• Title/Summary/Keyword: Opening-system

Search Result 1,571, Processing Time 0.031 seconds

The Development of 25.8kV 25kA Outdoor Type GCB (25.8kV 25kA 옥외용 GCB 개발)

  • Yoon, K.S.;Song, W.P.;Lee, C.H.;Noh, C.W.
    • Proceedings of the KIEE Conference
    • /
    • 1994.07a
    • /
    • pp.214-215
    • /
    • 1994
  • The VCB(Vacuum Circuit Breaker), which has been used in power distribution system, have prevented the performance of the phase modifying equipment (Condenser Bank and Shunt Reactor) and the important parts in the electric power system because of the transient voltage in opening and closing circuit. So, we developed the 25.8kV $SF_6$ gas GCB(GAS Circuit Breaker), which had the few occurance of the surge in opening & closing circuit and had the high reliability, based in our own technology.

  • PDF

Analysis on interaction of Ground and support using Ground response curve for tunnel design (지반응답곡선을 이용한 지반과 지보재의 상호작용 분석)

  • Ahn, Tae-Hun;Ahn, Sung-Hak;Lee, Song
    • Proceedings of the KSR Conference
    • /
    • 2002.10b
    • /
    • pp.1059-1064
    • /
    • 2002
  • The behavior of an opening and the performance of support system depend upon the load-deformation characteristics of ground and support as well as of the manner and of timing of support installation. The load-deformation characteristics of ground and support are derived by the interaction between ground and support. The interaction between ground and support is qualitatively illustrated by a ground response curve. The behavior of an opening and the performance of support system depend upon the load-deformation characteristics of ground and support as well as of the manner and of timing of support installation. The interaction between ground and support is qualitatively illustrated by a ground response curve. The convergence-confinement method don't need the basic assumptions for a mathematical model. Also This is applicable to general tunnel. Consequently the stability of tunnel must be qualitatively investigated by a ground response curve and quantitatively adjudged by a numerical analysis for the reasonable design of tunnel.

  • PDF

Sensibility Evaluation of Function Sounds on Mobile Phones (휴대폰 기능음별 감성평가)

  • Kim, Jae-Kuk;Cho, Am
    • Journal of the Ergonomics Society of Korea
    • /
    • v.27 no.3
    • /
    • pp.61-69
    • /
    • 2008
  • The purpose of this study was to examine the effects of sensibility and compatibility from function sounds of mobile phones. For this purpose, the present study extracted sensibility adjectives and carried out sensibility evaluation to identify the sensibility factors in the function sounds of mobile phones. And 65 sound sources out of six categories were investigated for 27 subjects. The result showed that two dominant sensibility factors were the duration and the melody pattern of the sound sources. The compatibilities of opening and closing sounds were evaluated lowly with short duration and quick tempo. Especially, the most of the subjects preferred more attractive and longer opening sounds than other function sounds. Another finding was that the short sounds with melodies were preferred for cancellations and alerts, unliked the commonly used sound sources in industry and other traditional electronic products.

A study on the Beehive Door Opening and Closing System using a Hornet Sound Analysis

  • Kim, Joon Ho;Han, Wook;Chung, Wonki
    • International Journal of Advanced Culture Technology
    • /
    • v.10 no.3
    • /
    • pp.393-396
    • /
    • 2022
  • Recently, rapid climate change has had a significant impact on the ecosystem of honeybees. In addition, the problem of Vespa Hornets invasion of colonies has a fatal impact on the bee ecosystem, independent of climate change. Especially in late summer. This study relates to a method for preventing Vespa Hornets attack. In this study, we developed a Vespa Hornets sound detection device was developed by collecting and analyzing the sound of a Vespa Hornets and applying IoT technology. The developed device detects the sound of a Vespa Hornets when Vespa Hornets appears around the hive of the bees and sends a signal to automatically close the door of the beehive. The device that receives the signal drives the motor that controls the honeycomb door to close the beehive door. The Vespa Hornets sound detection device operates until no Vespa Hornets sound is detected. The system developed by us is expected to be installed in the beehives of actual beekeeping farms to dramatically reduce the damage caused by by Vespa Hornets.

Effect of Recirculated Exhaust Gas upon Performance and Exhaust Emissions in Power Plant Boilers with FGR System (FGR 시스템 공력 플랜트 보일러의 성능 및 배기 배출물에 미치는 재순환 배기의 영향)

  • Bae, Myung-Whan;Jung, Kwong-Ho;Choi, Seung-Chul;Cho, Yong-Soo;Kim, Yi-Suk
    • Proceedings of the KSME Conference
    • /
    • 2004.11a
    • /
    • pp.1686-1691
    • /
    • 2004
  • The effect of recirculated exhaust gas on performance and exhaust emissions with FGR rate are investigated by using a natural circulation, pressurized draft and water tube boiler with FGR system operating at several boiler loads and over fire air(OFA) damper openings. The purpose of this study is to apply the FGR system to a power plant boiler for reducing $NO_{x}$ emissions. To activate the combustion, the suction damper of two stage combustion system installed in the upper side of wind box is opened by handling the lever between $0^{\circ}$ and $90^{\circ}$ , and the OFA with 0 to 20% into the flame is supplied, as the combustion air supplied to burner is reduced. It is found that the fuel consumption rate divided by evaporation rate does not show an obvious tendency to increase or decrease with rising the FOR rate, and $NO_{x}$ emissions are decreased, at the same OF A damper opening, as FOR rates are elevated and boiler loads are dropped.

