• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2010년도 추계학술대회
• /
• pp.72-74
• /
• 2010

유비쿼터스 시대의 핵심 기술인 RFID 기술은 물류현장에 많이 응용되고 있다. 이 연구에서는 현재 물류 분야에 적용되는 사례를 분석하고 차세대 RFID 물류시스템을 적용할 수 있도록 지능화된 RFID 장치를 사용하고, RFID 장치 및 물류 프로세스의 오류를 실시간으로 검출하고 보정하여 Open SCM에 적용하는 방법을 제안하였다.

• Journal of Oral Medicine and Pain
• /
• 제25권1호
• /
• pp.117-128
• /
• 2000

The present study explored the influence of temporomandibular disorders(TMD) with anterior open bite on swallowing. Fifteen subjects with anterior open bite(group A), 9 subjects with anterior open bite and TMD(group B), and 24 subjects without malocclusion or TMD symptoms (group C) were included. BioPAK system(Bioresearch Inc., Milwaukee, WI, USA) was used to record the muscle activities of anterior temporal, masseter, sternocleidomastoid(SCM) and anterior digastric muscles during maximum clenching and swallowing. Positional change of the mandible during swallowing was also recorded using the same system. The obtained results were as follows: 1. Group A, B, and C did not show significant differences each other in the muscle activity of resting position in most of head and neck muscles. 2. Group B showed significantly lower muscle activity in maximum clenching than group C in anterior temporal(p<0.01), masseter(p<0.05), SCM(p<0.05) and digastric muscles(p<0.05). 3. Group A showed significantly lower muscle activity during swallowing than group C in anterior temporal and masseter muscles(p<0.01). Group B showed significantly lower muscle activity during swallowing than group C in anterior temporal(p<0.01), masseter(p<0.01), and SCM muscles(p<0.05). 4. Group A and B showed increased positional change of the mandible during swallowing measured from vertical, anteroposterior and lateral aspects, and prolonged swallowing(p<0.05). 5. After given instructions for normal swallowing pattern, group A and B showed increased muscle activity during swallowing in anterior temporal, masseter and SCM muscles(p<0.01). Positional change of the mandible and time elapsed for swallowing also decreased after the instruction(p<0.01). 6. Occlusal splint did not change the muscle activity during swallowing. However, vertical change(p<0.01) and swallowing time(p<0.05) were decreased with splint.

• International Journal of Quality Innovation
• /
• 제5권2호
• /
• pp.132-140
• /
• 2004

Supply Chain Management (SCM) has drawn high attention and been discussed and under investigation for over two decades. However, how Hong Kong manufacturing firms carry out SCM is still unclear. In order to open the myth on what essentials are critical for SCM implementation, a large-scale questionnaire survey was conducted together with Expert Interviews in 2003. A SCM framework was then developed in which all the critical factors were summarized, categorized and prioritized to come up with a foundation for a self-assessment system for improving SCM performance.

• 대한안전경영과학회지
• /
• 제5권2호
• /
• pp.129-143
• /
• 2003

Bsusiness-to- Business transactions requires interactions between diverse application s and business. This gives rise to the need to for a common standard and protocol for exchanging busienss messages. and RosettaNet is the leading industry organization focused on developing B2B process standard for a global supply chain. This paper is intended as an investigation of Build-up Method of SCM Connection applying EC Standard(Rossetta-net) to reduce the integration effort, and improve extensibility and interoperability of an eBusiness infrastructure.-Intiative way for E-commerce applications to quickly incorporate new standards. Supply Chain Management (SCM) helps companies plan and execute supply to meet customer demand. The researches of modem scientists have thrown new light on the subject. but, The study of SCM for EC Standard has been strangely neglected by critics. Consequently, existing SCM system, which require to introduce the functions of EC, needs to be changed. Let me summarize the main points that have been made in this paper. The sharing information for connection and the Rosetta-net standard of the existing SCM system, and PIP 3A4, order management module, of the Rosetta-net specifications for connection by the Rosetta-net. Lastly, That shows the process of the gateway for connecting among the existing SCM systems. This provides felxibility in incorporating any new emerging open standard.

• 한국표면공학회지
• /
• 제52권4호
• /
• pp.233-238
• /
• 2019

The formation behavior of zinc phosphate conversion coating (ZPCC) on SCM430 alloy was investigated in 25 vol.% of 1M ZnO + 170 ml/L solution containing various $Fe(NO_3)_2$ concentrations, using open-circuit potential(OCP), electrochemical impedance spectroscopy(EIS), cyclic polarization(CP) curve and tape peel test. OCP of SCM430 alloy and corrosion current density increased with increasing $Fe(NO_3)_3$ concentration. Resistance of films formed on SCM430 alloy by chemical conversion treatment decreased with increasing $Fe(NO_3)_3$ concentration. Color and adhesion of chemical conversion coatings became darker and worse, respectively, with increasing $Fe(NO_3)_3$ concentration. It is concluded that addition of $Fe(NO_3)_3$ into a zinc phosphating bath leads to faster reaction to form porous surface coatings with poor adhesion and corrosion resistance.

