• Journal of Astronomy and Space Sciences
• /
• v.11 no.2
• /
• pp.208-231
• /
• 1994

We have undertaken CCD observations of fie이 standard stars with H$\beta$ photometric system to investigate the reliability of H$\beta$ CCD photometry. Flat fielding with dome flat and sky flat for H$\beta$w and H$\beta$n filter was compared with that of B filter in UBV system and, from these, we have not found any difference. It was confirmed that there is a good linear relationship between our H$\beta$ values observed with 2.3m reflector and standard values. However, H$\beta$ values observed with 60cm reflector at Sobaeksan Astronomy Observatory showed very poor relationship. To investigate the accuracy of H$\beta$ CCD photometry for fainter objects, open cluster NGC2437 was observed and reduced with DoPHOT, and the results were compared with those for photoelectric photometry of Stetson(1981).

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.1
• /
• pp.79-87
• /
• 2000

This paper presents an integrated but open product development environment for distributed and collaborative design. The web-based framework, called DOME, allows designers to build integrated models using both local and distributed resources, and to collaborate by exchanging services in a network-centric product development environment. Thus, an integrated model can be created while each participant focuses on his or her own area of expertise. A design problem model is created by connecting modules, which represent specific system components, analysis capabilities/software, disciplines, or organizations relevant to the problem. The modules interact with each other using service exchanges based upon the CORBA standard communication protocol. The goal of this framework is tall provide the ability to rapidly construct integrated design problem models to facilitate collaborative design work, improve product quality and reduce development time. Ultimately, it should allow specialized engineering applications and design problem models to operate under a common design environment.

• Publications of The Korean Astronomical Society
• /
• v.9 no.1
• /
• pp.101-110
• /
• 1994

We have investigated intensively an optical telescope with 76cm diameter and CCD camera system in astronomical observatory of Kyung Hee university, in order to maximize instrumental functions of our observational equipments and to construct a more reliable photometric system. And computer softwares AUTO DOME, KH CCD and KH PHO for astronomical image observations and their automatic photometries with high accuracy have been made for observers w use our observational system conveniently and efficiently. Throughout careful examinations of these programs, it has been proved that the observing time by our program is shorter than that by manual operations, so that, fast and accurate observations can be executed with ease. For open cluster NGC 7063 observed with S/N value of 350 or more by KH PHO, we have found the magnitude measurements of 11 object stars would show 0.007 magnitude difference, comparing with magnitude data from IRAF/APPHOT. From automatic photometry of eclipsing binary, AB And observed by our software, total 220 data points with good quality have been acquired during 8 hours and so we could make a better light curve than that obtained from any observational results by domestic photoelectric photometry system.

• Earthquakes and Structures
• /
• v.15 no.2
• /
• pp.123-132
• /
• 2018

In this paper the strain energy density (SED) model is used to analyze the seismic behavior of suspen-domes and a new criterion is established for judging the seismic failure based on a characteristic point in the SED model. Firstly, a nonlinear time-history response analysis was carried out using the finite-element package ANSYS for typical suspen-domes subjected to different ground motions. The seismic responses including nodal displacements, ratios of yielding members, strain energy density and structural maximum deformation energy were extracted corresponding to the increasing peak ground acceleration (A). Secondly, the SED sum ($I_d$) was calculated which revealed that the $I_d-A$ curve exhibited a relatively large change (called a characteristic point) at a certain value of A with a very small load increment after the structures entered the elastic-plastic state. Thirdly, a SED criterion is proposed to judge the seismic failure load based on the characteristic point. Subsequently, the case study verifies the characteristic point and the proposed SED criterion. Finally, this paper describes the unity and application of the SED criterion. The SED method may open a new way for structural appraisal and the SED criterion might give a unified criterion for predicting the failure loads of various structures subjected to dynamic loads.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.209-216
• /
• 1996

The primary objective of this paper is to grasp many characteristics of buckling behavior of latticed spherical domes under various conditions. The Arc-Length Method proposed by E.Riks is used for the computation and evaluation of geometrically nonlinear fundamental equilibrium paths and bifurcation points. And the direction of the path after the bifurcation point is decided by means of Hosono's concept. Three different nonlinear stiffness matrices of the Slope-Deflection Method are derived for the system with rigid nodes and results of the numerical analysis are examined in regard to geometrical parameters such as slenderness ratio, half-open angle, boundary conditions, and various loading types. But in case of analytical model 2 (rigid node), the post-buckling path could not be surveyed because of Newton-Raphson iteration process being diversed on the critical point since many eigenvalues become zero simultaneously.

• Journal of Korean Foot and Ankle Society
• /
• v.19 no.4
• /
• pp.161-164
• /
• 2015

Purpose: The purpose of this study is to define the geographic patterns of partial avascular necrosis (AVN) of the talar body and to determine whether there were any predictors of both the location and occurrence of partial AVN. Materials and Methods: Nineteen patients with fracture of the talar neck treated by open reduction and internal fixation and followed up for more than 1 year were analyzed. The radiographs were examined 6 to 8 weeks after the operation for Hawkins sign and if it was not observed, magnetic resonance scans were performed. The three-dimensional analysis was performed using Mimics 17.0 (Materialise). The incidence of collapse and time to operative intervention was recorded. Results: Partial AVN of the talar body was observed in six out of 19 patients. The avascular segment of the talar body was located predominantly in the anterolateral portion. The average volume of the avascular segment was $289mm^3$, and it occupied 1% of total volume of the talus, and 10% of the talar dome. Collapse occurred in one patient in the area of the avascular process. There were no observable trends with regard to Hawkins classification, incidence of collapse, or time to operative intervention to the location of the avascular segment. Conclusion: Partial AVN can occur after fracture of the talar neck. The predominant location of the avascular segment was the anterolateral portion of the talar body. This information may be helpful to understanding the process of avascular necrosis of the talar body.

