• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.01a
• /
• pp.3-6
• /
• 2013

반도체 공정에서 소자의 제조 비용 감소를 위해 제조 공정 검증을 위한 시뮬레이션을 수행하게 된다. 이 시뮬레이션은 반도체 소자 내부의 물리량 계산을 통해 반도체 소자 내부의 불순물의 거동을 해석하게 된다. 이를 위해 사용되는 알고리즘으로 3차원적 형상을 표현하는 물리적 미분 미분방정식을 계산하게 되는데, 정확한 계산을 위해 유한 차분 시간 영역법(이하 FDTD)과 같은 수치해석 기법을 이용한다. 실제적으로 반도체 공정의 시뮬레이션에서 FDTD연산의 실행 시간은 90% 이상을 소요하게 된다. 이러한 연산에서 더욱 빠른 성능을 확보하기 위해 본 논문에서는 기존의 CUDA(Compute Unified Device Architecture)로 구현된 FDTD알고리즘을 OpenMP를 통한 다중 GPU제어를 이용하여 연산 수행시간을 감소하고, 그 결과물을 통하여 성능 향상도를 측정한다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.7-12
• /
• 1998

The wave reflections from several types of open-ended coaxial probes contacted on the various materials have been analyzed precisely by using the finite-difference time-domain(FDTD) technique in this paper. Due to the coordinate transformation from three-dimension to two-dimension, the computation was performed very efficiently. It was found that the reflection from an open-ended coaxial probe reduces as frequency or diameter of a coaxial line increases. The reflections from multi-layered media were also analyzed by the FDTD method. This analysis technique was verified by comparison with measurements and theoretical computations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.486-487
• /
• 1997

This paper presents the pure capacitive lumped element equivalent circuits for several coplanar waveguide(CPW) discontinuities such as an open-end, an open-end with connected ground planes, a gap and an open-end CPW stub and gives their capacitive element values as a function of physical dimensions of the discontinuity and the frequency for a specific substrate. The capacitive element values are determined from the scattering parameters which are obtained using the finite-difference time-domain(FDTD) method. For an open-end, an open-end with connected ground planes and a gap, the numerical results of the FDTD are compared with the quasi-static results which are calculated using the three- dimensional finite difference method(3D-FDM).

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.8
• /
• pp.19-26
• /
• 1999

umerical simulations are performed to estimate how strongly the manufacturing error of an open-ended coaxial probe affects its measured complex permittivity of a contacted medium. The reflection coefficients of several dielectric materials contacted with an open-ended coaxial probe are calculated by employing the FDTD method. And then those complex permittivities are reconstructed by applying the calculated reflection coefficients into a new imaginary transmission-line model, which reveals more physically meaningful than the conventional model. It is found that the reconstructed complex permittivities suffer from significant error in spite of a slight imperfection of open-ended coaxial probe.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.493-498
• /
• 2004

The complex permittivities of methanol measured from 0.2 to 2.0 ㎓ using an open-ended coaxial probe revealed the large deviation from the given data in literature. In this paper, it was investigated whether the given or measured complex permittivity is similar to the real value of our methanol used for experiment. The FDTD method was applied to confirm the effect of our conversion model excluding the effect of sufficiently small measurement error. The complex permittivities reconverted from the computed reflection coefficient by employing our improved conversion model were not similar to the given value but measured value. These results assured the accuracy and stability of our measurement-and-conversion process.

• Proceedings of the Korea Contents Association Conference
• /
• 2015.05a
• /
• pp.59-60
• /
• 2015

반도체 공정에서는 소자 내부의 물리량 계산을 통해 결점를 검출하는 시뮬레이션을 수행하게 된다. 이를 위해 3차원적 형상을 표현하여 물리적 미분 방정식을 계산하는 유한 차분 시간 영역 알고리즘(Finite-Difference Time-Domain, 이하 FDTD)과 같은 수치해석 기법이 사용된다. 반도체 테스트 범위의 확장으로 인해 시뮬레이션 사이즈 또한 커지고 있는 추세이다. 이에 따라 하나의 프로세서에서 수행할 수 없는 문제가 발생하기도 한다. 이를 해결하기 위해 본 논문에서는 openMP와 MPI를 이용한 하이브리드 컴퓨팅 기법을 바탕으로 다중 GPU 제어를 통해 시뮬레이션 환경을 구축하였으며 정상 동작함을 확인하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.87-88
• /
• 2016

In this paper, a digital terrestrial TV reception antenna which can be applied to the house and vehicle windows was designed and investigated. The proposed antenna was configured for a monopole antenna structure with $230mm{\times}430mm{\times}3mm$, and the antenna parameters are calculated by using the OpenFDTD simulator. The proposed antenna can be used to the receiver for domestic digital broadcast in UHF.

• Journal of the Korean Institute of Navigation
• /
• v.22 no.1
• /
• pp.15-22
• /
• 1998

In this paper, discontinuity parts in microstrip line with $\lambda$/4 open stub and one in crank type have been anlayzed by using FDTD(Finite-Difference Time-Domain) analysis method. The noise components, in this case, are occred at the discontinuites of the given microstrip lines, the complex poles were extracted by the analysis using GPOF (Generalized Pencil-of Function) method from electric field of time domain. It has, then, been found that the noise level and the noise frequency components included in signal could be derived.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.174-174
• /
• 2001

Purpose： Dimensions of body RF coil composed of 4 rectangular loops for low field open MRI hav been optimized. The design result shows the field inhomogeneity of B1 field below 1.5 dB in the 25 cm DSV can be achieved. Method： Our low field RF coil is composed of 4 rectangular strip loops that assumed to b located at both the bottom and top sides of permanent magnet. All the loops have identica dimensions and current amplitude. First, the inductance of a loop is calculated. Second, the current distribution on the coil strip is calculated by using finite difference time doma method (FDTD). It takes as much as 4 days in FDTD simulation for low frequency RF field That's why the electrical dipole radiation method is used for simulation. With the curren distribution obtained using the FDTD simulation, for various dimensional parameters th magnetic field has been calculated by electric dipole radiation method, where the curren elements are regarded as electric dipole radiation sources. The field pattern from electri dipole radiation is almost same as that from FDTD simulation. Also, it is same as that fro the result using the Viot-Savart equation, for far tone radiation term becomes zero and th Bl field amplitude of near one radiation is the same as the B field due to static current The field homogeneity is calculated in the 25 cm BSV.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.77-78
• /
• 2016

In this paper, small WLAN antenna was designed and investigated. Proposed antenna was configured for meandered type patch antenna ($20mm{\times}20mm$) that was mounted on RF4 dielectric substrate (relative permittivity 4.4, thick 1.6mm, tangent loss 0.025) size of $20mm{\times}60mm$. Antenna parameters was calculated by using the OpenFDTD simulator. As a result, frequency bandwidth satisfying the condition of VSWR(2:1) was 1.82-3.05GHz (1.23GHz, 44.6%) for considering WLAN.