• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.1
• /
• pp.97-111
• /
• 2024

Developing countries and small local governments face financial constraints, limiting the adoption of their own bus information systems. However, despite poor social infrastructure and low income levels, developing countries have a high smartphone penetration rate, and the distribution and usage of online content and social media are widespread. Smartphones, equipped with GPS sensors, cameras, and other location-based information collection capabilities, can replace expensive on-site terminals. This study aims to replace expensive on-site terminals with smartphones, develop a center system based on cloud servers, and establish an extensible Open BIS (Bus Information System) service and platform that can be applied anywhere. The goal is to formulate a business model in the process.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.273-278
• /
• 2009

A series of poly[2-(2,6-dimethylpyran-4-ylidene)malononitrile-alt-1,4-bis(dodecyloxy)-2,5-divinylbenzene] (PM-PPV), poly[2-{2,6-Bis-[2-(5-bromothiophen-2-yl)-vinyl]-pyran-4-ylidene}-malononitrile-alt-1,4-bis(dodecyloxy)-2,5-divinylbenzene] (PMT-PPV) and poly[2-[2,6-Bis-(2-{4-[(4-bromophenyl)-phenylamino]-phenyl}-vinyl)-pyran-4-ylidene]-malononitrile-alt-1,4-bis(dodecyloxy)-2,5-divinylbenzene] (PMTPA-PPV) were synthesized by the Heck coupling reaction. The band gap of PM-PPV, PMT-PPV and PMTPA-PPV were 2.18 eV, 1.90 eV and 2.07 eV, respectively. The LUMO energy levels of PM-PPV, PMT-PPV and PMTPA-PPV were 3.65 eV, 3.54 eV and 3.62 eV, respectively and the HOMO energy levels of those were 5.83 eV, 5.61 eV and 5.52 eV, respectively. The photovoltaic devices based on the polymers was fabricated. The efficiency of the solar cells based on PM-PPV, PMT-PPV and PMTPA-PPV were 0.028%, 0.031% and 0.11%, respectively and the open circuit voltage (Voc) was 0.59 V~0.69 V under AM 1.5 G and 1 sun condition ($100mA/cm^2$).

• Bulletin of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.308-313
• /
• 1998

A thermally irreversible photochromic system, 2,3-bis(2,4,5-trimethyl-3-thienyl)maleic anhydride (MTMA), has been studied by semi-empirical molecular orbital methods. There are one pair of stable conformations for the closed-ring form and three pairs for the open-ring form, each pair consisting of two mirror-image conformations. Interconversion between the parallel and anti-parallel conformations of the open-ring form is restricted due to high energy barriers. Only the anti-parallel conformation appears to be responsible for photochromic cyclization. Thermostability of the compound is attributed to an avoided crossing at high energy in the ground states of the isomers, whereas the photoreactivity can be explained by the mutually connected excited singlet (S1) states of the isomers, forming a double well potential with a low energy barrier. The large solvent effects can be partly explained with the low dipole moment of the anti-parallel conformation of MTMA in the S1 state. The large variation of quantum efficiency suggests that excess vibronic energy can be utilized to provide the activation energy for the photochromic reaction.

• Analytical Science and Technology
• /
• v.13 no.6
• /
• pp.810-814
• /
• 2000

The open-chain hexadentate $N_4$, $O_2$ ligands 1, 15-bis(2-hydroxybenzyl)-2, 6, 10, 14-tetraazapentadecane (BSATPD. 4HCl) has been synthesized as its tetrahydro-chloride salt and characterized by EA, IR, NMR, and Mass spectrum. Its protonation constants ($logK_n{^H}$) and stability constants ($logK_{ML}$) for $Cu^{2+}$, $Ni^{2+}$, $Co^{2+}$ and $Zn^{2+}$ ions were determined in aqueous solution by potentiometry and compared with those of analogous $N_4$, $O_2$ ligands contain ethtylenic spacers or propylenic spacers, which make six-membered chelate rings between the aliphatic nitrogen atoms.

