• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.203-206
• /
• 2006

The drawbeads, which is used for controlling the flow of the sheet by imposing the tension and for preventing the springback in the sheet metal forming process, affects a lot the formability because of the differences in the restraint and opening forces according to the drawbead shapes and dimensions. In this study, the experimental device enabling to measure the drawbead restraining forces and the drawbead opening forces associated with various drawbead shapes and dimensions and their theoretical evaluation are introduced and verified through the experimental measurement of those of a circular drawbead.

• 대한안전경영과학회지
• /
• 제23권4호
• /
• pp.43-48
• /
• 2021

In this study, the experiment was conducted on a fire door(W × H = 0.98 m × 2.19 m) installed on the vestibule. The effective leakage area for each opening angles and closing forces derived from the impulse-momentum equation was compared and analyzed with the experimental results. As a result of the experiment, the major factors affecting the door closing forces were the pressure difference and the area of the door. The difference of door closing forces between measured and calculated values by the impulse-momentum equation showed a deviation of less than ±15% at the opening angles of 5°to 10°. At the door opening angle of 2.5°, the dynamic pressure was much higher than the measured static pressure, and this pressure difference is estimated to be air resistance acting to prevent the door from being completely closed.

• 한국산학기술학회논문지
• /
• 제15권9호
• /
• pp.5820-5825
• /
• 2014

본 연구에서는 급기 가압 제연구역 출입문의 개방력 기준을 실측하여 한국인의 체형에 적합한지 여부를 검증하였다. 개방력 기준의 검증은 기술표준원의 인체표준정보를 근거로 NFSC 501A, NFPA 92A 및 BS-EN 12101-6와 비교하였다. 개방력을 측정할 때 인체의 자세는 일어서서 오른손으로 출입문을 미는 것을 기준으로 하였다. 실측한 값을 분석한 결과 30대 남성 및 여성이 미는 힘의 최대값을 나타냈고, 60대에서 최소값을 나타냈다. 또한 모든 연령에서 미는 힘의 편차가 크게 발생한 것으로 확인되었다. NFSC 501A 와 비교한 결과 남성은 20대, 30대, 50대를 제외한 모든 성별과 연령에서 기준보다 낮은 값을 나타냈다. 또한 NFPA 92A 의 기준과 비교할 때 모든 성별과 연령에서 측정치의 평균이 기준보다 낮다. 그리고 BS-EN 12101-6 의 기준과 비교할 때 남성은 모든 연령에서 기준보다 높았으며, 여성은 모든 연령에서 기준보다 낮은 것으로 측정되었다. 따라서 신체적 조건이 외국인과 다른 한국인의 체형을 고려할 때 현재 적용되고 있는 제연구역 출입문의 개방력의 국내 기준 110 N은 하향 조정할 필요가 있는 것으로 판단된다. 또한 국제 기준을 임의로 사용하는 것도 문제가 있으므로 건축물과 사용자의 특성을 고려한 기준의 적용이 필요하다는 것을 제안하고자 한다.

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.769-779
• /
• 2007

Statement of problem. When TiN coating is applied to the abutment screw, occurrence of greater preload and prevention of the screw loosening could be expected due to decrease of frictional resistance. However, the proper thickness of TiN coating on abutment screw has not been yet reported. Purpose. The purpose of this study is to find out the appropriate TiN coating thickness by evaluating the detorque force and the surface change of titanium abutment screw with various TiN coating thickness. Material and methods. 1. Material Thirty five non-coated abutment screws were prepared for TiN coating. TiN coatings were prepared by Arc ion plating method. Depending on the coating deposition time(CDT), experimental groups were divided into 6 groups(CDT 30min, 60min, 90min, 120min, 150min, 180min) and those of 1 group was not coated as a control group. Each group was made up of 5 abutment screws. 2. Methods FE-SEM(Field Emission Scanning Electron Microscoper) and EDX(Energy Dispersive X-ray Spectroscopy) were used to observe the surface of the abutment screw. Electric scales was used to measure the weight of the abutment screw after the repeated closing and opening of 10 trials. Detorque force was measured with digital torque gauge, at each trial. Results. 1. As the coating deposition time increased, the surface became more consistent and smooth. 2. As for the abutment screws that were TiN coated for more than 60 minutes, no surface change was found after the repeated closing and opening. 3. The TiN coated abutment screws showed less weight change than the non-coated abutment screws. 4. The TiN coated abutment screws showed higher mean detorque force than the noncoated abutment screws. 5. The abutment screw coated for 60 minutes showed the highest mean detorque force. Conclusion. The coating layer of proper thickness is demanded to obtain consistent and smooth coating surface, resistance to wear, and increased detorque force of the abutment screw. In conclusion, the coating deposition time of 60 minutes indicated improved mechanical property, when TiN coating was conducted on titanium abutment screw.

