• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.291-301
• /
• 2021

OPC UA at the control and field level does not provide enough performance to replace the field bus. The OPC Foundation aims for a real-time and connection-less mechanism, and has added the OPC UA publish-subscribe model, a new specification that supports broker functions such as MQTT and AMQP, as the OPC UA Part 14 standard. This paper is about a gateway for interoperability between OPC UA publisher with the addition of OPC UA Part14 standard and DDS subscribers. Raspberry Pi 4 is used for the gateway proposed in this paper, and OpenDDS, an open source, is used for DDS. OPC UA publish-subscribe module used A-Open62541 publish-subscribe module, which additionally implements functions not provided by the corresponding source based on Open62541 publish-subscribe open source.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.63-70
• /
• 2011

This paper presents the design and operating characteristics of the novel cylindrical linear motor which is designed for the long stroke XY stage. In the long stroke structure, the air gap is changed by the distortion and bending effects, and it makes additional position error in the XY stage. In order to consider the distortion and bending effects of the long stroke, the field part of the cylindrical linear motor is designed as an open structure, and the stroke is supported by the bridge guide which is positioned in the open field part. The mechanical bridge guide can reduce the bending effects of the stroke and can keep a constant air gap. The detailed design process of the proposed cylindrical linear motor is presented in this paper. The proposed motor is analyzed by the 3D FEM technology. The practical XY stage which uses the proposed motor is tested to verify the propose novel cylindrical linear motor. The FEM and experimental results show the effectiveness of the proposed motor.

• Journal of The Korean Astronomical Society
• /
• v.29 no.2
• /
• pp.269-278
• /
• 1996

We present the color-magnitude diagrams (CMD) of more than 24,000 stars in the field of an intermediate age open cluster M11, based on wide field CCD imaging. The morphology of the CMDs varies strikingly as the distance from the center of the cluster increases. From the surface number density analysis, we confirm the mass segregation effect in this cluster: the bright, massive stars are centrally more concetrated than the faint, low mass stars. The slope of the field-corrected surface density with respect to magnitude progressively increases as the radius increases, up to r = 5'. Most of the field stars in or near the cluster main sequence band and in the bright part of the red stars in the CMDs appear to be nearly at the same distance as M11, and they are considered to be the major component of disk stars in the Sagittarius-Carina arm.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.101-103
• /
• 2003

This paper deals with field distributions in high speed motor with two different types of diametrically magnetized PM rotor, one is that rotor is consisted of PM and shaft, the other is that rotor has only PM. In case of high speed motor with rotor consisted of PM and shaft, this paper predicts field distributions in high speed motor according to the quality of shaft. The magnetic field solutions are derived analytically in terms of vector potential and 2-D polar coordinate system. The results are shown in good conformity with those obtained from the commonly used finite element method.

• Progress in Medical Physics
• /
• v.4 no.1
• /
• pp.55-71
• /
• 1993

Measured and calculated the TMR and SMR factors from percent depth dose underpartial attenuators which cover the whole part of the radiation beam with variousfilter thickness from 0 to 50 mm. This study was performed for x-ray beams generated with a 6 MV linear acceleratorat source to surface distance of 100cm in a water phantom for Lipowitz metal. TMR(0,d,t) was derived from non-linear polynomial regression with field sizedifferencies and a given filter thickness. In this experiments, the TMR(0,10,50) of 50mm of filter thickness was showed13.6 % higher than that of open field and SMR(5,10,50) was 38.5% smaller than thatof open field in same depth.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.274-274
• /
• 2017

Temperature has an adverse effect for potential growth and development of Codonopsis lanceolata. The present study examined the responses of growth, yield and mineral element contents under temperature variables in C. lanceolata. Plant height exhibited the best result as being 2 m or higher the open field culture, while the growth is the most restricted in the $30^{\circ}C$. The open field culture also had the largest number of leaves in the early stage of growth. The number of leaves and the height tended to be increased with the temperature of $20^{\circ}C$ and $25^{\circ}C$. The number of branches showed no significance as 32 branches and 26 branches in open field culture and $20^{\circ}C$, respectively. The smallest number of branches was observed in the $30^{\circ}C$ with 15 branches. The leaf color recorded the lowest value in the open field culture unlike the growth above the ground. But all other temperature had no significance with the leaf color value between 50.0 and 52.6. The elevated temperature induced the thinner and shorter diameter and length of root. However, the root diameter was not significantly changed with the change of 1.8 cm and 2.1 cm at open field culture, with $20^{\circ}C$ and $25^{\circ}C$, respectively. The fresh weights of the primary root and lateral roots were 6.3 g and 3.1 g, respectively, at the high temperature. The result showed the thickening of the lowest part under the ground as restricted. The fresh weights of the main root and lateral root were the highest on the open field culture, 20.6 g and 12.2 g, respectively. The contents of cellulose were the highest as 4.41% in the $20^{\circ}C$, followed by the open field culture, $25^{\circ}C$ and $30^{\circ}C$. The higher temperature reduced the contents of cellulose. Moreover, P showed higher ratio in the high temperature while Ca and Mg exhibited the higher ratio towards the low temperature. On the contrary, minor quantity (less than 1%) of mineral nutrients was observed towards all temperature variables.