• Allergy, Asthma & Immunology Research
• /
• v.10 no.6
• /
• pp.686-697
• /
• 2018

Purpose: Several markers for eosinophilic inflammation have been proposed to predict response to asthma treatment. However, definitive criteria for treatment decisions have not yet been established. We investigate a potentially useful relatively non-invasive biomarker, eosinophil-derived neurotoxin (EDN), to predict favorable responses to budesonide or montelukast, common treatment for children with asthma. Methods: Young children (1 to 6 years old) were enrolled in this randomized, parallel, 2-group, open-label trial. Criteria for eligibility included: 1) being symptomatic during the run-in period; and 2) having a serum EDN (sEDN) level ${\geq}53ng/mL$, with positive specific immunoglobulin E to house dust mite. Eligible patients were randomly placed into 2 groups: the BIS group received budesonide inhalation suspension (BIS) 0.5 mg once daily; the MONT group received montelukast 4 mg once daily. Ineligible patients were invited to receive montelukast 4 mg once daily (OBS group). Treatment period was 12 weeks. Results: Asthma control days increased significantly in the BIS and MONT groups (P < 0.000) over the 12-week study period. There was no significant change in sEDN in the BIS group but there was a significant decrease in the MONT group (P < 0.000). Patients in the OBS group with high EDN levels (> 53 ng/mL) showed a significant decrease due to MONT treatment (P = 0.023). Rescue medication usage significantly decreased in the BIS and MONT groups (P < 0.000). Conclusions: EDN is a useful relatively non-invasive biomarker for predicting responses to montelukast and budesonide treatment of preschool children with beta2-agonist responsive recurrent wheeze and multiple-trigger wheeze (Trial registry at UMIN Clinical Trials Registry, UMIN000008335).

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.293-300
• /
• 2018

Reduced graphene oxide (rGO) nanosheets were patterned with poly[benzodithiophene-bis(decyltetradecyl-thien) naphthothiadiazole] (PBDT-DTNT) and poly[bis(triiso-propylsilylethynyl) benzodithiophene-bis(decyltetradecyl-thien) naphthobisthiadiazole] (PBDT-TIPS-DTNT-DT) and used in photovoltaics. Conductive patternings changed via surface modification of rGO; because polymers encountered a high hindrance while assembling onto grafted rGO. The best records were detected in indium tin oxide (ITO):poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS):PBDTDTNT/rGO:PBDT-DTNT:LiF:Al devices, i.e., short current density $(J_{sc})=11.18mA/cm^2$, open circuit voltage $(V_{oc})=0.67V$, fill factor (FF) = 62% and power conversion efficiency (PCE) = 4.64%. PCE increased 2.31 folds after incorporation of PBDT-DTNT into thin films. Larger polymer assemblies on bared-rGO nanosheets resulted in greater phase separations.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.518-525
• /
• 2000

The open-chain hexadentate N$_4$, O$_2$ ligands 1,13-bis(2-hydroxybenzyl)-2,5,9,12-tetraazatridecane-tetrahydrochloride (BSATD${\cdot}$4HCl) and 1,14-bis (2-hydroxybenzyl)-2,6,9,12-tetraazatetradecane-tetrahydrochloride (BSATED${\cdot}$ 4HCl) have been synthesized as their tetrahydrochloride salt and characterized by EA, IR, NMR and Mass. Their proton dissociation constants(log$K^{n}_{H}$) and stability constants(log$K_{ML}$) for Cu(II), Ni(II), Co(II), and Zn(II) ions were determined in aqueous solution by potentiometry and compared with those of analogous N$_4$, O$_2$ ligands contain ethylenic spacers or propylenic spacers, which make six-membered chelate rings between the aliphatic nitrogen atoms. Synthesis and characterization of [Cu(BSATD)]ClO$_4$ and [Cu(BSATED)](ClO$_4$)$_2$ complexes are described.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.137-141
• /
• 2010

