• Journal of IKEEE
• /
• 제19권3호
• /
• pp.319-326
• /
• 2015

This paper proposes method about development of conversion software for controller without OPC stack to communicate with OPC DA client. The proposed method is composed of development of OPC server based on OPC DA standard protocol, development of GUI application can be checked the OPC tag and point informations, development of conversion module to convert from OPC protocol to open standard protocol. In the stage of development of OPC server based on OPC DA standard protocol, we develope server in the pc to transmit and receive datum through OPC DA protocol with OPC DA client. In the stage of evelopment of GUI application can be checked the OPC tag and point informations, run the OPC DA server and register to window system registry and check OPC tags, points, transmitting and receiving of data from serial communication. In the stage of development of conversion module to convert from OPC protocol to open standard protocol, convert from OPC tag data which has received from OPC DA client to protocol can be communicated with industrial controller using open standard protocol so that support to transmit and receive data. To evaluate the efficiency of the proposed software, we connected OPC DA server software and OPC client, and 5 sample industrial controller which use open standard protocol, as a result we got 96.98% average communication succeeding rate among entire transmitting and receiving packets. We also confirmed that successfully communicated between industrial building controller which uses modbus protocol and industrial OPC DA client using OPC DA conversion software proposed by this dissertation.

• Proceedings of the Korean Information Science Society Conference
• /
• 한국정보과학회 2006년도 한국컴퓨터종합학술대회 논문집 Vol.33 No.1 (A)
• /
• pp.250-252
• /
• 2006

Web technologies are gaining increased importance in automation and control systems. However, the choice of Web technologies depends on the use cases in the application environment. In industrial systems, the data can be got not only from many different field systems and devices but also from different OPC (OLE for Process Control) Servers. Current OPC Client might be able to read simple data from OPC Server, but there are some problems to get structured data and to exchange structured information between collaborating applications. Therefore, OPC Foundation has defined interfaces to OPC XML-DA (OPC XML Data Access) and OPC Complex Data that aim to solve those problems. The OPC XML-DA can facilitate the exchange of plant data across the internet, and upwards into the enterprise domain. In addition, the OPC Complex Data will extend the OPC DA specification to allow the OPC Client to read and decode any type of data from measurement and control systems on the plant floor. This paper will describe the concept of OPC XML-DA and OPC Complex Data. And then it proposes a mechanism to implement the OPC Complex Data into OPC XML-DA Server. Additionally, the paper also discusses the security aspects.

• Journal of IKEEE
• /
• 제25권2호
• /
• pp.291-301
• /
• 2021

OPC UA at the control and field level does not provide enough performance to replace the field bus. The OPC Foundation aims for a real-time and connection-less mechanism, and has added the OPC UA publish-subscribe model, a new specification that supports broker functions such as MQTT and AMQP, as the OPC UA Part 14 standard. This paper is about a gateway for interoperability between OPC UA publisher with the addition of OPC UA Part14 standard and DDS subscribers. Raspberry Pi 4 is used for the gateway proposed in this paper, and OpenDDS, an open source, is used for DDS. OPC UA publish-subscribe module used A-Open62541 publish-subscribe module, which additionally implements functions not provided by the corresponding source based on Open62541 publish-subscribe open source.

• Journal of information and communication convergence engineering
• /
• 제14권2호
• /
• pp.71-77
• /
• 2016

The combination of dispersion management (DM) and midway optical phase conjugation (OPC) is one of the promising techniques for compensating for optical signal distortion due to group velocity dispersion and nonlinear fiber effects. However, in this combination technique, midway OPC restricts the flexible optical link configuration. Therefore, the possibility of implementing the flexible optical link configuration with non-midway OPC applied to complete inline DM links is investigated in this study. It is confirmed that although the compensation using non-midway OPC for the distorted WDM channels is less effective than that using midway OPC, when non-midway OPC is placed at positions closer to the transmitters, the deployment of precompensation (i.e., the sequence of DCF + SMF)-OPC-postcompensation (i.e., the sequence of SMF + DCF) is more advantageous for the compensation. On the other hand, inverse deployment with respect to OPC (i.e., postcompensation-OPC-precompensation) is more advantageous when non-midway OPC is placed at positions closer to the receivers.