• Journal of Biosystems Engineering
• /
• v.43 no.1
• /
• pp.72-80
• /
• 2018

Purpose: A modern greenhouse consists of various Information and Communications Technology (ICT) components e.g., sensor nodes, actuator nodes, gateways, controllers, and operating softwarethat communicate with each other. The interoperability between these components is an essential characteristic for any greenhouse control system. A greenhouse control system could not work unless the components communicate via common interfaces. The TTAK.KO-06.0288 is an interface standard consisting of four parts. Notably, TTAK.KO-06.0288-Part3, which describes the interface between a greenhouse operating system (GOS) and a greenhouse control gateway (GCG), is the core standard of TTAK.KO-06.0288. The objectives of this study were to analyze the TTAK.KO-06.0288-Part3 standard, to suggest alternative solutions for identified issues, and to develop a library as a proof of the alternative solutions. Methods: The "data field" was analyzed using a comparative analysis method, since it is a data transmission unit of TTAK.KO-06.0288-Part3. It was compared with other parts of TTAK.KO-06.0288 in terms of definition, format, size, and possible values. Although TTAK.KO-06.0288-Part1 and TTAK.KO-06.0288-Part2 do not use a "data field," they have a similar data structure. That structure was compared with the "data field" of TTAK.KO-06.0288-Part3. Results: Twenty-one issues were identified across four categories: inter-standard issues, intra-standard issues, operational issues, and misprint issues. Since some of the issues can raise interoperability problems, 16 alternative solutions were suggested. In order to prove the alternative solutions, an open-source communication library called libtp3 was developed. The library passed 14 unit tests and was adapted to two research. Conclusions: Although TTAK.KO-06.0288-Part3 is an interface standard for communication between a GOS and a GCG, it might not communicate between different implementations because of the identified issues in the standard. These issues could be solved by the alternative solutions, which could be used to revise TTAK.KO-06.0288. In addition, a relevant organization should develop a program for compatibility testing and should pursue test products for smart greenhouses.

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.143-150
• /
• 1997

In order to produce young leaf of butterbur(Petasites japoflicus MAX.) in early spring, the planting date and relationship between abscisic acid(ABA) content and dormancy were investigated. Under open field condition, the dormancy of rootstock was initiated in the beginning of October, was the deepest in the middle of November and was completely broken in the end of December. When those periods were converted by the low accumulation hour below 5$^{\circ}C$, 900 hours were required approximately. This means that the rootstock needs for dormant breaking necessitates under the low temperature. In relationship between growing period and ABA content, the ABA in root-stock did not exist during maximum growing period, from April to September. This means that the ABA together with other substances in rootstock can be transferred to the shoot part with sprouting. While shoot part withered by decreacing the open field temperature since October, the ABA intiated to exist in rootstock. This means that the ABA in the shoot part can be transferred to the rootstock part. Therefore, it was concluded that the ABA which has been known that inhibiting growth and inducing dormancy was closely related with dormancy of rootstock.

• Progress in Superconductivity and Cryogenics
• /
• v.3 no.2
• /
• pp.32-38
• /
• 2001

A 30[kVA] superconducting generator (SCG) is built and tested at Korea Electrotechnology Research Institute (KERI) in Korea. This superconducting generator has an air-gap winding instead of the typical steel teeth structure. The rotor has 4 field coils of race-track type with NbTi superconducting wired. The rotor is composed of two dampers and a liquid helium composed of two dampers and a liquid helium container in which the field poles reside. The space between the outermost damper and the container is vacuum insulated. A ferrofluid seal is used between the stationary part connected to the couping and the rotor. A helium transfer coupling(HTC) has 3 passages of the recovered heilum gas and a gas flow control system. The open circuit test and sustained short circuit test are preformed to obtain the open circuit characteristics (OCC) and short circuit characteristics (SCC) Also. the test results usder the light load (up to 3.6[kW]) are given. The structure, manufacturing and basis test of the 30[kVA]SCG are discussed.

• Earthquakes and Structures
• /
• v.15 no.5
• /
• pp.487-498
• /
• 2018

Buckling-restrained braces are passive control devices with high level of energy dissipation ability. However, they suffer from low post-yield stiffness which makes them vulnerable to severe ground motions, especially near-field earthquakes. Among the several methods proposed to improve resistance of BRB frames, mega-brace configuration can be a solution to increase frame lateral strength and stiffness and improve distribution of forces to prevent large displacement in braces. Due to the limited number of research regarding the performance of such systems, the current paper aims to assess seismic performance of BRB frames with mega-bracing arrangement under near-field earthquakes via a detailed probabilistic framework. For this purpose, a group of multi-story mega-BRB frames were modelled by OpenSEES software platform. In the first part of the paper, simplified procedures including nonlinear pushover and Incremental Dynamic Analysis were conducted for performance evaluation. Two groups of near-fault seismic ground motions (Non-pulse and Pulse-like records) were considered for analyses to take into account the effects of record-to-record uncertainties, as well as forward directivity on the results. In the second part, seismic reliability analyses are conducted in the context of performance based earthquake engineering. Two widely-known EDP-based and IM-based probabilistic frameworks are employed to estimate collapse potential of the structures. Results show that all the structures can successfully tolerate near-field earthquakes with a high level of confidence level. Therefore, mega-bracing configuration can be an effective alternative to conventional BRB bracing to withstand near-field earthquakes.