• 생물환경조절학회지
• /
• 제6권4호
• /
• pp.242-249
• /
• 1997

현대화 온실이 농가에 보급 된지 5년째를 맞고 있지만 환경조절을 위한 자동화 설비의 이용현황은 외국으로부터 수입된 일부 유리온실을 제외하고는 당초 목적한 성능과 기술에 이르지 못하고 있어 그 이용율이 아주 저조하다. 이것은 농민의 자동화 장치 이용기술 부족 때문이기도 하지만 자동화 장치의 하드웨어 및 소프트웨어가 농민에 의한 수동스위치 조작보다 제어 성능이 따르지 못한 것이 주된 이유라고 생각된다. 이에 본 연구는 지금까지 외국기술에 의존하거나 이용율이 낮은 원예시설의 환경조절자동제어 시스템을 국내 기술에 의해 생산 보급할 수 있도록 성능이 우수하고 적응성이 높은 시스템 개발을 위하여 수행한 연구결과를 요약하면 다음과 같다. 1. 온실의 고온관리를 위한 온실내외의 온도차를 함수로하여 창개례순서, 1회 개폐폭, 제어주기 둥을 결정하는 알고리즘을 개발하여, 제어프로그램을 작성하였으며 시스템을 운전하여 본 결과 제어성능이 우수하였다. 2. 파이프비닐온실에는 시스템의 설치 및 A/S의 편리성 등을 감안하여 각 환경요인별로 개별제어 할 수 있도록 시스템화하는 것이 바람직하다고 판단되었다. 3. 시스템의 실용화를 위하여 제어항목 중 관수, 탄산가스 농도, 커덴개폐는 타이머를 이용한 시퀀스제어로 하였다. 4. DSP칩을 이용하여 고온제어를 위한 창개폐제어 시스템을 실용화할 수 있도록 개발하였다. 5. 온실의 자동제어시스템과 연결되어 있는 전화를 통하여 관리자가 부재 중 온실의 과고온, 정전, 고장 둥 비상발생시 관리자에게 무선호출을 할 수 있는 경보시스템을 개발하였다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제24권2호
• /
• pp.15-25
• /
• 2018

Purpose: The important things in space plan of a screening center are improving the spatial awareness by space systemization and minimizing the examination time for customers, and reducing the required time of screening work and maximizing the capacity for the screening center. Therefore, we tried to solve the problem of improving spatial awareness and reducing the examination time by using the pedestrian based discrete event simulation at the minimum cost. Methods: We have analyzed the drawbacks and the supplement points by comparing the floor plan at the time of opening and the current floor plan. Based on the analysis, we propose an improved plan which changes the location of the examination rooms and the number of services, and we also verify the improved plan based on simulation analyses. Results: 1) Through the analyses, we derived the drawbacks of the floor plan at the time of opening, and we realized that the current floor plan reflects the drawbacks. 2) The major reasons of the long examination time are the human traffic jam and the occurrence of queues due to unreasonable allocation of services. 3) Through the discrete event simulation analyses, it was possible to specify the place of the queues manually so as to use the given space fairly. 4) Using the discrete event simulation, it was possible to reduce the examination time and to improve the spatial awareness effectively at the minimum cost. Implications: Although the proposed simulation methodology in this paper is an analysis of the existing screening center, we expect that the proposed methodology will be used to develop a more efficient architectural design process by pre-applying the method to the course of designing a screening center and finding the suitability of the proposed method with the matched number of services.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권6호
• /
• pp.685-691
• /
• 1998

