• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.115-116
• /
• 2020

Due to the nature of modern society, buildings are becoming larger and more complex. As a result, the design conditions of the building are changing. However, despite the complexities of buildings, the fire resistance performance is still equalized to one hour without considering fire engineering analysis in Korea, so there is a risk according to actual fire design conditions. Therefore, the purpose of this study is to calculate the required fire resistance time for actual fire through fire mechanics analysis and case study.

• Steel and Composite Structures
• /
• 제8권6호
• /
• pp.491-510
• /
• 2008

This paper presents a plan and guidelines that were drawn for Korean based research carried out on the fire-resistance of CFT columns. This research was carried out by reviewing the Korean regulations related to the fire-resistance of CFT columns and examining studies which had been made in Korea as well as overseas. The first phase of the study plan was to compare the fire-resistance of square CFT columns without fire protection (obtained through fire-resistance tests and numerical analyses) with estimated values (obtained through fire-resistance design formulas proposed in Korea and overseas). This comparison provided conclusions as outlined below. Fire-resistance tests conducted in this study proved that, when the actual design load is taken into consideration, square CFT columns without fire protection are able to resist a fire for more than one hour. A comparison was made of test and analysis results with the fire-resistance time based on the AIJ code, the AISC design formula and the estimation formula suggested for Korea. The results of this comparison showed that the test and analysis results for specimens SAH1, SAH2-1, SAH2-2 and SAH3 were almost identical with the AIJ code, the AISC design formula and estimation formula. For specimens SAH4 and SAH5, the estimation formula was more conservative than the AIJ code and the AISC design formula. It was necessary to identify the factors that have an influence on the fire-resistance of CFT columns without fire protection and to draw fire-resistance design formulas for these columns. To achieve this, it is proposed that numerical analyses and tests be conducted in order to evaluate the fire-resistance of circular CFT columns, the influence of eccentricity existing as an additional factor and the influence of the slenderness ratio of the columns. It is also suggested that the overall behavior of CFT structures without fire protection within a fire be evaluated through analysis simulation.

• 한국가구학회지
• /
• 제24권4호
• /
• pp.426-432
• /
• 2013

Fire resistance and impact sound insulation tests were performed for a floor assembly, of which stiffness was reinforced by shortening the span of floor joists by installing glulam beam additionally in the middle or one thirds of the original span, and which an additional ceiling component was installed apart from floor structure. By applying the isolated ceiling, timber framed floor showed 1 hour of fire resistance even in case that dead load was increased by considering cement mortar layer for radiant floor heating. Insulation performance against light and heavy impact sound was improved significantly by applying the sound absorbing layer of big mass and high elasticity in addition to the stiffness improvement and isolated ceiling.

• 복합신소재구조학회 논문집
• /
• 제3권2호
• /
• pp.36-46
• /
• 2012

Structure Insulated Panel (SIP) is an wooden structure material with which structure and insulation functions are satisfied. Hence, it would be a cost-effective model to implement low energy house which has higher insulation and structure performance and which the wall thickness is able to be reduced. In this study, performance of thermal insulation and fire resistance were evaluated in order to verify applicability to low energy house. Fire resistance test is performed on vertical load bearing members for partitions, and the test results satisfy one hour of fire resistance condition according to KS F 2257. The members include two layers of fireproof gypsum board with thicknesses of 12.5mm attached to SIP. Thermal insulation performance is satisfied with the 2012 standard ($0.225W/m^2{\cdot}K$). As the performance of resistance and thermal insulation are satisfied, SIP is expected to be applied to low energy building materials. In the future, the structural safety will be confirmed by structural performance and seismic performance test and the guidelines for distribution will be drawn up.

• 한국강구조학회 논문집
• /
• 제22권6호
• /
• pp.581-588
• /
• 2010

최근 강구조 건축물에 대한 상온 및 화재 시의 구조거동에 관한 요구사항이 증대되는 추세에 있으며, 내화구조에 관한 요구조건을 충족시키기 위해서는 내화설계가 요구된다. 내화설계에는 법규, 기준 등에 따라 평가되는 시방적 내화설계와 화재 발생 시 구조물 거동을 평가하는 성능기반 공학적 내화설계로 대별된다. 현재 성능기반 공학적 내화설계는 세계적인 추세로 활발히 적용되고 있으나, 국내에서는 아직 적용되지 못하는 실정이다. 따라서 본 논문에서는 성능 기반 공학적 내화설계의 지침 마련의 기반자료 확보를 위하여 H-형강 보부재와 H형강의 웨브에 콘크리트로 충전된 보부재를 대상으로 한계온도 설정을 목적으로 한다. 재하가열시험을 통하여 H-형강 보부재의 한계온도를 도출하였고, 한계온도는 적용 하중비에 좌우되는 것을 확인하였다. H-형강 웨브에 콘크리트가 충전된 하중비 80%, 60% 및 50%의 시험체는 모두 3시간의 내화성능을 보였다.

