• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.688-692
• /
• 2000

This study proposed design parameters of opening spring of circuit breaker that cut off the over-current in order to protect the electric device about opening speed using the energy method. We simulated the opening kinetic energy, the potential energy of opening spring and the design parameters of opening spring with respect to opening speed of VCB (Vacuum Circuit Breaker)'s moving contactor which has 24kV 25kA break capacity. From the result of simulation the initial tensional force and the final tensional force of the opening spring chose 107kgf and 282kgf respectively. Through the dynamic analysis using ADAMS, We verified that the opening speed of moving contactor satisfied break capacity of VCB and analyzed opening dynamic characteristics of VCB such as the opening displacement, the opening velocity and the opening acceleration of moving contactor in time domain.

• Fibers and Polymers
• /
• 제6권3호
• /
• pp.250-258
• /
• 2005

The present paper is concerned with the influence of opening roller speed, drum speed difference and suction air pressure on properties of polyester and acrylic open-end friction spun yams. The results shows that the opening roller speed and the suction air pressure have considerable influence on the characteristics of polyester and acrylic open-end friction spun yams. In case of polyester yams the unevenness, imperfection and hairiness decreases and the yam tenacity increases with the increase in opening roller speed and suction air pressure. However for acrylic yams the unevenness and imperfections decreases and tenacity increases with the increase in opening roller speed and suction air pressure.

• International Journal of Aerospace System Engineering
• /
• 제4권2호
• /
• pp.5-9
• /
• 2017

In a pressurized fuel supply system of aircraft, a flow passage opening device is required to keep fuel continuously transferred from one tank to the other. The device utilizes balancing weights in order to follow up an acceleration at special conditions such as negative g. It is very difficult to test the device in a real high-speed and high-altitude test since severe test conditions and expensive supports are needed. Therefore, this paper deals with performance analysis of a flow passage opening device through low speed aircraft captive flight tests (CFT) including roll and negative-g maneuvers. It is shown that balancing weights in the device can open the passage in accordance with fuel position.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권9호
• /
• pp.408-413
• /
• 2005

This paper presents the basic design technology on the hybrid type GCB(gas circuit breakers) through the test results. The three type hybrid interrupters according to the arrangement of the thermal expansion chamber and the puffer cylinder(they are called 'serial type', ' parallel/exchanged type ,' and ' parallel/separated type ' respectively in this work) were designed and manufactured and then the tests of operating characteristics and interrupting were performed using a simplified synthetic test facility. The interruption capability with the type and the opening speed and the pressure rise which is required to interrupt were examined. The change of pressure rise with the number of interruption was given quantitatively and therefore the pressure rise can be predicted. Finally, it was shown that the interruption capability tends to increase with the increasing of opening speed in the puffer type; however, the hybrid type interrupter has a different interruption characteristic.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.163-170
• /
• 2002

The dynamic model of a high-speed vacuum circuit breaker mechanism with spring-actuated cam and linkage is derived to simulate the high-speed closing and opening operations. Its validation for an analysis of high-speed motion behavior is checked through experiments. The characteristics of the friction on the camshaft are investigated using the nonlinear pendulum experiment. The parameters of the friction model are estimated using the optimization technique. The analysis exhibits that the friction of the pendulum depends on stick-slip, Stribeck effect and viscous damping. Comparing simulation results with actual responses using a high-speed camera, the appropriateness of derived dynamic models for the rapid closing and opening operations is shown. The spring motion, which has much influence on the closing responses, is observed.

