• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1129-1136
• /
• 2009

The paper presents the performance characteristics for a cooling system using EEV. The water cooler was used to reduce thermal deformation and contraction due to high speed of machine tools and the EEV was used for capacity control for water cooler. The apparatus was designed for hot-gas bypass system which a hot-gas can flows from outlet of compressor to the inlet of evaporator. This experiment is the intermediary study for precise temperature control through PID control. The results show that the evaporator pressure increased and refrigeration capacity decreased as the EEV opening step of hot-gas bypass increased. These results can be used as basic data for the design of effective water cooler.

• Fire Science and Engineering
• /
• v.27 no.2
• /
• pp.6-10
• /
• 2013

This study aims to construct the performance data for smoke-control zone and realize the safety of injection and pressurization room which is composed of supply air pressure zone, vestibule, smoke-control zone and stairwell. To obtain this, smoke-control system and the device of the opening-closing force of fire door are manufactured. This subject is the analysis of the closing force, angular velocity and fire door size in the case of fixed volume flow rate. Based on the results, closing force increased as fire door size and closing angular velocity increases. Also, it is remark that there exists a critical angular velocity, which maintains constant maximum closing force even though the angular velocity increases more.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.396-402
• /
• 2015

This study identified a new male-sterile germplasm of Chinese jujube, named male-sterile No. 2 (JMS2), and achieved controlled hybridization using that germplasm as the female parent. The anthers of JMS2 before flower bud opening became shrunken, dingy yellow and much smaller than normal ones, and they changed to brown after anthesis. No pollen was observed in anthers of JMS2 and its male-sterile trait remained stable over different years. A total of 1,642 fruits were obtained from ten intra- and interspecific cross combinations via controlled hybridization from 2008 to 2012 using JMS2 as the female parent. Of those, 27.3% produced seeds, on average (0-72.6%). The rate of fruit with seed (RFS) was significantly different between cross combinations or years. Compared to other cross combinations, the RFS in the combination of JMS2 ${\times}$ 'Xingguang' (a Chinese jujube cultivar with high resistance to jujube witches' broom disease) and JMS2 ${\times}$ 'Xing16' (a sour jujube genotype) remained high in different years and reached means of 48.7 and 58.1%, respectively. Finally, 150 plantlets were regenerated from immature embryos, and 51 of them were randomly selected and identified to be authentic hybrids using amplified fragment length polymorphism (AFLP) markers. This is the first report of hybrids obtained from a cross between Chinese jujube and sour jujube.

• Management & Information Systems Review
• /
• v.1
• /
• pp.333-362
• /
• 1997

Since the profess of the reformation and opening Policy in 1978, China has been outstandingly developed its economy and increased the real scale of its economy 4 times as big as before, and is expected to rise as a superpower holding in check U.S.A even in economy as well as politics, military affairs and diplomacy in the 21st century. In this position, China has constantly tried to join WTO since 1986, as an effort to gain a status in the international society. It hsa been making various economic reformations to provoke a crustal movement in its own economy such as tariffs lowering measurement for the almost whole items, remove of restriction of import items, lowering the refunding rate of over deposit tax and annihilation of the special treatments for the foreign investment. In short, recently Chinese government is cutting down the special treatments for the foreign capital enterprises and changing the policy to the direction of gradually reinforcing the control, so it requires that our enterprises trying to advance and invest in China have to consider these carefully. Investment in China of our enterprises become serious since 1990 is focused on such labor intensive industries as textiles, sewing and shoes which lost the competitive power due to the wage increase. Particularly, Pusan economy having played the role of locomotive for Korean economy in the past developing period has been weakened in the competitiveness and not yet activated in 1990s. In terms of this, the enterprises engaged in such typical industries of Pusan as shoes, textiles and sewing have borne much fruit from the investment in China with abundant and cheap labors. However, from a few years the enterprises in Pusan invested in China due to the cheap labors and rich resources and invested in China have suffered much troubles and failures more and more resulted from the advancement without sufficient previous knowledge and information related to the investment including investment environment. Therefore, at the time of advancement in China, Korean enterprises should make their decision related to the investment, after taking these investment environment into account previously to a full extent and making an investment strategy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.145-151
• /
• 2012

The pulsimeter is a representative device in the oriental medicine, which can analysis a risk factor in a cardiovascular diseases. However, most of the previous methods have the limit by the contacted sate of the brachial pulse and sensor in the measuring time, the inaccuracy of detected pulse, and the difficulty of pulse analysis. Accordingly, we propose the moving pulse image analysis based pulsimeter that can acquire a pulse of patient in real time by analyzing a moving image. then this video is shot the state change of the T.S. occurred by a pulse in capillary. In order to evaluate the performance of the our pulsimeter, we measured a respective detecting-rate about the essential 5 feature-points in the pulse analysis from the detected original pulse. As a result, the proposed method is very successful.