Poly [4,7-Di-thiophen-2-yl-benzo(1,2,5)thiadiazole]-alt-1,4-bis(dodecyloxy)-2,5-divinylbenzene (PPVTBT) was synthesized by the Heck coupling reaction between 4,7-Di-thiophen-2-yl-benzo(1,2,5)thiadiazole and 1,4-bis(dodecyloxy)-2,5-divinylbenzene. The maximum absorption and band gap of PPVTBT were 550 nm and 1.74 eV, respectively. The HOMO and LUMO energy level of PPVTBT were -5.24 eV and -3.50 eV, respectively. The photovoltaic device based on the blend of PPVTBT and (6)-1-(3-(methoxycarbonyl)propyl)-{5}-1-phenyl[5,6]-$C_{61}$ (PCBM) (1 : 6 by weight ratio) was fabricated. The efficiency of device was 0.16%. The short circuit current density (Jsc), fill factor (FF) and open-circuit voltage (Voc) of the device was $0.74mA/cm^{2}$, 31% and 0.71 V, respectively, under AM 1.5 G and 1 sun condition ($100mA/cm^{2}$).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.3
• /
• pp.252-256
• /
• 2013

We introduced sensitizing dyes into the bulk-heterojunction (BHJ) photovoltaic (PV) layer of polymer solar cells (PSCs). The sensitizing dyes doped were Bis(tetra butyl ammonium) cis-dithio cyanato bis(2,2'-bipyridine-4-carboxylicacid-4'-carboxylate) ruthenium (II) (N719 dye) and the BHJ PV layer used was made of poly (3-hexylthiophene) (P3HT) and phenyl $C_{61}$-butyric acid methyl ester (PCBM). It was found that the N719 dyes increase the photovoltaic performance, i.e., increasing open-circuit voltage and short-circuit current density with improved fill factor. For the P3HT:PCBM PV cells doped with the N719 dyes (0.24 wt%), an increase in power conversion efficiency of 4.0% was achieved, compared to that of the control cells (3.6%) without the N719 dyes.

• Korean Journal of Materials Research
• /
• v.20 no.9
• /
• pp.483-487
• /
• 2010

To fabricate $TiO_2$ nanoparticle-based dye sensitized solar cells (DSSCs) at a low-temperature, DSSCs were fabricated using hydropolymer and ZnO nanoparticles composites for the electron transport layer around a low-temperature ($200^{\circ}C$). ZnO nanoparticle with 20 nm and 60 nm diameter were used and Pt was deposited as a counter electrode on ITO/glass using an RF magnetron sputtering. We investigate the effect of ZnO nanoparticle concentration in hydropolymer and ZnO nanoparticle solution on the photoconversion performance of the low temperature fabricated ($200^{\circ}C$) DSSCs. Using cis-bis(isothiocyanato)bis(2,20 bipyridy1-4,40 dicarboxylato) ruthenium (II) bis-tetrabutylammonium (N719) dye as a sensitizer, the corresponding device performance and photo-physical characteristics are investigated through conventional physical characterization techniques. The effect of thickness of the ZnO photoelectrode and the morphology of the ZnO nanoparticles with the variations of hydropolymer to ZnO ratio on the photoconversion performance are also investigated. The morphology of the ZnO layer after sintering was examined using a field emission scanning electron microscope (FE-SEM). 60 nm ZnO nanoparticle DSSCs showed an incident photon-to-current conversion efficiency (IPCE) value of about 7% higher than that of 20 nm ZnO nanoparticle DSSCs. The maximum parameters of the short circuit current density ($J_{sc}$), the open circuit potential ($V_{oc}$), fill factor (ff), and efficiency ($\eta$) in the 60 nm ZnO nanoparticle-based DSSC devices were 4.93 mA/$cm^2$, 0.56V, 0.40, and 1.12%, respectively.