• Journal of Institute of Control, Robotics and Systems
• /
• 제11권11호
• /
• pp.970-976
• /
• 2005

OPC has made it to improve the development of control and monitoring software. But it is difficult to understand COM/DCOM model that is a base technology of OPC and complex communication setting between OPC Server and OPC Client. Therefore, in this paper, we design and implement ActiveX based components that are enable to solve these problems. Implemented components provide a method for simple communication between OPC Sewer and OPC Client and a GUI environment for easy and fast setting of communication information. Also, they provide the architecture fur efficient management of OPC Server's data. By using implemented component, easy development and efficient maintenance of OPC Client can be supported.

• Journal of the Korean Graphic Arts Communication Society
• /
• 제16권3호
• /
• pp.43-60
• /
• 1998

The photosensitive properties and spectroscopic characteristics in the organic photoconductor(OPC) with carrier generation layer(CGL) of poly(vinylbutyral)(PVB) and polycarbonate(PC) doped with titanyl phthalocyanine(TiOPc) were investigated. The change of crystal structure of TiOPc dispersed with PVB and PC was shown by UV-visible reflective spectrum and FT-IR spectrum and mainly caused by the difference of solubility of solvent and the interaction between TiOPc and binder. The particle size of TiOPc dispersed with PVB measured by SEM was smaller than in PC. The crystal structure of TiOPc dispersed with PVB was amorphous type and in PC was $\alpha$type. It was found that the photosensitive properties of OPC were dependent on the change of absorbance and ionization potential of TiOPc occurred from the difference of crystal structure. In this work, the photosensitivity of OPC of TiOPc dispersed with PVB was better than PC due to the crystal type and the smaller particle size.

• Journal of Institute of Control, Robotics and Systems
• /
• 제14권5호
• /
• pp.411-414
• /
• 2008

OPC is the preferred communication standard for sharing process control data at all levels of the enterprise and becomes the global standard, sends/receives the data with PLC programs of inspection system via network, and manages various data using OPC server. In this paper, we introduce the developed OPC client system for FPD inspection system with OPC server. To control inspection system through OPC server, we have developed libraries which consist of stage driver, switch driver, microscope driver, image processing, alignment, and task management modules. Also we have developed the test program to verify all functions precisely. We describe the mechanism of inspection system, OPC connection method, and programs.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.621-623
• /
• 2005

OPC has made it to improve the development of control and monitoring software. But it is difficult to understand COM/DCOM model that is a base technology of OPC and complex communication setting between OPC Server and OPC Client. Therefore, in this paper, we design and implement ActiveX based components that are enable to solve these problems. Implemented components provide a method for simple communication between OPC Server and OPC Client and a GUI environment for easy and fast setting of communication information. Also, they provide the architecture for efficient management of OPC Server's data. By using implemented component, easy development and efficient maintenance of OPC Client can be supported.

• Journal of the Korean Ceramic Society
• /
• 제42권11호
• /
• pp.737-742
• /
• 2005

Rheological properties of ordinary portland cement (OPC) containing metakaoline (MK), granulated blast furnace slag (GBS) and polycarboxylate type superplasticizer (PCA) were investigated using a mini-slump test, sedimentation test and viscometer. Fluidity of cement pastes containing MK (OPC-MK, OPC-MK-GBS systems) with PCA were higher than those of the cement pastes without MK(OPC, OPC-GBS systems). Colloid suspensions with $0.1\%$ PCA were changed from stable sedimentation behaviors to flocculation behaviors in the OPC-MK, OPC-GBS and OPC-MK-GBS systems. The colloid suspensions showed stable sedimentation behaviors with PCA greater than $0.2\%$. The OPC system showed shear thinning behavior. However, the other systems showed weak shear thinning behaviors with PCA. Rheological properties of cement pastes were improved when MK and GBS were contained together. The rheological properties of OPC-MK, OPC-GBS and OPC-MK-GBS systems were improved by PCA added greater than $0.2\%$.

• Journal of IKEEE
• /
• 제14권2호
• /
• pp.33-40
• /
• 2010

OPC is open connectivity in industrial automation and the enterprise systems that support industry. OPC XML-DA provides a platform-independent on web service-based communication. This paper propose Power IT system integration platform using OPC that is to integration between DLMS protocol used in AMI system and Distribute protocol DNP3.0 throught IEC61850 using Substation Automation Protocol.