• Journal of Korean Society on Water Environment
• /
• v.35 no.6
• /
• pp.580-588
• /
• 2019

The flow of the middle and downstream of the Yeongsan River is stagnant by two weirs of Seungchon and Juksan and the estuary dam and maintained in freshwater. In this study, the Environmental Fluid Dynamics Code-National Institute of Environment Research(EFDC-NIER) model was applied to the Yeongsan River to simulate water flow, temperature, and salinity stratification. The EFDC-NIER model is an improved model which can simulate multi-functional weirs operation, multiple algal species, and the vertical movement mechanism of algal based on the EFDC model. The simulation results for the water level, water temperature, velocity, and salinity reproduced the observed values well. The mean absolute error(MAE) of the model calibration in the annual variations of the water level was 0.1-0.3 m, water temperature was 0.8-1.7 ℃, velocity was 4.5-7.1 cm/sec, and salinity was 1.5 psu, respectively. In the case of scenario simulation for the full opening of the estuary dam, the water level of the estuary dam was directly impacted by the tide so it was predicted to rise - 1.35 m to 0.2 m on average sea level. The velocity was also predicted to increase from 2.7 cm/sec to 50.8 cm/sec, and the flow rate to increase from 53 ㎥/sec to 5,322 ㎥/sec.

• Journal of Korean Clinical Health Science
• /
• v.3 no.1
• /
• pp.276-289
• /
• 2015

Purpose. To efficiently manage hospitals, this study aims to analyze the general characteristics, common-type balance sheet, common-type profit and loss statement and financial ratio of a tertiary general hospital and use the results as basic data for future hospital development by comprehending causes for problems and analyzing hospital management. Methods. By using information about a tertiary general hospital, located in A Metropolitan City, provided through Alio (www.alio.go.kr), a public organization information provider, Health Insurance Review & Assessment Service, and Ministry of Health and Welfare, this study used data during 3 years(2011 to 2013) by analyzing the general characteristics, common-type balance sheet, common-type profit and loss statement, industrial mean ratio and financial ratio of hospitals. Results. This study came to the following conclusions through the general characteristics, common-type balance sheet, common-type profit and loss statement, industrial mean ratio, financial ratio, circular chart and ROI by analyzing the data from 2011 to 2013. Conclusions. Overall, A Tertiary General Hospital showed an increase in fixed cost due to the construction of J Hospital and even in the size of capital and assets. It also showed an increase in medical profit, but the increase of its medical cost was higher, resulting in a financial loss. Especially, this hospital showed a slight decrease in net profit, featuring a reduction in inventory turnover. When the management of A Tertiary General Hospital was predicted based on such features, this hospital is expected to improve its profit structure through the opening of J Hospital, and it is necessary for this hospital to increase and sustain the turnover rate of inventories accumulated by managing them better.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.947-950
• /
• 2001

To improve the low content of crude protein and low quality fermentation of napiergrass silage, ensiling with phasey bean was examined. Napiergrasses, (Pennisetum purpureum cv. Merkeron), hybrid napiergrass (Pennisetum purpureum${\times}$ Pennisetum typhoides) and phasey bean (Macroptilium lathyroides cv. Murray) were cultivated in Fukuoka, Japan. The first growth of napiergrasses and phasey bean were harvested at 90 days of age and chopped into about 1 cm lengths. The mixing levels of phasey bean with napiergrasses were 0, 25, 50 and 75; 700 g of plant materials were ensiled into a laboratory silo (1.0 litre. polyethylene container) and incubated for 30 days. After opening silos, pH, total nitrogen (TN), volatile basic nitrogen (VBN) and organic acids (lactic acid: LA, acetic acid: AA, butyric acid: BA) were determined. The experiment was a factorial design of $2{\times}4$ with 3 replicates. The data were analyzed statistically by two-way analysis of variance. Without inclusion of phasey bean, lower quality was observed for hybrid silage than for Merkeron silage. The inclusion of phasey bean at the rate of 25% increased DM and TN, and decreased pH value, VBN/TN, AA and BA in both Merkeron and hybrid napiergrass silages. The value of pH, TN, VBN/TN, AA and BA were not significantly different among 25, 50 and 75% mixing levels of phasey bean. LA production increased significantly with the increase in phasey bean mixing level in both hybrid and Merkeron silages. At all mixing levels of phasey bean, LA production did not show significant differences between Merkeron and hybrid silages.

• Journal of Welding and Joining
• /
• v.13 no.2
• /
• pp.96-105
• /
• 1995

A modified method for the analysis of short fatigue crack growth has been presented, and calculations based upon the modified method are compared with experimental results for S45C carbon steel. It is also shown that the modified method is in good agreement with experimental data. The proposed equation for the fatigue crack growth rates includes a material constant which relates the threshold level to the endurance limit, a correction for elastic-plastic behaviour and a means for dealing with the effects of crack closure. In this study one of the modifications is to substitute the Forman' s elastic expression of the stress intensity factor range into the geometrical factor The other is a consideration of the bending effect which is developed from the moment caused by the eccentric cross sectional geometry as the crack grows. Thus, this method is useful for residual life prediction of the mechanical structures as well as the welding structures.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.3
• /
• pp.100-106
• /
• 2001

In this study, CT specimens were prepared from Pressure Vessel Steel which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -10$0^{\circ}C$ and -12$0^{\circ}C$ and in the range of stress ratio of 0.05 and 0.3 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ${\Delta}K_{th}$ in the early stage of fatigue crack growth (Region I) and stress intensity factor range ${\Delta}K$ in the stable of fatigue crack growth (Region II) was increased in proportion to descent temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN $-{\Delta}K$ in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It was assumed that the fatigue crack growth rate da/dN in proportion to descending temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.