• Archives of Plastic Surgery
• /
• v.38 no.1
• /
• pp.105-108
• /
• 2011

Purpose: An extensive knowledge of the arterial anatomy of the upper extremity and its variations is indispensable to the hand surgeon. We report a patient with anomalous radial artery, superficial course of two radial arteries, encountered during the excision of volar wrist ganglion. Methods: The patient was a 53-year-old man who had a painful mass on the left volar wrist for 1 year. Under general anesthesia, a curved incision was made around the mass. With the skin flaps retracted, the dome of the cyst was identified. Particular care was taken to identify and protect the radial artery, which was intimately attached to the wall of the ganglion. Two radial arteries completely encircled the ganglion. The pedicle was traced to the volar joint capsule, radiocarpal ligament. The joint was open and the capsular attachments were excised. Results: The patient made an uneventful recovery. There were two arterial pulsations at the volar side of the wrist joint. Compressing this site revealed that the major arterial contributor to blood supply in the hand was the ulnar artery. At angioCT, an anomaly of the radial artery was found with a duplication. The pathway of this aberrant artery was superficial to the original radial artery. It changed its course subcutaneously at the level of the tendon of the brachioradialis muscle, and crossing the wrist lateral to the original radial artery and ending in the deep palmar arch. Conclusion: Authors experienced a case of bifurcating radial artery encountered during the excision of ganglion on the volar of the wrist. Because these duplicated radial arteries make strong contributions to the thumb and index finger as well as to the deep palmar arch, when they are present there may be probably less blood supply to the hand from the ulnar artery. If the radial artery is palpated superficially on the brachioradialis muscle, it is important to remember the kind of anomaly.

• Korean Journal of Veterinary Research
• /
• v.47 no.1
• /
• pp.127-129
• /
• 2007

A 3-month-old male Maltese dog was presented with generalized trembling, ataxia, and seizure.The patient had traumatic injury on history takings. Physical examination revealed dome shaped craniumwith open fontanelle, nasal hemorrhage, and blepharoedema with hemorhage on the left side. On serumbiochemical profiles, creatine phosphokinase was severely elevated. There was no remarkable findingon radiography. Ultrasound images of brain were obtained via a persistence bregmatic fontanelle, andbilateraly dilated lateral ventricles with a hyperechoic mass on the left temporal lobe were detected.Based on clinical signs, history, physical examination, laboratory findings, and ultrasonographic findings,we suspected this intracranial mass to intracerebral hematoma induced by head trauma. Methylprednisoloneh after initial diagnosis. We performed necropsy and confirmed intracerebral hematoma. This case reportdescribes the identification of intracerebral hematoma using ultrasonography.

• Advances in aircraft and spacecraft science
• /
• v.3 no.1
• /
• pp.61-75
• /
• 2016

Climate changes brought on by human interventions have proved to be more devastating than predicted during the recent decades. Recognition of seriousness of the situation has led regulatory organisations to impose strict targets on allowable carbon dioxide emissions from automotive vehicles. As a possible solution, it has been proposed that Fibre Metal Laminate (FML) system is used to reduce the weight of future vehicles. To facilitate this investigation, FML based on steel and self-reinforced polypropylene was stamp formed into dome shapes under different blank holder forces (BHFs) at room temperature and its forming behaviour analysed. An open-die configuration was used in a hydraulic press so that a 3D photogrammetric measurement system (ARAMIS) could capture real-time surface strains. This paper presents findings on strain evolutions at different points along and at $45^{\circ}$ to fibre directions of circular FML blank, through various stages of forming. It was found initiation and rate of deformation varied with distance from the pole, that the mode of deformations range from biaxial stretching at the pole to drawing towards flange region, at decreasing magnitudes away from the pole in general. More uniform strain distribution was observed for the FML compared to that of plain steel and the most significant effects of BHF were its influence on forming depth and level of strain reached before failure.

• Journal of Animal Environmental Science
• /
• v.17 no.3
• /
• pp.155-162
• /
• 2011

This study was conducted to suggest the measurement procedure and to build up national greenhouse gas inventory database of animal agricultural sector by assessing methane and nitrous oxide emissions according to IPCC guidelines for national greenhouse gas inventory report in order to correspond to the Climate Change Convention. Ten house-made steady-state Half dome floating chambers were used to collect air samples emitted from slurry stored in the pit under the slat. Those chambers were spread out in order that air samples might represent the whole area of slurry under the slat. Fresh air was pumped into the chambers by $5{\sim}9{\ell}/min$ and air inside the chambers was sampled by $1{\ell}/min$. Surplus air by the higher flow rate of fresh air than sampling flow rate was passed through a hole on the top of chambers. Nitrous oxide fluxes measured from 10 locations would be negligible as concentrations between background air and sampled air from the chambers were within the error range. However, mean $CH_4$ fluxes were $0.15{\sim}1.02mg/m^2{\cdot}s$. The application of continuous greenhouse gas measurement techniques would be preferred if the patterns of greenhouse gas emissions are considered.