In the first of two experiments, chemical composition (Ash, CP and CF contents), nutritive value (in vitro organic matter disappearance "lVOMD" and energy content "ME") and nitrogen retention of chopped date fronds (CDF) as affected by chemical treatment (CT) and storage duration (SD) were investigated. The experimental design was a completely randomized block, arranged in a $3{\times}4$ factorial, with 3 (CT) and 4 (SD) as the main factors using 2 replications / treatment. Three chemical treatments, were used : Control (With zero or no chemical treatment); treatment with 4% urea solution (w /w) and treatment with 4% urea + Date syrup extract (DS). The 4 (SD) were: Control (immediately after opening - without any storage or zero time storage); one month storage period; two months storage period and three months storage period. Both (CT) and (SD) had significant effects (p < 0.05) on CP and ash contents of the CDF, however there were no significant effects (p > 0.05) due to (CT) and (SD) on CF and nutritive value. High retention value (> 80%) for nitrogen was reported for the treated CDF, immediately after opening the incubated material (zero SD). However, nitrogen retention decreased with increasing (SD) to 67% after one month (SD) but tended to stay at a fairly constant level of 67% until 3 months of storage. In experiment 2, the feeding value of treated CDF was evaluated in comparison to Rhodes grass hay, using growing goats and sheep. A $4{\times}2$ factorial design was used (Four roughage sources were used : Rhodes grass hay, untreated CDF, urea-treated CDF and CDF treated with urea + DS with sheep and goats as two animal species, using three animals / treatment). Untreated CDF had a similar feeding value to Rhodes grass hay. However treatment of CDF with urea alone or with urea + DS depressed animal performance of both goats and sheep, apparently due to depression of feed intake (appetite). Feeding untreated CDF decreased feeding cost by 29% and cost/kg gain by 23%. CDF showed a good potential as a cheap local roughage and emergency feed for ruminants in the Sultanate.

• 한국항공운항학회지
• /
• 제20권1호
• /
• pp.26-33
• /
• 2012

Competition between air transportation and railways has grown fiercer in major countries around the world with the rise of high-speed railways. In South Korea, air passenger travel has been rapidly decreasing since the initial launch of the Seoul-Pusan KTX line in 2004 and second opening that followed in 2010. Further expansion of the high-speed railway is expected. At present, research efforts to verify the validity of constructing an underwater express railway tunnel between Ho-nam and Jeju Island are taking place. Considering the possible high speed railway connection between Seoul and Jeju Island, this thesis has analyzed the choice behavior of existing passengers of the major and low-cost carriers. For this, Stated Preference (SP) research has been performed for three variables, including fare, travel time and the number of runs, to estimate the substitution rate of each of the three variables. Binomial Logit Model has been estimated with the obtained data. The estimation of the model has found that airline passengers of major and low-cost carriers are willing to pay approximately 7,200 KRW and 5,000 KRW, respectively, to reduce travel time by one hour. If the number of runs in one day increases, it has been estimated that the passengers are willing to pay additional fares of about 390 KRW and 30 KRW, respectively. On the other hand, the substitution rate between the number of runs and the travel time was found to be somewhat insignificant. If the construction of the Seoul-Jeju line progresses in the future, this study could be used as preliminary data for determining fares, travel time and the number of runs.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.91-92
• /
• 2023

With the development of technology, interest in the implementation of free-form buildings is increasing, and research on producing free-form panels is being conducted accordingly. Since free-form buildings are curved and consist of geometric shapes, there are many problems with the production technology of free-form panels that implement them. Due to the inability to reuse molds, the cost of disposal of construction waste and waste of manpower for assembly increase the construction period and construction cost. To improve these limitations, a 3D printed concrete nozzle for FCP production was developed. However, this technology is not quantitatively extruded according to the shape of the panel, and there is a problem that residues are generated. Therefore, an free-form panel extrusion experiment was conducted to analyze the limitations of existing nozzles and to analyze the requirements for the development of new concrete extrusion nozzles. Existing nozzles were unable to be quantitatively extruded, resulting in errors. Due to the weak pressure of the screw and the inability to adjust the internal pressure, detailed extrusion speed control was impossible, and residue generation in the opening and closing device seemed to be the cause. Therefore, a pump capable of quantitative concrete pressure transfer and a pressure control device for easy extrusion of concrete are required. In addition, it is judged that it is necessary to develop an opening and closing device and an extrusion device that do not generate residues. The results of this study are expected to provide information for FCP production and production and to be a basic study of technologies necessary for the production of free-form building panels.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.354-356
• /
• 2004

This paper is the transient analysis for choosing the optimal SCR ratings of AC3 utilization category testing equipment(AC3 TE) used for electrical durability test for magnetic switch according to IEC60947-4 Annex B by utilizing EMTP -ATPDraw. Magnetic contactor closes and opens the motor load with ON/OFF switch of electronic contactor. It is also used for protecting and controlling the load. Magnetic contactor detects the over-current flow in the load with a over-current relay and disconnects the load by opening its control power. The key cost of AC3 TE is the SCR ratings. The more decreases SCR ratings, the more decreased the cost is, but it is impossible to ensure the reliability. On the other hand, the more increases SCR ratings, the more increased the cost is. Thereupon, in this paper after the testing circuit is simulated by using EMTP-ATPDraw the SCR ratings will be applied in order to guarantee the testing reliability of PT&T(Power Testing and Technology institute in LG Industrial Systems Co.,Ltd.).