• 한국화재소방학회논문지
• /
• 제34권4호
• /
• pp.52-58
• /
• 2020

노인인구의 증가와 맞벌이부부의 증가로 인한 노인부양방식의 변화로 중풍환자와 치매노인을 돌보는 노인의료복지시설이 급증하고 있다. 이러한 노인의료복지시설은 주로 도시의 주변에 설치되고 있으며 점차 고층화 되어가고 있다. 관리자가 최소인 야간에 화재발생 시 스스로 판단하여 대피할 수 있는 입소자들이 거의 없으며 경사로등 입소자를 대피시킬 수 있는 피난로가 없어 대형의 인명피해가 발생할 수 있다. 본 논문에서는 단위면적당 노인의료복지시설이 가장 많은 고양시를 중심으로 노인의료복지시설의 피난 상의 문제점을 파악하고 이에 대한 대안으로 경사로를 확보하거나 침대피난용 승강기를 확보하고, 입소자들의 침실을 한 시간 내화로 방화구획하며, 계단을 피난계단의 구조로 하며, 구조대 설치 등 피난에 필요한 시설들의 설치 및 주변기관과 화재 시 상호협력 하는 업무협약을 체결할 것을 제안하였다. 국가는 국민의 생명과 재산을 보호하는데 필요한 방안을 제시하여야 한다. 날로 증가되어가는 의료복지시설의 피난안전을 위하여 본 제안의 신속한 적용이 필요하다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.95-98
• /
• 2006

This study investigates spalling properties of high performance concrete, 60MPa clan, made with the various types of coarse aggregate and adding ratio of polypropylene(PP) fiber. As experimental parameters, totally sixteen specimens of ${\phi}100{\times}200mm$ in size are prepared: one specimen for control without fiber, ten specimens with different coarse aggregate types, along with 0.05, 0.1, 0.15 percent of PP fiber in each. 1 hour fire test is conducted and then spalling appearance, spalling degree and residual compressive strength are examined. In addition, sit specimens made with two types of coarse aggregate site, along with same adding ratio of fiber are supplementally done, and only spalling properties is examined. Test results showed that control concrete and most specimens containing 0.05% of PP fiber exhibited 4 to 3 level of spalling degree, resulting severe explosive spalling, except for the specimen using basalt aggregate(Bc) showing 2 to 3 level of that. Especially, the Bc specimen containing 0.1% of the fiber exhibited that residual compressive strength value was 32%, which is 10% higher than other specimens using limestone or granite. Spalling resistance performance was also effective as aggregate size increase.

• Safety and Health at Work
• /
• 제14권4호
• /
• pp.457-466
• /
• 2023

Background: During hot environment work tasks with whole-body enclosed anti-bioaerosol suit, the combined effect of heavy sweating and exhaled hot humid air may cause the N95 medical respirator to saturate with water/sweat (i.e., water-blocking). Methods: 32 young male subjects with different body mass indexes (BMI) in whole-body protection (N95 medical respirator + one-piece protective suit + head covering + protective face screen + gloves + shoe covers) were asked to simulate waste collecting from each isolated room in a seven-story building at 27-28℃, and the weight, inhalation resistance (R_f), and aerosol penetration of the respirator before worn and after water-blocking were analyzed. Results: All subjects reported water-blocking asphyxia of the N95 respirators within 36-67 min of the task. When water-blocking occurred, the R_f and 10-200 nm total aerosol penetration (P_t) of the respirators reached up to 1270-1810 Pa and 17.3-23.3%, respectively, which were 10 and 8 times of that before wearing. The most penetration particle size of the respirators increased from 49-65 nm before worn to 115-154 nm under water-blocking condition, and the corresponding maximum size-dependent aerosol penetration increased from 2.5-3.5% to 20-27%. With the increase of BMI, the water-blocking occurrence time firstly increased then reduced, while the R_f, P_t, and absorbed water all increased significantly. Conclusions: This study reveals respirator water-blocking and its serious negative impacts on respiratory protection. When performing moderate-to-high-load tasks with whole-body protection in a hot environment, it is recommended that respirator be replaced with a new one at least every hour to avoid water-blocking asphyxia.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.103-106
• /
• 2006

This study investigates spalling properties of 60MPa class, high performance concrete, made with the various influential parameters, such as, blaine of cement, mineral admixture and polypropylene(PP) fiber contents. Totally 21 parameters of ${\phi}100{\times}200mm$ in size was fabricated; three specimens for variance in blaine of cement, 4 specimens for combination of mineral admixture type, along with 0.05, 0.1, 0.15% of fiber adding ratio. After that, one hour unloading fire test was conducted, and then spalling appearance and spalling degree of specimens was examined. Test showed that a specimen made with high blaine of cement(H) improved early strength but exhibited similar value to a specimen made with low blaine(L) at the age of 28 days, thus indicating comparable spalling appearance. In conclusion, spalling easily occur in higher strength and smaller particle shape of cement and mineral admixture.

• 한국항공우주학회지
• /
• 제48권1호
• /
• pp.81-88
• /
• 2020

비행기록장치는 항공기 사고 조사를 위해 필요한 데이터를 저장하는 장비로 ED-112A 규격을 준수하여 개발되어야 한다. 비행기록장치는 일반 데이터 저장 장비와 달리 항공기 사고 후에도 데이터 복원이 가능해야 함으로 극한환경에서 데이터를 보호할 수 있는 하우징과 메모리 보드가 필요하다. 이를 위해 본 논문에서는 극한환경시험의 충격, 전단/인장, 관통, 압박 시험의 물리적 환경을 분석하여 시험을 견딜 수 있는 하우징을 설계하였고 항공기 장착을 고려하여 기존 대비 크기 및 중량을 최소화하였다. 고온화재, 저온화재에 견딜 수 있도록 단열재와 상변환물질을 적용하여 260도, 10시간 환경에서도 150도 이상으로 내부 온도가 상승하지 않도록 설계하였다. 또한 메모리 보드도 크기를 최소화하고 Hoping Programming 방식을 고안하여 16초 이상의 연속 데이터 손실을 방지할 수 있도록 설계하였다. 이를 통해 ED-112A를 만족하는 충돌보호메모리모듈을 제작에서 시험까지 완료하였다.