• 한국유체기계학회 논문집
• /
• 제18권6호
• /
• pp.81-85
• /
• 2015

The purpose of this study is to evaluate energy savings for inverter driving multi-stage centrifugal pump. Variable speed driving pump system has high efficiency compared with constant speed driving pump system. Because of difficulty to estimate operating efficiency of variable speed driving pump system, energy saving rates are used to replace operating efficiency. energy saving rates are calculated from pump input power and pump duty cycle. But another researches have used pump duty cycles of each season for energy saving rate. In this study, for estimating energy saving rate more high accuracy, pump duty cycles are measured for 1 year. pump duty cycles, depending on the season and be classified according to the weekday/weekend or during the week day. By this pump duty cycles, Energy saving rate is calculated appropriately.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.97-97
• /
• 2000

In this thesis, the metastable state diamond thin films have been deposited on Si substrates from methane-hydrogen and oxygen mixture using Microwave Plasma Enhanced Chemical Vapor deposition (MWPCVD) method. Effects of each experimental parameters of MWPCVD including methane concentrations, oxygen additions, operating pressure, deposition time, etc. on the growth rate and crystallinity were investigated. SEM, XRD, and Raman spectroscopy were employed to analyze the growth rate and morphology, crystallinity and prefered growth direction, and relative amounts of diamond and non-diamond phases respectively. As a methane concentration below 4%, the deposited films having well-defined facets could be obtained. As the methane concentration increases over 4%, the shape of films gradually changed into a amorphos form. The best crystallinity of the film at 3% in the Raman spectroscopy. Addition of oxygen to the methane-hydrogen mixture gave an improved film crystallinity at 50% oxygen concentration due to its more effectiveness in the selective removal of the non-diamond phased compared to the of H atom. on the contrary, the growth rate generally decreased by oxygen to from the more stable CO and CO2 is responsible for such an effect. Upon increasing the operating pressure and time, increased of growth rate and crystallinity were increased simultaneously.

• 유기물자원화
• /
• 제8권1호
• /
• pp.97-102
• /
• 2000

음식물쓰레기 발효건조장치의 가동온도는 발효물질의 분해속도 및 발효물질의 이 화학성 뿐만 아니라 장치의 가동에 소요되는 에너지 양에 크게 영향을 미친다. 따라서 한번에 100kg의 음식물쓰레기를 발효건조시킬 수 있는 시판되는 발효건조기를 사용하여 가동온도를 35, 45, 55와 $70^{\circ}C$에서 가동하면서 발효물질의 분해속도 및 이 화학적 특성의 변화를 조사하였다. 분해속도는$35^{\circ}C$와 $70^{\circ}C$에서 가장 빨랐으며 모든 온도에서 가동초기 10시간 내에 급격하게 분해되는 비슷한 양상을 보였다. 온도가 높을수록 분해가 빨랐다. 가동기간에 따른 발효물질의 pH는 가동온도 $55^{\circ}C$와 $70^{\circ}C$에서 빠르게 증가하였다. 발효물질의 질소함량은 가동기간에 따라 별다른 경향을 나타내지 않았다. 발효물질 중 $P_2O_5$와 CaO함량은 가동기간에 따라 증가하였으나 MgO, $K_2O$ 와 NaCl의 함량은 축적되지 않았다. 구리의 함량은 100mg/kg(건조물질 함량)이었으며 Cd, Pb 및 Cr은 분석한계 이하이었다.

• 한국수소및신에너지학회논문집
• /
• 제28권4호
• /
• pp.384-391
• /
• 2017

Effects of operating variables on solid circulation rate were measured and discussed using two-interconnected circulating fluidized bed system at ambient temperature and pressure. OCN 706-1100 particles were used as oxygen carrier. The measured solid circulation rates increased as the lower loop seal gas flow rates and the solid height in the fuel reactor increased. Suitable operating conditions to avoid choking of the air reactor were confirmed. Continuous long-term operations of steady-state solid circulation were also demonstrated at two different conditions based on the operating window.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.114-119
• /
• 1999

When NaOCl was generated and put into sea-water cooling machine in order to overcome the biological hindrances against sea-water cooling machine, it was converted into metallic ion, particularly Ca and Mg, as a hydrate in sea-water and is to stick to electrolyte as a side reaction. This phenomena make the distance between the electrolytes narrow to decrease the flow rate, which induces the local vortex flow which erodes the pole plate. Moreover, this increases the resistance of the electrolyte as well as voltage to decrease the electrolytic efficiency, which has curtailed a chlorine yield and caused a pole plate cut. We are able to overcome these problems by chemical cleaning and intend to extend the life-time of electrolyte and to increase output of the sea-water electrolysis facilities by studying optimal policy regarding chemical cleaning of electrolytic cell. Cleaning time of electrolytic facilities is determined when both increase in electrolytic efficiency and decrease in pole-plate voltage are 10%. At this time as operating current of electrolytic facilities is high, operating time is diminished. Whereas, parameter of end point determination according to cleaning is Mg ionic concentration in solution. When we use Cleaner as a 7wt% HCl, cleaning time is about 80min proper. We are able to maintain pole plate performance by protecting against pole plate cut by means of electrolytic by-product, improve operating rate of facilities, and cut down on maintenance expenditure after acidic cleaning.

