• 융합정보논문지
• /
• 제10권10호
• /
• pp.47-52
• /
• 2020

일반적인 평판 프린터 시스템은 PC와 전용 S/W로 구성되어 사용에 불편함이 존재한다. 결국, 평판 프린터 시스템 구성의 간소화, 스마트화 등을 통해 다양한 형태의 프린팅을 쉽고 편리하게 사용할 수 있는 기술이 필요하다. 즉, 한 대의 프린터로 여러 종류의 소재에 인쇄가 가능하며, 다양한 형태의 상품을 인쇄할 수 있는 다입체 프린터에 대한 수요가 증가하고 있다. 따라서, 본 논문에서는 Head Encoder/Trigger 제어를 이용하여 다입체 인쇄가 가능한 평판 프린터 시스템을 개발하였다. 이를 위해, 평판 프린터 내부 모듈을 입력 형태 감지 센서를 연계시키고, 별도의 메인 콘트롤러를 통해 프린터의 Head Encoder와 Head Trigger 신호에 의해 모든 동작 상태를 제어하는 평판 프린터를 개발하였다. 이를 통해, IoT 기술의 발전 및 보급의 확산으로 산업 전반에 걸쳐 스마트 환경의 프린터 제어가 발전된 형태로 확대될 것이며, 향후 3D 프린팅 산업 발전에 기여할 것으로 기대된다.

• 한국통신학회논문지
• /
• 제29권2B호
• /
• pp.272-278
• /
• 2004

EPON(Ethernet Passive Optical Network)은 FTTH(Fiber To The Home)구성에 경제적인 기술로서, 차세대 가입자망 구성중 하나로 활발히 연구되고 있다. EPON은 Ethernet을 기반으로 하고 있기 때문에 QoS(Quality of Service) 지원을 위해서는 가입자에게 동적대역폭할당을 적용해야 한다. 최근 EPON 표준화에 대해 활발히 연구하고 있는 EFM SG 방향 역시 동적대역폭할당으로 결정한바 있다. 따라서 본 논문에서는 EPON의 MAC(Media Access Control) 프로토콜인 MPCP(Multi Point Control Protocol)에서 DBA(Dynamic Bandwidth Allocation)의 구현에 적합한 ONU(Optical Network Unit) 버퍼 스케줄링 알고리즘(AIWFQ)과 OLT(Optical Line Terminal)의 DBA 전략(Class-based FCFS)을 설계한다. 본 논문에서 제안한 알고리즘의 구현을 위해서 OPNET 시뮬레이션 도구를 이용하였으며, 단대단 처리지연 시간과 버퍼크기를 측정하여 EPON 시스템의 모델로 활용할 수 있는 방안을 제시한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권4호
• /
• pp.1256-1275
• /
• 2014

As one of the new self-organizing and self-configuration broadband networks, wireless mesh networks are being increasingly attractive. In order to solve the load balancing problem in wireless mesh networks, this paper proposes a novel multi-path routing algorithm based on clustering (Cluster_MMesh) for wireless mesh networks. In the clustering stage, on the basis of the maximum connectivity clustering algorithm and k-hop clustering algorithm, according to the idea of maximum connectivity, a new concept of node connectivity degree is proposed in this paper, which can make the selection of cluster head more simple and reasonable. While clustering, the node which has less expected load in the candidate border gateway node set will be selected as the border gateway node. In the multi-path routing establishment stage, we use the intra-clustering multi-path routing algorithm and inter-clustering multi-path routing algorithm to establish multi-path routing from the source node to the destination node. At last, in the traffic allocation stage, we will use the virtual disjoint multi-path model (Vdmp) to allocate the network traffic. Simulation results show that the Cluster_MMesh routing algorithm can help increase the packet delivery rate, reduce the average end to end delay, and improve the network performance.

• ETRI Journal
• /
• 제35권5호
• /
• pp.786-796
• /
• 2013

In this paper, we propose a hybrid time-division multiplexing and dense wavelength-division multiplexing scheme to implement a cost-effective and scalable long-reach optical access network (LR-OAN). Our main objectives are to increase fiber plant utilization, handle upstream and downstream flow through the same input/output port, extend the reach, and increase the splitting ratio. To this end, we propose the use of an arrayed waveguide grating (AWG) and an erbium-doped fiber amplifier (EDFA) in one configuration. AWG is employed to achieve the first and second objectives, while EDFA is used to achieve the third and fourth objectives. The performance of the proposed LR-OAN is verified using the Optisystem and Matlab software packages under bit error rate constraints and two different approaches (multifiber and single-fiber). Although the single-fiber approach offers a more cost-effective solution because service is provided to each zone via a common fiber, it imposes additional losses, which leads to a reduction in the length of the feeder fiber from 20 km to 10 km.

• Journal of electromagnetic engineering and science
• /
• 제17권3호
• /
• pp.138-146
• /
• 2017

A phase-locked dielectric resonator oscillator (PLDRO) is an essential component of millimeter-wave communication, in which phase noise is critical for satisfactory performance. The general structure of a PLDRO typically includes a dual loop of digital phase-locked loop (PLL) and analog PLL. A dual-loop PLDRO structure is generally used. The digital PLL generates an internal voltage controlled crystal oscillator (VCXO) frequency locked to an external reference frequency, and the analog PLL loop generates a DRO frequency locked to an internal VCXO frequency. A dual loop is used to ease the phase-locked frequency by using an internal VCXO. However, some of the output frequencies in each PLL structure worsen the phase noise because of the N divider ratio increase in the digital phase-locked loop integrated circuit. This study examines the design aspects of an interconnected PLL structure. In the proposed structure, the voltage tuning; which uses a varactor diode for the phase tracking of VCXO to match with the external reference) port of the VCXO in the digital PLL is controlled by one output port of the frequency divider in the analog PLL. We compare the proposed scheme with a typical PLDRO in terms of phase noise to show that the proposed structure has no performance degradation.