• 산업공학
• /
• 제13권3호
• /
• pp.416-423
• /
• 2000

This paper considers a web-based order processing system under SCM environment. Following the framework of B2B electronic commerce, we focus on activities closely related to order handling within the supply chain. We also try to integrate the order processing system with the overall information system of the company. The methodology is applied to the case of H company and a prototype system is designed. This study analyzes the current product estimate and order handling process in the point of view of both the purchasing and the selling companies. It intends improvement by changing the existing closed way of request and offering estimate through fax or VAN into an open way using internet. For this, a company should be registered on the order site of internet. Then it can request estimate, take estimate, and handle order through internet adopting the concept of electrical commercial transaction.

• 지능정보연구
• /
• 제13권3호
• /
• pp.47-61
• /
• 2007

기업 운영에서 SCM (Supply Chain Management)의 중요성이 인식되면서 공급, 생산, 분배 등의 기능들을 통합적으로 관리하는 새로운 접근법의 필요성이 커지고 있다. 이 접근법은 여러 다른 기능들의 의사결정 문제를 하나의 통합된 최적화 모델로 분석하는 방법이다. 특히 공급사슬의 통합적인 운영을 위해서는 이전의 확정적 방법론 보다는 보다 구매자와 공급자의 관계를 유연하게 통합해 줄 수 있는 방법론이 필요하다. SCM은 대규모 문제이고 또한 다양한 내외 요인에 의해 기존의 설정된 계획 내용이나 상황이 항시 동적으로 변경될 수 있기에, 이들 정보를 통합 계획에 반영될 수 있도록 하여야 한다. 본 연구에서는 SCM의 핵심이 되는 생산계획과 분배계획 문제들을 효율적으로 통합할 수 있는 유전 알고리즘 (Genetic Algorithm)을 제시하고, 유전 알고리즘을 기반으로 동적 SCM을 위한 멀티 에이전트 시스템을 구현한다. 한편 통합계획 문제에서 유전 알고리즘을 통해 100%에 근접하는 최적해를 구하였고, 통합계획으로 얻은 결과와 통합 계획을 하지 않은 경우의 결과 값에서 큰 차이를 확인 할 수 있었다.

• 한국세라믹학회지
• /
• 제35권2호
• /
• pp.163-171
• /
• 1998

Continuously contacting with camshaft the face of Valve Lifter made of cast iron brings about abnormal wear such as unfairwear or earlywear because it is heavily loaded in the valve train systems as the engine gets more powered. This abnormal wear becomes a defet namely over-clearance when the valve is lifting so that the fuel gas imperfectly combusted by unsuitable open or close aaction of the engine valve in the combustion chamber. The imperfect combustion in the end results in the major cause of air pollution and combustion chamber. The imperfectly combusted by unsuitable open or close action of the engine valve in the combustion chamber. The imperfect combustion in the end results in the major causes of air pollution and decrease of the engine output. Consequently to prevent this wear this study was to develop the valve lifter which is joined by brazing process with SCM435H and a tip by manufacturing the face as a superhardened which is joined by brazing process with SCM435H and a tip by manufacturing the face as a superhardened ceramics alloy which has high wear resistance. Having the excellent surface hardness with Hv1100-1200 the sintered body developed with superhardened alloy(WC) can endure the severe face loading in the valve train system. We experienced with various brazing alloys and obtained the excellent joining strength to the joint had 150MPa shear strength. Interface analysis and microstructure in a joint were examined through SEM & EDS Optical microscope. Also 2,500 hours high speed(3,000-4,000 rpm) and continuous (1step 12hr) engine dynamo testing was carried out to casting valve liter and ceramics-metal joint valve lifter so that the abnormal wears were compared and evaluated.

• 한국전자거래학회지
• /
• 제13권2호
• /
• pp.181-194
• /
• 2008

프로세스 마이닝은 프로세스 실행 결과로부터 유용한 프로세스 정보를 추출하는 연구이다. BPMS, ERP, SCM 등 프로세스 인식 정보시스템들이 확산되면서 프로세스 마이닝 연구가 더욱 활발해지고 있다. 본 논문에서는 프로세스 마이닝 이전에 먼저 프로세스 로그를 군집화하는 방법과 구현 시스템을 제시한다. 본 연구의 프로세스 로그 클러스터링은 기존에 제시된 여러 가지 프로세스 마이닝 알고리즘들과 함께 사용함으로써 프로세스 마이닝의 과정을 개선시킬 수 있다. 프로세스 클러스터링 시스템은 분석 요구에 따라 적절한 개수의 프로세스 로그로 군집화함으로써 사용자가 원하는 수준의 프로세스 모델들을 추출하도록 지원한다. 프로세스 마이닝 오픈 툴인 ProM 플랫폼을 바탕으로 하여 본 논문에 제시된 프로세스 클러스터링 기법을 적용하고 개발하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.605-608
• /
• 2011

Hybrid composite membranes were prepared by coating poly(ethylene oxide) and $SiO_2$ particles onto the porous polypropylene nonwoven matrix. Gel polymer electrolytes prepared by soaking the hybrid composite membranes in an organic electrolyte solution exhibited ionic conductivities higher than $1.1{\times}10^{-3}Scm^{-1}$ at room temperature. Dyesensitized solar cell (DSSC) employing the hybrid composite membrane with PEO and 10 wt % $SiO_2$ exhibited an open circuit voltage of 0.77 V and a short circuit current of 10.78 $mAcm^{-2}$ at an incident light intensity of 100 $mWcm^{-2}$, yielding a conversion efficiency of 5.2%. DSSC employing the hybrid composite membrane showed more stable photovoltaic performance than that of the DSSC assembled with liquid electrolyte.