• 환경위생공학
• /
• 제18권3호통권49호
• /
• pp.48-58
• /
• 2003

To obtain the preliminary design data for combustion of paper sludges, decomposition characteristics and combustion kinetics of paper sludges reactor have been determined in a TGA reactor. Also, the combustion characteristics of paper sludges have been determined in a fluidized bed reactor. The data obtained from the TGA reactor indicate that dewatering of paper sludge is terminated at temperature below 130${\circ}$C. With heating rate of 20${\circ}$C/min, combustion is terminated at temperature below 340${\circ}$C .The combustion rate is found to be first order with respect to temperature and oxygen concentration. Activation energies for paper wastes are found to be 570, 700, 2600, 4600 Kcal/mole, respectively. The calcination conversions were investigated with the operating temperature and residence time. In this investigation, it was found that calcination conversion was affected by the operating temperature and residence time. The optimum conditions of operating temperature and mean residence time were 850${\circ}$C and 6 minutes of respectively.

• 산업공학
• /
• 제11권3호
• /
• pp.23-40
• /
• 1998

In this paper, a method to determine the optimal configuration of operating policies in an integrated-automated manufacturing system using the Taguchi method and computer simulation experiments is presented. An integrated-automated manufacturing system called direct-input-output manufacturing system(DIOMS) is described. We only consider the operational aspect of the DIOMS. Four operating policies including input sequencing control, dispatching rule for the storage/retrieval(S/R) machine, machine center-based part type selection rule, and storage assignment policy are treated as design factors. The number of machine centers, the number of part types, demand rate, processing time and the rate of each part type, vertical and horizontal speed of the S/R machine, and the size of a local buffer in the machine centers are considered as noise factors in generating various manufacturing system environment. For the performance characteristics, mean flow time and throughput are adopted. A robust design experiment with inner and outer orthogonal arrays are conducted by computer simulation, and an optimal configuration of operating policies is presented which consists of a combination of the level of each design factor. The validity of the optimal configurations is investigated by comparing their signal-to-noise ratios with those obtained with full factorial designs.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.846-855
• /
• 1987

본 연구에서는 실용적 설계및 이론해석에 필요한 동적 거동에 관한 현상규명 및 기초자료를 제공하기위해, 기하학적 형상변화에 따른 맥동연소의 안정성 및 흡입공 기량의 측정을 통한당량비의 범위를 관찰하고, 연소실과 배기관, 공기유입관, 연료노 즐실에서의 압력을 각각 동시측정해서 동적거동에 관해 고찰하고, 작동주파수에 관한 간단한 실험식의 확립과 추력성능에 관한 실험을 행했다.

• 설비공학논문집
• /
• 제25권3호
• /
• pp.131-136
• /
• 2013

The present study has conducted cycle design and control technology of a water source VRF heat pump system. Previously, study of a simultaneous heating and cooling in an air source VRF heat pump system has been conducted. However, performance data and design methods for simultaneous heating and cooling in a water source VRF heat pump system are limited in the literature, due to various system parameters and operating conditions. In this study, the operating characteristics and performances of a simultaneous heating and cooling heat pump system are carried out, in simultaneous operation modes. Control logics of an EEV are developed for flow rate control to the outdoor unit, and are verified. When the control logics are applied, the simultaneous cooling and heating performances are sufficiently achieved, and system COPs are increased by up to 23.4%.

• 한국대기환경학회지
• /
• 제23권5호
• /
• pp.557-562
• /
• 2007

The purpose of this paper is to investigate the reforming characteristics and maximum operating condition for the hydrogen production by methane reforming using the compression ignition engine induced partial oxidation. An dedicated compression engine used for methane reforming was decided operating range. The partial oxidation reforming was investigated with oxygen enrichment which can improve hydrogen production, compared to general reforming. Parametric screening studies were achieved as $O_2/CH_4$ ratio, total flow rate, and intake temperature. When the variations of $O_2/CH_4$ ratio, total flow rate, and intake temperature were 1.24, 208.4 L/min, and $400^{\circ}C$, respectively, the maximum operating conditions were produced hydrogen and carbon monoxide. Under the condition mentioned above, synthetic gas were $H_2\;22.77{\sim}29.22%,\;CO\;21.11{\sim}23.59%$.