• Wind and Structures
• /
• 제11권5호
• /
• pp.361-376
• /
• 2008

This paper considers internal pressure fluctuations for a range of building volumes and dominant wall opening areas. The study recognizes that the air flow in and out of the dominant opening in the envelope generates Helmholtz resonance, which can amplify the internal pressure fluctuations compared to the external pressure, at the opening. Numerical methods were used to estimate fluctuating standard deviation and peak (i.e. design) internal pressures from full-scale measured external pressures. The ratios of standard deviation and peak internal pressures to the external pressures at a dominant windward wall opening of area, AW are presented in terms of the non-dimensional opening size to volume parameter, $S^*=(a_s/\bar{U}_h)^2(A_W^{3/2}/V_{Ie})$ where $a_s$ is the speed of sound, $\bar{U}_h$ is the mean wind speed at the top of the building and $V_{Ie}$ is the effective internal volume. The standard deviation of internal pressure exceeds the external pressures at the opening, for $S^*$ greater than about 0.75, showing increasing amplification with increasing $S^*$. The peak internal pressure can be expected to exceed the peak external pressure at the opening by 10% to 50%, for $S^*$ greater than about 5. A dominant leeward wall opening also produces similar fluctuating internal pressure characteristics.

• 기술사
• /
• 제43권6호
• /
• pp.27-30
• /
• 2010

Gyeongbu high-speed railway project which comprises the construction of the new line with 417.5km between Seoul and Busan is one of the biggest national projects with approx. 20-trillion-won project cost. The construction was started in June 1992 and afterward phase I (between Seoul and Daegu) was opened in April 2004 and phase II (between Daegu and Busan, 169.5km) is scheduled for opening in the end of October 2010. It is assured that the opening of the entire sections of Gyeongbu high-speed railway will significantly increase productivity and efficiency by improving the land utilization with the promotion of personal and material exchanges induced by the reduction of travel time between regions. Especially, Gyeongbu high-speed railway will be the opportunity to boost speed-up of Korea railway.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.283-291
• /
• 2021

The Korean stow net is a fishing method that utilizes the changing direction of the net entrance with the tidal current. This study attempted to obtain basic data from the recent offshore stow net fisheries to improve the gear by analyzing the dynamic behavior of the nets affected by current speed and direction using computer simulations. A numerical calculation was performed at a current speed of 0.5 knot between 2.5 knot at each 0.5 knot. The time taken for the gear opening was the longest from 0.5 knot at 1,500 seconds and the shortest from 2.5 knot at 450 seconds in the simulations. In all cases, the net width and tension at net deployment gradually decreased as the current speed decreased. However, the net height tended to increase inversely proportional to the current speed. During the net rotation, the net height was maintained at all cases. The net width and tension fluctuated, but the regularity was very low. In this study, the calculated simulation data showed that the opening efficiency decreased proportional to the current speed. The opening efficiency is related to the catching efficiency; therefore, it is necessary to improve the gear to enhance its opening efficiency.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.899-902
• /
• 2007

The KTX train which brings April 2004 high-speed railroad commerce operation time is operated currently Kyungbu line Seoul-Gwangmyeong-Daejeon-Dongdaegu-Pusan and Honam line Youngsan-Gwangmyeong-Seodaejeon-Kwangju/Mokpo. The high-speed railroad opening to traffic after KTX train interior noise follows in railway line quality change and it is changing together. From the research which it sees until opening to traffic after present time of the KTX vehicle it executed an interior noise quality change from Kyungbu line.

• 수산해양기술연구
• /
• 제22권4호
• /
• pp.41-48
• /
• 1986

To investigate the midwater trawl gear available for the Korean near sea trawlers, the authors carried out a field experiment on the attitude and the opening efficiency of the otter board with the Pusan 404 (160GT, 750ps), a training ship of National Fisheries University of Pusan. The experimental trawl gear was designed to be operable by the ship and the otter board was made of single iron plate with 12% camber ratio. The special-prepared potentiometric angle detector was used for determining the attitude, and the 50 KHz fish finder for the opening between the otter boards. The results obtained can be summarized as follows: 1. The angle of attack varied by moving the towing point on the towing plate of the otter board. It showed 33 to 36 degrees when the point was set at the outmost position, 25 to 31 degrees at the middle position and 19 to 30 degrees at the inmost position, with a decreasing tendency according to the increase of towing speed in each cases. 2. The heel of the otter board always occured inwards, increasing slightly according to the increase of towing speed. 3. The tilt of the otter board always occured outwards, increasing slightly according to the move of the towing point inwards, and decreasing slightly according to the increase of towing speed. 4. The opening between otter boards showed the largest value when the towing point was set at the outmost position.