  • PDF

A FLUID TRANSIENT ANALYSIS ON THE PIPE NETWORK OF BIPROPELLANT PROPULSION SYSTEM WITH AN UNSTEADY FRICTION (이원추진제 추진시스템의 배관망에 대한 비정상 마찰을 고려한 과도기유체 해석)

  • Chae, Jong-Won;Han, Cho-Young;Kim, Jung-Hoon;Jun, Hyoung-Yoll
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2010.05a
    • /
    • pp.487-490
    • /
    • 2010
  • A fluid transient analysis on the pipe network of bipropellant propulsion system is conducted through numerical parametric studies in which unsteady friction results are compared with quasi-steady friction results and also show the pressure drop results during the liquid apogee engine firing. The fluid transient analysis program has verified through comparing with the original Zielke model, the full and recursive convolution model and quasi-steady model as a reference. And the pressure drop program also has verified through comparing with results of the well-known program, EPANET2. The bipropellant propulsion system has two different fluids as fuel and oxidizer, and mostly they are hypergolic combination so that the valve opening and closing of the thrusters, that cause the pressure waves, shall take place simultaneously to get proper performance. The different physical properties of the fuel and oxidizer result in the different responsive to the same valve opening and closing. The response results may be helpful to know the characteristics of the bipropellant propulsion system and design it.

  • PDF

Improvement of Pressurizer PROV System through Micro-Computer and PRA (마이크로 컴퓨터와 확률론적 리스크 평가를 통한 가압기 보호계통의 설계 개선)

  • Jong Ho Lee;Soon Heung Chang
    • Nuclear Engineering and Technology
    • /
    • v.17 no.4
    • /
    • pp.302-316
    • /
    • 1985
  • Small break LOCA caused by a stuck-open PORV is one of the important contributors to nuclear power plant risk. This paper deals with the design of a pressurizer surveillance system using microcomputer to prevent the malfunction of system and has assessed the effect of this improvement through Probabilistic Risk Assessment (PRA) method. Micro-computer diagnoses the malfunction of system by a process checking method and performs automatically backup action related to each malfunction. Owing to this improvement, we can correctly diagnose “Spurious Opening”, “Fail to Reclose” and “Small break LOCA” which are difficult for operator to diagnose quickly and correctly and reduce the probability of a human error by an automatic backup action.

  • PDF

Evaluation of the needed CY Area in Pusan Port under the On Dock Operation System (부산항의 On Dock 운영화에 따른 소요 CY 면적 산정에 대하여)

  • Yeo, G.T.;Koo, J.Y.
    • Journal of Korean Port Research
    • /
    • v.11 no.2
    • /
    • pp.157-172
    • /
    • 1997
  • To develop the port productivity and effictiveness, the introduction of the On Dock Operating System in Pusan Container Terminals has to be considered and the present Off Dock CY be closed step by step. This work aims to evaluate the needed CY area in Pusan Port under the On Dock Operating System. This researching flow is as follows. Firstly, estimate total sea-borne container cargo volumes in Korea and distribute them to all container terminals according to the past trends and the planned port development. Secondly, estimate the average period and the average tiers stored at On Dock CY in case of On Dock Operating System. Thirdly caculate the needed CY Area to handle the distributed container cargo volume under the On Dock Operating System. Finally, the following results are obtained. (1) In 1998, opening the Gamman Terminal, 827 thousands cubic meters are insufficient. (2) In $2001\sim2004$, the insufficiency of needed CY Area will be maximized and estimated to be 936 thousands cubic meters in 2001. (3) In $2005\sim2011$, opening the Gadu Terminal, the insufficiency of needed CY Area will be decreased and estimated to be 240 thousands cubic meters in 2011.

  • PDF

Evaluation of cyclic behavior of lateral load resisting system with eccentric brace and steel plate

  • Reza Khalili Sarbangoli;Ahmad Maleki;Ramin K. Badri
    • Structural Engineering and Mechanics
    • /
    • v.89 no.3
    • /
    • pp.239-252
    • /
    • 2024
  • Steel plate shear walls (SPSWs) are classified as lateral load-resisting systems. The feasibility of openings in the steel plate is a characteristic of SPSWs. The use of openings in SPSWs can lower the load capacity, stiffness, and energy dissipation. This study proposes a novel form of SPSWs that provides convenient access through openings by combining steel plates and eccentrically braced frames (EBFs). The proposed system also avoids a substantial reduction in the strength and stiffness. Hence, various geometric forms were analyzed through two different structural approaches. Groups 1, 2, and 3 included a steel EBF with a steel plate between the column and EBF in order to improve system performance. In Group 4, the proposed system was evaluated within an SPSW with openings and an EBF on the opening edge. To evaluate the performance of the proposed systems, the nonlinear finite element method (NL-FEM) was employed under cyclic loading. The hysteresis (load-drift) curve, stress contour, stiffness, and damping were evaluated as the structural outputs. The numerical models indicated that local buckling within the middle plate-EBF connection prevented a diagonal tension field. Moreover, in group 4, the EBF and stiffeners on the opening edge enhanced the structural response by approximately 7.5% in comparison with the base SPSW system.