• Geomechanics and Engineering
• /
• 제16권4호
• /
• pp.449-461
• /
• 2018

The load sharing ratio (${\alpha}_{pr}$) of piles is one of the most common problems in the preliminary design of piled raft foundations. A series of 3D numerical analysis are conducted so that special attentions are given to load sharing characteristics under varying conditions, such as pile configuration, pile diameter, pile length, raft thickness, and settlement level. Based on the 3D FE analysis, influencing factors on load sharing behavior of piled raft are investigated. As a result, it is shown that the load sharing ratio of piled raft decreases with increasing settlement level. The load sharing ratio is not only highly dependent on the system geometries of the foundation but also on the settlement level. Based on the results of parametric studies, the load sharing ratio is proposed as a function of the various influencing factors. In addition, the parametric analyses suggest that the load sharing ratios to minimize the differential settlement of piled raft are ranging from 15 to 48% for friction pile and from 15 to 54% for end-bearing pile. The recommendations can provide a basis for an optimum design that would be applicable to piled rafts taking into account the load sharing characteristics.

• 제어로봇시스템학회논문지
• /
• 제6권2호
• /
• pp.190-196
• /
• 2000

A hybrid position/force control scheme to regulate the force and position by dual arms is proposed where two arms are treated as one rm in a kinematic viewpoint. The force error calculated from the information of two force/torque sensors attached to the end of each arm is transferred to minimum configuration space coordinates and then is distributed to total system joint coordinates, The position adjustment at the total con-figuration coordinates is computed based on the effective compliance matrix with respect to total joint coordinates which is obtained by coordinate transformation between the task coordinates and the total joint coordinates. The proposed scheme is applied to sawing task. When the trajectory of the saw is planned to follow a line in a horizontal plane 2 position parameters are to be controlled(i.e., two translational positions) Also a certain level of contact force has to be controlled along the vertical direction(i.e. minus z-direction) not to loose the contact with the object to be sawn. We experimentally show that the performance of the velocity and force response are satisfactory. The proposed hybrid control scheme can be applied to arbitrary two cooperating arm system regardless of their kinematic structure and the number of actuated joints.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권4호
• /
• pp.500-505
• /
• 2011

본 논문에서는 콜리메이터를 이용한 투과형과 반사형의 마이크로 광학형 누수감지 센서 시스템을 제안하고 실험하였다. 센서는 빛을 송신하고 수신하는 두 개의 콜리메이터가 10 mm 정도 떨어져서 마주보는 형태로 구현되어졌다. 센서가 공기 중에 노출된 경우 송신 콜리메이터에 나온 빛은 공기를 투과하여 수신 콜리메이터로 전송되어 일정한 출력 광 전력을 유지한다. 그러나 액체속에서는 송신된 빛이 산란되어 수신단으로 전달되지 못하므로 침수를 감지한다. 반사형의 경우 광섬유형 격자를 센서 끝단에 설치함으로서 센서에서 반응한 광 출력 정보가 입력단으로 다시 되돌아 올 수 있게 하여 시스템의 모니터링 구조를 단순화 하였다. 또한 두 시스템의 동작 특성을 비교하여 제시하였다.

• 천문학회보
• /
• 제37권1호
• /
• pp.66.1-66.1
• /
• 2012

We have developed superconducting mixer receivers for 129 GHz VLBI observation in Korean VLBI Network(KVN). The developed mixer has a radial waveguide probe with simple transmission line LC transformer as a tuning circuit to its 5 series-connected junctions, which can have 125-165 GHz as operation RF frequency. For IF signal path a high impedance quarter-wavelength line connects the probe to one end of symmetric RF chokes. DSB receiver noise of the mixer was about 40 K over 4-6 GHz IF band whereas we achieved about uncorrected SSB noise temperature of 70 K and better than 10 dB IRR in 2SB configuration with 8-10 GHz IF band. Insert-type receiver cartridges using the mixers have been assembled for all three KVN stations. On-site performance summary in commissioning phase is presented.

• 소성∙가공
• /
• 제17권3호
• /
• pp.182-188
• /
• 2008

Crash box is one of the most important automotive parts for crash energy absorption and is equipped at the front end of the front side member. The specific characteristics of aluminum alloys offer the possibility to design cost-effective lightweight structures with high stiffness and excellent crash energy absorption potential. This study deals with crashworthiness of aluminum crash box for an auto-body with the various types of cross section. For aluminum alloys, A17003-T7 and A17003-T5, the dynamic tensile test was carried out to apply for crash analysis at the range of strain from 0.003/sec to 200/sec. The crash analysis and the crash test were carried out for three cross sections of rectangle, hexagon and octagon. The analysis results show that the octagon cross section shape with A17003-T5 has higher crashworthiness than other cross section shapes. The effect of rib shapes in the cross section is important factor in crash analysis. Finally, new configuration of crash box with high crash energy absorption was suggested.