• 한국수자원학회논문집
• /
• 제51권5호
• /
• pp.405-415
• /
• 2018

연직수문의 방류량 계산에 필요한 수리학적 변수는 유량계수, 수문개방고, 상류수심이다. 자동수문의 수문개방고는 나머지 변수에도 영향을 미치기 때문에, 운영 중 수문개방고의 거동을 예측하는 것은 정밀한 수문설계를 위해 매우 중요하다. 본 연구에서는 부력식 연직수문 모형을 대상으로 부력이론으로 계산한 수문개방고와 실험에서 방류 중에 측정한 값과의 관계로 부터, 임의의 상류수심에서 수문개방고를 예측할 수 있는 무차원 관계식을 도출하였다. 측정값이 계산 값과 차이가 나는 것은 동수압 하중에 의한 영향임을 압력계수를 이용하여 검증하였다. 유량계수는 수문개방율과의 무차원 관계식을 도출하였다. 도출된 관계식들을 홍수추적에 적용한 결과, 수문설계 시에는 동수압 하중으로 인한 수문개방 억제 효과를 충분히 고려하여야 하는 것으로 판단되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.699-701
• /
• 2003

This paper compare the Townsend theory with the Molten metal bridge theory of Holm for the arc discharge at opening contacts. And we measured the arc voltage at opening contacts of the 3 types arc extinction unit used in DC magnetic contactor. So, we sure that the molten metal bridge contributes to form the arc. By the experiment of the 3 types arc extinction unit, we know that the magnetic force acting on the arc doesn't effect forming arc but contribut the arc extinction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.137-140
• /
• 2003

To the optimization design of molded case circuit breakers(MCCBs), it is necessary and important to calculate the electro-dynamic repulsion force acting on the movable conductor. With 3-D finite element nonlinear analysis, according to the equations among current-magnetic field-repulsion force and taking into account the ferromagnet, contact bridge model is introduced to simulate the current constriction between contacts, so Lorentz and Holm force acting on the movable conductor and contact, respectively, can be integrated to calculate. Coupled with circuit equations, the opening time of movable contact also can be obtained using iteration with the restriction of contact force. Simulation and experiment for repulsion forte and opening time of five different configuration models have been investigated. The results indicate that the proposed method is effective and capable of evaluating new design of contact systems in MCCBs.

• Tribology and Lubricants
• /
• 제20권2호
• /
• pp.68-76
• /
• 2004

Applying a general Galerkin FE lubrication analysis method to spiral groove dry gas seals, this study intends to analyze in detail the effects of groove design parameters, such as a spiral angle, groove width ratio, groove radius ratio, groove depth ratio, and groove taper ratio, on the lubrication performances of an opening force, leakage, axial stiffness and damping, and angular stiffness and damping at low and high rotating speeds: 3,600 and 15,000 nm. Results show that, for the primary design consideration performances such as the opening force and axial and angular stiffnesses, a spiral angle of $25^{\circ}$, a groove width ratio of 0.46, a groove radius ratio of 1.1, a groove depth ratio of 1.0, and a groove taper ratio of 0.0 are preferred. Where the recommended relatively low values of groove depth and taper ratios are to keep the axial and angular dampings positive or higher than 0 particularly at the high rotating speed.

• 전산구조공학
• /
• 제8권4호
• /
• pp.149-158
• /
• 1995

열간압연된 형강은 수직재나 휨재 등으로 사용할 때 파이프나 덕트 등의 설비에 필요한 공간을 확보하기 위해 웨브에 개구부를 두기도 한다. 개구부를 갖는 형강의 웨브는 면내력을 받는 사각형 평판으로 고려하여 좌굴하중을 구하였다. 재하변은 단순지지로 하고 재하변은 직각인 변은 탄성지지단으로 보고 해석하였으며, 국부좌굴에 대한 보강을 위해 개구부 주위(하중 방향과 평행한 두변)에 보강재를 두어 단면 손실에 대한 좌굴하중의 감소를 보강하였다. 본 연구에서는 평판에 대한 고전적인 이론해와 유한요소에 의한 해석해를 비교하여, 해석에 대한 해의 정확성을 검증한 후 개구부의 크기, 보강재의 크기와 탄성지지단의 비틀림 상수의 변화에 대한 효과를 알아보았다. 그 결과 이론해와 해석해의 오차는 0.31%로 상당히 정밀한 해석해를 얻었으며, 비틀림 상수의 크기와 보강재의 크기에 따라 유공 보강판의 효과적인 개구부 크기를 결정하였다.

• 한국유체기계학회 논문집
• /
• 제17권1호
• /
• pp.5-11
• /
• 2014

The purpose of this paper is to investigate an analytical approach for opening performance evaluation of the nuclear pressure safety valve based on standard codes such as ASME or KEPIC. It is well-known that safety valve is considered as one of pressure relief valves for protecting a boiler or pressure vessel from exceeding the maximum allowable working pressure. When pressure in a container reaches its set pressure, the safety valve commences discharging the internal fluid by a sudden opening called as popping. Safety valve is usually evaluated by set pressure, full open, blow-down, leakage and flow capacity. The test procedure and technical requirement for performance evaluation is described in international code of ASME code such as BPVC. The opening characteristics of steam safety valve can be analyzed by computational fluid dynamics (CFD) and steam shaft dynamics. First, the flow analysis along opening process is simulated by running the CFD models of the ten types of opening steps from 0 to 100%. As a analysis result, the various CFD outputs of flow pattern, pressure, forces on the disc and mass flow at each simulation step is demonstrated. The lift force is calculated by using the forces applied on disc from static pressure and secondary flow. And, the effect of huddle chamber or control chamber is studied by dynamic analysis based on CFD simulation results such as lift force. As a result, dynamics analysis shows opening features according to the sizes of control chamber.