Electronics
• /
• v.6 no.4
• /
• pp.279-289
• /
• 2006

This paper presents a neural network based adaptive dead-time compensation strategy for an inverter fed permanent magnet synchronous motor drive. The neural network is used for identifying the dead-time compensation time (DTCT) that includes an equivalent dead-time, turn-on/off time and on-state voltage components of the voltage source inverter. In order to train the neural network, desired DTCTs for eight operating points are prepared as training data. The trained neural network can identify a desired DTCT for any operating point because it has the capability of the interpolation. The accuracy of the identified DTCT is experimentally confirmed by comparing the calculated active power with a measured one.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.833-837
• /
• 1998

This paper presents preliminary findings regarding a modeling framework under development for use in a multi-attribute decision model for advanced emergency operating procedures(EOPs). This model provides a means for optimal decision making strategy for advanced emergency operating procedures conceptualizing the dynamic coordination of responsibilities and information in the human system interactions with advanced reactor systems. For the purpose of evaluation of the applicability of this modeling framework, an empirical case study for a post-cooldown strategy during an steam generator tube rupture (SGTR) accident was carried out. As a result, it was found empirically that the multi-attribute decision model is a useful tool for establishing advanced EOPs that reduce the operator's cognitive and decision making burden during the accident mitigation process.