• 지역연구
• /
• 제11권1호
• /
• pp.61-78
• /
• 1995

This study begins with a question of what spatial impact international trade policy would have following the Uruguay Round, particularly focusing on agricultural trade liberalization in Korea. Based upon the neoclassical urban economic model, it first identifies the channel in which agricultural market opening can ultimately affect both rural and urban are as; $\circled1$ Free trade will depress domestic price of agricultural products, $\circled2$ which will in turn depreciate agricultural land price. $\circled3$ The decrease in marginal supply cost for urban land will then facilitate urban sprawl, provided that the government relaxes restrictions on urban-rural land conversion. Theoretical analysis is further refined by empirical considerations that distinguish agricultural land value solely for production purpose from that for future urban, uses, and that distinguish the urbanization effect caused by the fall in the supply cost of urban land from that caused by the existing high level of demand. Utilizing the estimate of bid-price for paddy field derived from the revenue-cost relationship of rice production, simulation results show that the urban-rural boundary under trade liberalization can expand outward up to 70-85km radius in the Seoul metropolitan area, suggesting the emergency of a metropolis or even a megalopolis which extends from Seoul to the central part of the country. Since the geographic extent of urbanization effect can vary depending upon the urban spatial structure, however, it is recommended that the redevelopment option in the built - up area should always be tied up with the issue of whether to deregulate rural-to-urban land conversion.

• Steel and Composite Structures
• /
• 제18권2호
• /
• pp.305-324
• /
• 2015

In this study, two common types of laterally supported castellated beams are considered as design problems: beams with hexagonal openings and beams with circular openings. The main goal of manufacturing these beams is to increase the moment of inertia and section modulus, which results in greater strength and rigidity. These types of open-web beams have found widespread use, primarily in buildings, because of great savings in materials and construction costs. Hence, the minimum cost is taken as the design objective function and the Colliding Bodies Optimization (CBO) method is utilized for obtaining the solution of the design problem. The design methods used in this study are consistent with BS5950 Part 1 and Part 3, and Euro Code 3. A number of design examples are considered to optimize by CBO algorithm. Comparison of the optimal solution of the CBO algorithm with those of the Enhanced Charged System Search (ECSS) method demonstrate the capability of CBO in solving the present type of design problem. It is also observed that optimization results obtained by the CBO algorithm for three design examples have less cost in comparison to the results of the ECSS algorithm. From the results obtained in this paper, it can be concluded that the use of beam with hexagonal opening requires smaller amount of steel material and it is superior to the cellular beam from the cost point of view.

• 한국분무공학회지
• /
• 제20권2호
• /
• pp.114-120
• /
• 2015

Effects of injection conditions on a pintle injector which is proper to recent liquid rocket engines requiring low cost, low weight, high efficiency and reusability were studied. The pintle injector with a typical moving pintle was used for atmospheric experiment using water and air. Injection pressures of water were considered 0.5 and 1.0 bar, 0.1 to 1.0 bar for injection pressures of air and 0.2 to 1.0 mm for pintle opening distance. Sauter mean diameters (SMD) of spray was measured at 50 mm distance from a pintle tip and SMD was treated as a representative parameter in this study. As a result, because of shape characteristics of the pintle injector, there was a transient region between the pintle opening distances of 0.6 and 0.7 mm and this region affected to mass flow rates and SMDs. Also, Reynolds numbers for gas, Weber numbers and momentum ratios were adopted as major non-dimensional paramters and the momentum ratio has strong correlation with SMD.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.718-725
• /
• 2017

The method of stator segmentation is generally taken to enhance the electromagnetic performance of surface-mounted permanent magnet (SPM) machine and reduce its production cost. Based on the model with single slot, the expressions of cogging torque in machine with uniform or non-uniform segmentations are deduced and the optimal combination is given. Moreover, this paper discusses a structured skewing method and put forward a novel stator structure model to reduce the cogging torque in segmented permanent magnet machine. The model can reduce the cogging torque amplitude by shifting a proper angle of slot-opening. The shifting angle formula for analysis can also be suitable for other permanent machine with segmented stator. Finally the results of finite element simulation are given to prove that the method is effective and feasible.